Embedded Artists
Example using the support package for LPC4088 DisplayModule
Dependencies: DMBasicGUI DMSupport
Example using a lot of the features in the software package for the LPC4088 Display Module.
This project can be selected as a template when creating a new project based on the LPC4088 Display Module.
Information
This project works on the 4.3" display modules.
Some of the apps works on the 5" display modules. The ImageViewer and Slideshow app will show the images distorted as it does not take the resolution into consideration.
Information
The USB Status app is disabled. The Image viewer looks for images in the root of SD cards, USB memory sticks or the file system on the QSPI flash. The Slideshow app expects to find a slideshow script in /mci/elec14/ea_logo.txt.
This is what it looks like on the 4.3" display:
dm_board_config.h
- Committer:
- alindvall
- Date:
- 2015-03-20
- Revision:
- 27:4fe24decabf9
- Parent:
- 26:f07df116f3c9
- Child:
- 30:e1cded731965
File content as of revision 27:4fe24decabf9:
/*
* Copyright 2014 Embedded Artists AB
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef DM_BOARD_CONFIG_H
#define DM_BOARD_CONFIG_H
// Template to use for the project-specific settings. Copy this file to your project,
// rename it to dm_board_config.h and uncomment the wanted features below:
// #define DM_BOARD_USE_USB_DEVICE
#define DM_BOARD_USE_USB_HOST
#define DM_BOARD_USE_MCI_FS
#define DM_BOARD_USE_QSPI_FS
// #define DM_BOARD_USE_QSPI
#define DM_BOARD_USE_DISPLAY
#define DM_BOARD_USE_TOUCH
// #define DM_BOARD_USE_ETHERNET
#define DM_BOARD_USE_FAST_UART
// #define DM_BOARD_USE_USBSERIAL_IN_RTOSLOG
// #define DM_BOARD_DISABLE_STANDARD_PRINTF
// #define DM_BOARD_ENABLE_MEASSURING_PINS
#define DM_BOARD_USE_REGISTRY
#endif