WELCOME TO THE K2 MOUNTAIN CHALLENGE WIKI PAGE¶

The K2 Mountain Challenge consists of two parts. The first part is to download the K2 Mountain Challenge application for your FRDM-K64F give-away board. The second is to plug your give-away board into the K2 Mountain and find out if you're a winner. Follow these instructions to participate in the K2 Mountain Challenge:

Downloading Your FRDM-K64F K2 Mountain Challenge Application¶

1. Download the FRDM-K64F binary developed for the K2 Challenge. ftf_oobe.bin
2. Open the folder that contains your binary and copy the binary.
3. Connect your FRDM-K64F to the PC via the USB A to micro B cable (the micro B connection should be connected to the OpenSDA connector, J26).
4. Once your FRDM-K64F MSD enumerates, open the drive.
5. Paste the binary that you previously copied into the FRDM-K64F drive. Once the file is fully copied, the RGB LED should be cycling through the LED colors.

If you are performing these instructions from a K2 Challenge pedestal, please unplug your FRDM-K64 and delete the binary that you have downloaded.

Climbing the K2 Mountain¶

1. After successfully downloading the application to the FRDM-K64F give-away board, take your board to the K2 Mountain and plug in the USB cable at the base of the mountain to the K64 micro USB connector (J22).
2. Once the LED cycling sequence begins, press SW3 (located next to the tri-color LED).
3. The LEDs should now be off and the K2 Mountain should recognize your request to participate.