DigiMesh Modem Status example for mbed XBeeLib By Digi

Dependencies:   XBeeLib mbed

Fork of XBeeZB_modem_status by Digi International Inc.

Description

This example shows how to register a function callback to be aware of modem status changes. This library will call the registered callback whenever the XBee module radio modem changes its status

See Handling modem status changes chapter for more information.

Common Setup

Make sure you have a valid Example Common Setup

Example Setup

This example does not require any additional setup.

Running the example

Build and deploy the example to the mbed module.
Reset the mbed module so the example starts. You should see the example debug information through the debug interface configured in the 'Local Setup' chapter.

It you set up a network as described in the Common Setup section, you should see following modem status in the debug interface:

  • Modem Status 0x0: Corresponds to 'HwReset' meaning 'Hardware reset'

History

Automatic upload default tip

2016-07-29, by hbujanda [Fri, 29 Jul 2016 12:15:30 +0200] rev 10

Automatic upload


Initial commit

2016-07-28, by hbujanda [Thu, 28 Jul 2016 10:22:18 +0000] rev 9

Initial commit


Automatic upload

2016-07-28, by hbujanda [Thu, 28 Jul 2016 10:20:06 +0200] rev 8

Automatic upload


Automatic upload

2016-03-31, by hbujanda [Thu, 31 Mar 2016 11:41:40 +0200] rev 7

Automatic upload


Automatic upload

2015-06-01, by spastor [Mon, 01 Jun 2015 19:01:51 +0200] rev 6

Automatic upload


Automatic upload

2015-05-18, by spastor [Mon, 18 May 2015 13:19:23 +0200] rev 5

Automatic upload


Automatic upload

2015-05-14, by hbujanda [Thu, 14 May 2015 16:24:34 +0200] rev 4

Automatic upload


Automatic upload

2015-05-14, by hbujanda [Thu, 14 May 2015 16:08:20 +0200] rev 3

Automatic upload


Automatic upload

2015-05-11, by hbujanda [Mon, 11 May 2015 18:00:40 +0200] rev 2

Automatic upload


Automatic upload

2015-05-08, by spastor [Fri, 08 May 2015 11:53:26 +0200] rev 1

Automatic upload