FRA221_2016
LCD & RFID
Fork of
RFID-RC522
by 
Thomas Kirchner
Revision 3:b2001deb442c, committed 2016-12-07
- Comitter:
- sivanon1996
- Date:
- Wed Dec 07 04:02:29 2016 +0000
- Parent:
- 2:a0c7513fb634
- Commit message:
- P12
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TextLCD.lib Wed Dec 07 04:02:29 2016 +0000 @@ -0,0 +1,1 @@ +http://developer.mbed.org/users/simon/code/TextLCD/#308d188a2d3a
--- a/main.cpp Fri Jun 06 03:04:48 2014 +0000
+++ b/main.cpp Wed Dec 07 04:02:29 2016 +0000
@@ -1,67 +1,320 @@
-//Test of cheap 13.56 Mhz RFID-RC522 module from eBay
-//This code is based on Martin Olejar's MFRC522 library. Minimal changes
-//Adapted for Nucleo STM32 F401RE. Should work on other Nucleos too
-
-//Connect as follows:
-//RFID pins -> Nucleo header CN5 (Arduino-compatible header)
-//----------------------------------------
-//RFID IRQ=pin5 -> Not used. Leave open
-//RFID MISO=pin4 -> Nucleo SPI_MISO=PA_6=D12
-//RFID MOSI=pin3 -> Nucleo SPI_MOSI=PA_7=D11
-//RFID SCK=pin2 -> Nucleo SPI_SCK =PA_5=D13
-//RFID SDA=pin1 -> Nucleo SPI_CS =PB_6=D10
-//RFID RST=pin7 -> Nucleo =PA_9=D8
-//3.3V and Gnd to the respective pins
-
#include "mbed.h"
#include "MFRC522.h"
-
-// Nucleo Pin for MFRC522 reset (pick another D pin if you need D8)
+#include "TextLCD.h"
+#include "string.h"
#define MF_RESET D8
-
+Serial blue(PC_6, D9);
+DigitalOut aaa(D15);
+DigitalOut myled(LED1);
+AnalogIn x(A0);
+AnalogIn y(A1);
+AnalogIn z(A2);
DigitalOut LedGreen(LED1);
+Serial pc(SERIAL_TX, SERIAL_RX);
+MFRC522 RfChip (SPI_MOSI, SPI_MISO, SPI_SCK, SPI_CS, MF_RESET);
+TextLCD lcd(D2, D3, D4, D5, D6, D7, TextLCD::LCD20x4); // rs, e, d4-d7
-//Serial connection to PC for output
-Serial pc(SERIAL_TX, SERIAL_RX);
+int card_check = 0;
+int i = 0;
+int H = 0;
+float L = 50;
+int card_type = 0;
+int arrow = 0;
+int a,b,c = 0;
+char charID[4];
+char indoor[4] = {'O','F','F'};
+char ON[4] = {'O','N','\0'};
+char OFF[4] = {'O','F','F'};
+char HC[4] = {'\0'};
+char LC[4] = {'\0'};
+int timming = 0;
-MFRC522 RfChip (SPI_MOSI, SPI_MISO, SPI_SCK, SPI_CS, MF_RESET);
+void rfid_check()
+{
+
+ RfChip.PCD_Init();
+
+ while (card_type == 0) {
+
-int main(void) {
- pc.printf("starting...\n");
+ if ( ! RfChip.PICC_IsNewCardPresent()) {
+ wait_ms(500);
+ continue;
+ }
- // Init. RC522 Chip
- RfChip.PCD_Init();
+ if ( ! RfChip.PICC_ReadCardSerial()) {
+ wait_ms(500);
+ continue;
+ }
- while (true) {
- LedGreen = 1;
+ for (uint8_t i = RfChip.uid.size; i >= 1; i--) {
+ sprintf(charID, "%X02", RfChip.uid.uidByte[i]);
+ }
+ pc.printf("\n-%s-\n",charID);
+ if (strcmp(charID,"BF02") == 0) {
+ lcd.locate(3,2);
+ lcd.printf("Hello Master!!");
+ card_type = 1;
+ blue.printf("i");
+ }
- // Look for new cards
- if ( ! RfChip.PICC_IsNewCardPresent())
- {
- wait_ms(500);
- continue;
+ else if (strcmp(charID,"5D02") == 0) {
+ lcd.locate(2,2);
+ lcd.printf("Hello Light Man!");
+ card_type = 3;
+ blue.printf("i");
+ }
+
+ else if (strcmp(charID,"9B02") == 0) {
+ lcd.locate(2,2);
+ lcd.printf("Hello Pump Man!!");
+ card_type = 2;
+ blue.printf("i");
+
+ } else /*if (strcmp(charID,"2E02") == 0)*/ {
+ card_type = 4;
+ }
}
- // Select one of the cards
- if ( ! RfChip.PICC_ReadCardSerial())
- {
- wait_ms(500);
- continue;
+}
+
+void menu()
+{
+ blue.printf("a");
+ pc.printf("a sended\n");
+ for (i = 0; i <= 3 ; i++) {
+ HC[i] = blue.getc();
+ }
+ pc.printf("a got\n");
+ blue.printf("b");
+ pc.printf("b sended\n");
+ for (i = 0; i <= 3 ; i++) {
+ LC[i] = blue.getc();
}
+ pc.printf("b got\n");
+ lcd.printf(" HUMIDITY = %.*s\n",4,HC);
+ lcd.printf(" LIGHT = %.*s\n",4,LC);
+ lcd.printf(" LOG OUT\n\n");
+ pc.printf("LCD SETING DONE\n");
+}
- LedGreen = 0;
+void bb()
+{
+ while (true) {
+ if (x == 1) {
+ a=1;
+ while (x >= 0.7) {};
+ break;
+ }
+ if (y == 1) {
+ b=1;
+ while (y >= 0.7) {};
+ break;
+ }
+ if (z == 1) {
+ c=1;
+ while (z >= 0.7) {};
+ break;
+ }
+ }
+}
+
+void menu_light()
+{
+ lcd.cls();
+ lcd.printf(" ~~LIGHT~~\n");
+ lcd.printf(" INDOOR = %.0f %%\n",L);
+ lcd.printf(" OUTDOOR = %s\n",indoor);
+ lcd.printf(" BACK\n");
+}
- // Print Card UID
- pc.printf("Card UID: ");
- for (uint8_t i = 0; i < RfChip.uid.size; i++)
- {
- pc.printf(" %X02", RfChip.uid.uidByte[i]);
+int main()
+{
+ while (true) {
+ for(i=0; i<4; i++) {
+ charID[i]='\0';
+ }
+ timming = 0;
+ card_type = 0;
+ arrow = 1;
+ lcd.cls();
+ lcd.printf("\n ^O^ \n\n");
+ rfid_check();
+ if (card_type == 4) {
+ lcd.locate(5,2);
+ lcd.printf("WHO ARE U ??");
+ timming = 1;
+ aaa = 1;
+ wait_ms(2000);
+ aaa = 0;
+ }
+ wait_ms(2000);
+ while (timming == 0) {
+ if (arrow == 1) {
+ lcd.cls();
+ menu();
+ lcd.printf("->");
+ bb();
+ if (c == 1) {
+ arrow = 2;
+ c = 0;
+ }
+ if (b == 1) {
+ if(card_type == 2 || card_type == 1) {
+ arrow = 4;
+ }
+ b = 0;
+ }
+ }
+ if (arrow == 2) {
+ lcd.cls();
+ menu();
+ lcd.locate(0,1);
+ lcd.printf("->");
+ bb();
+ if (a == 1) {
+ arrow = 1;
+ a = 0;
+ }
+ if (c == 1) {
+ arrow = 3;
+ c = 0;
+ }
+ if (b == 1) {
+ if(card_type == 3 || card_type == 1) {
+ arrow = 5;
+ }
+ b = 0;
+ }
+ }
+ if (arrow == 3) {
+ lcd.cls();
+ menu();
+ lcd.locate(0,2);
+ lcd.printf("->");
+ bb();
+ if (a == 1) {
+ arrow = 2;
+ a = 0;
+ }
+ if (b == 1) {
+ b = 0;
+ blue.printf("o");
+ timming = 1;
+ }
+ }
+ if (arrow == 4) {
+ lcd.cls();
+ lcd.printf(" ~~HUMIDITY~~\n");
+ if (H == 0) {
+ lcd.printf(" %s",OFF);
+ }
+ if (H == 1) {
+ lcd.printf(" %s",ON);
+ }
+ bb();
+ if (a == 1) {
+ H = 1;
+ blue.printf("7");
+ a = 0;
+ }
+ if (c == 1) {
+ H = 0;
+ blue.printf("4");
+ c = 0;
+ }
+ if (b == 1) {
+ arrow = 1;
+ b = 0;
+ }
+ }
+ if (arrow == 5) {
+ menu_light();
+ lcd.locate(0,1);
+ lcd.printf("->");
+ bb();
+ if (c == 1) {
+ arrow = 6;
+ c = 0;
+ }
+ if (b == 1) {
+ arrow = 51;
+ b = 0;
+ }
+ }
+ if (arrow == 6) {
+ menu_light();
+ lcd.locate(0,2);
+ lcd.printf("->");
+ bb();
+ if (a == 1) {
+ arrow = 5;
+ a = 0;
+ }
+ if (b == 1) {
+ arrow = 52;
+ b = 0;
+ }
+ if (c == 1) {
+ arrow = 7;
+ c = 0;
+ }
+ }
+ if (arrow == 7) {
+ menu_light();
+ lcd.locate(0,3);
+ lcd.printf("->");
+ bb();
+ if (a == 1) {
+ arrow = 6;
+ a = 0;
+ }
+ if (b == 1) {
+ arrow = 2;
+ b = 0;
+ }
+ }
+ if (arrow == 51) {
+ lcd.cls();
+ lcd.printf(" ~~INDOOR LIGHT~~\n");
+ lcd.printf(" %.0f %%\n\n\n",L);
+ bb();
+ if (a ==1 ) {
+ L = L + 5;
+ blue.printf("8");
+ a = 0;
+ }
+ if (c == 1 ) {
+ L = L - 5;
+ blue.printf("5");
+ c = 0;
+ }
+ if (b == 1 ) {
+ arrow = 5;
+ b = 0;
+ }
+ }
+ if (arrow == 52) {
+ lcd.cls();
+ lcd.printf(" ~~OUTDOOR LIGHT~~\n");
+ lcd.printf(" %s\n\n\n",indoor);
+ bb();
+ if (a ==1 ) {
+ strcpy(indoor,ON);
+ blue.printf("9");
+ a = 0;
+ }
+ if (c == 1 ) {
+ strcpy(indoor,OFF);
+ blue.printf("6");
+ c = 0;
+ }
+ if (b == 1 ) {
+ arrow = 6;
+ b = 0;
+ }
+ }
+ }
+ blue.printf("o");
}
- pc.printf("\n\r");
-
- // Print Card type
- uint8_t piccType = RfChip.PICC_GetType(RfChip.uid.sak);
- pc.printf("PICC Type: %s \n\r", RfChip.PICC_GetTypeName(piccType));
- wait_ms(1000);
- }
}
\ No newline at end of file
--- a/mbed.bld Fri Jun 06 03:04:48 2014 +0000 +++ b/mbed.bld Wed Dec 07 04:02:29 2016 +0000 @@ -1,1 +1,1 @@ -http://mbed.org/users/mbed_official/code/mbed/builds/0b3ab51c8877 \ No newline at end of file +http://mbed.org/users/mbed_official/code/mbed/builds/d75b3fe1f5cb \ No newline at end of file