Future Electronics
/
sequana-lorawan-lab2
This is an example LoRaWAN application for Future Electronic Sequana/LoRa training.
config/SX126X_example_config.json@60:4b5ab8ab1353, 2019-11-22 (annotated)
- Committer:
- lru
- Date:
- Fri Nov 22 10:35:47 2019 +0000
- Revision:
- 60:4b5ab8ab1353
- Parent:
- 57:36e87c44c920
Slowed ping messages to once per 30 seconds.
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
mbed_official | 57:36e87c44c920 | 1 | { |
mbed_official | 57:36e87c44c920 | 2 | "config": { |
mbed_official | 57:36e87c44c920 | 3 | "lora-radio": { |
mbed_official | 57:36e87c44c920 | 4 | "help": "Which radio to use (options: SX126X, SX1272, SX1276) -- See config/ dir for example configs", |
mbed_official | 57:36e87c44c920 | 5 | "value": "SX126X" |
mbed_official | 57:36e87c44c920 | 6 | }, |
mbed_official | 57:36e87c44c920 | 7 | "main_stack_size": { "value": 4096 }, |
mbed_official | 57:36e87c44c920 | 8 | |
mbed_official | 57:36e87c44c920 | 9 | "lora-spi-mosi": { "value": "NC" }, |
mbed_official | 57:36e87c44c920 | 10 | "lora-spi-miso": { "value": "NC" }, |
mbed_official | 57:36e87c44c920 | 11 | "lora-spi-sclk": { "value": "NC" }, |
mbed_official | 57:36e87c44c920 | 12 | "lora-cs": { "value": "NC" }, |
mbed_official | 57:36e87c44c920 | 13 | "lora-reset": { "value": "NC" }, |
mbed_official | 57:36e87c44c920 | 14 | "lora-dio1": { "value": "NC" }, |
mbed_official | 57:36e87c44c920 | 15 | "lora-busy": { "value": "NC" }, |
mbed_official | 57:36e87c44c920 | 16 | "lora-freq-sel": { "value": "NC" }, |
mbed_official | 57:36e87c44c920 | 17 | "lora-dev-sel": { "value": "NC" }, |
mbed_official | 57:36e87c44c920 | 18 | "lora-xtal-sel": { "value": "NC" }, |
mbed_official | 57:36e87c44c920 | 19 | "lora-ant-switch": { "value": "NC" } |
mbed_official | 57:36e87c44c920 | 20 | |
mbed_official | 57:36e87c44c920 | 21 | }, |
mbed_official | 57:36e87c44c920 | 22 | "target_overrides": { |
mbed_official | 57:36e87c44c920 | 23 | "*": { |
mbed_official | 57:36e87c44c920 | 24 | "platform.stdio-convert-newlines": true, |
mbed_official | 57:36e87c44c920 | 25 | "platform.stdio-baud-rate": 115200, |
mbed_official | 57:36e87c44c920 | 26 | "platform.default-serial-baud-rate": 115200, |
mbed_official | 57:36e87c44c920 | 27 | "lora.over-the-air-activation": true, |
mbed_official | 57:36e87c44c920 | 28 | "lora.duty-cycle-on": true, |
mbed_official | 57:36e87c44c920 | 29 | "lora.phy": "EU868", |
mbed_official | 57:36e87c44c920 | 30 | "lora.device-eui": "{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }", |
mbed_official | 57:36e87c44c920 | 31 | "lora.application-eui": "{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }", |
mbed_official | 57:36e87c44c920 | 32 | "lora.application-key": "{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }" |
mbed_official | 57:36e87c44c920 | 33 | }, |
mbed_official | 57:36e87c44c920 | 34 | |
mbed_official | 57:36e87c44c920 | 35 | "NUCLEO_L073RZ": { |
mbed_official | 57:36e87c44c920 | 36 | "main_stack_size": 2048, |
mbed_official | 57:36e87c44c920 | 37 | "lora-spi-mosi": "D11", |
mbed_official | 57:36e87c44c920 | 38 | "lora-spi-miso": "D12", |
mbed_official | 57:36e87c44c920 | 39 | "lora-spi-sclk": "D13", |
mbed_official | 57:36e87c44c920 | 40 | "lora-cs": "D7", |
mbed_official | 57:36e87c44c920 | 41 | "lora-reset": "A0", |
mbed_official | 57:36e87c44c920 | 42 | "lora-dio1": "D5", |
mbed_official | 57:36e87c44c920 | 43 | "lora-busy": "D3", |
mbed_official | 57:36e87c44c920 | 44 | "lora-freq-sel": "A1", |
mbed_official | 57:36e87c44c920 | 45 | "lora-dev-sel": "A2", |
mbed_official | 57:36e87c44c920 | 46 | "lora-xtal-sel": "A3", |
mbed_official | 57:36e87c44c920 | 47 | "lora-ant-switch": "D8" |
mbed_official | 57:36e87c44c920 | 48 | }, |
mbed_official | 57:36e87c44c920 | 49 | |
mbed_official | 57:36e87c44c920 | 50 | "K64F": { |
mbed_official | 57:36e87c44c920 | 51 | "lora-spi-mosi": "D11", |
mbed_official | 57:36e87c44c920 | 52 | "lora-spi-miso": "D12", |
mbed_official | 57:36e87c44c920 | 53 | "lora-spi-sclk": "D13", |
mbed_official | 57:36e87c44c920 | 54 | "lora-cs": "D7", |
mbed_official | 57:36e87c44c920 | 55 | "lora-reset": "A0", |
mbed_official | 57:36e87c44c920 | 56 | "lora-dio1": "D5", |
mbed_official | 57:36e87c44c920 | 57 | "lora-busy": "D3", |
mbed_official | 57:36e87c44c920 | 58 | "lora-freq-sel": "A1", |
mbed_official | 57:36e87c44c920 | 59 | "lora-dev-sel": "A2", |
mbed_official | 57:36e87c44c920 | 60 | "lora-xtal-sel": "A3", |
mbed_official | 57:36e87c44c920 | 61 | "lora-ant-switch": "D8" |
mbed_official | 57:36e87c44c920 | 62 | } |
mbed_official | 57:36e87c44c920 | 63 | }, |
mbed_official | 57:36e87c44c920 | 64 | "macros": ["MBEDTLS_USER_CONFIG_FILE=\"mbedtls_lora_config.h\""] |
mbed_official | 57:36e87c44c920 | 65 | } |