GraphicsDisplay / UniGraphic

Basically i glued Peter Drescher and Simon Ford libs in a GraphicsDisplay class, then derived TFT or LCD class (which inherits Protocols class), then the most derived ones (Inits), which are per-display and are the only part needed to be adapted to diff hw.

Dependents:   testUniGraphic_150217 maze_TFT_MMA8451Q TFT_test_frdm-kl25z TFT_test_NUCLEO-F411RE ... more

Diff: Inits/S6D04D1.h

Revision:
29:866213bb9bf0
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Inits/S6D04D1.h	Sat Nov 28 18:37:19 2015 +0000
@@ -0,0 +1,75 @@
+#ifndef MBED_S6D04D1_H
+#define MBED_S6D04D1_H
+
+
+
+#include "mbed.h"
+#include "TFT.h"
+
+/** Class for S6D04D1 TFT display controller
+* for BM8K5113 TFT1P3520-E TFT8K5113FPC-A1-E and TFT1P3520
+* to be copypasted and adapted for other controllers
+*/
+class S6D04D1 : public TFT
+{
+ 
+ public:
+
+    /** Create a PAR display interface
+    * @param displayproto PAR_8 or PAR_16
+    * @param port GPIO port name to use
+    * @param CS pin connected to CS of display
+    * @param reset pin connected to RESET of display
+    * @param DC pin connected to data/command of display
+    * @param WR pin connected to SDI of display
+    * @param RD pin connected to RS of display
+    * @param name The name used by the parent class to access the interface
+    * @param LCDSIZE_X x size in pixel - optional
+    * @param LCDSIZE_Y y size in pixel - optional
+    */ 
+    S6D04D1(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name , unsigned int LCDSIZE_X = 240, unsigned  int LCDSIZE_Y = 400);
+    
+    /** Create a BUS display interface
+    * @param displayproto BUS_8 or BUS_16
+    * @param buspins array of PinName to group as Bus
+    * @param CS pin connected to CS of display
+    * @param reset pin connected to RESET of display
+    * @param DC pin connected to data/command of display
+    * @param WR pin connected to SDI of display
+    * @param RD pin connected to RS of display
+    * @param name The name used by the parent class to access the interface
+    * @param LCDSIZE_X x size in pixel - optional
+    * @param LCDSIZE_Y y size in pixel - optional
+    */ 
+    S6D04D1(proto_t displayproto, PinName* buspins, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name ,const unsigned int LCDSIZE_X = 240, unsigned  int LCDSIZE_Y = 400);
+
+    
+    /** Create an SPI display interface
+    * @param displayproto SPI_8 or SPI_16
+    * @param Hz SPI speed in Hz
+    * @param mosi SPI pin
+    * @param miso SPI pin
+    * @param sclk SPI pin
+    * @param CS pin connected to CS of display
+    * @param reset pin connected to RESET of display
+    * @param DC pin connected to data/command of display
+    * @param name The name used by the parent class to access the interface
+    * @param LCDSIZE_X x size in pixel - optional
+    * @param LCDSIZE_Y y size in pixel - optional
+    */ 
+    S6D04D1(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char* name , unsigned int LCDSIZE_X = 240, unsigned  int LCDSIZE_Y = 400);
+    
+   // unsigned int status();
+  
+
+  
+protected:
+    
+    
+    /** Init command sequence  
+    */
+    void init();
+
+
+};
+#endif
\ No newline at end of file