Digi International Inc. / Mbed 2 deprecated XBeeDM_AT_Commands

DigiMesh AT Commands example for mbed XBeeLib By Digi

Dependencies:   XBeeLib mbed

Fork of XBeeZB_AT_Commands by Digi International Inc.

This example shows how to read and change configuration parameters of either the local XBee module or a remote XBee module.

See Configuring local and remote modules chapter for more information.

Common Setup

Make sure you have a valid Example Common Setup

Example Setup

Application

You have to configure the remote device 64-bit address by customizing the REMOTE_NODE_ADDR64_MSB and REMOTE_NODE_ADDR64_LSB defines with the remote XBee module 64-bit address.

Running the example

Build and deploy the example to the mbed module.
Reset the mbed module so the example starts. You should see the example debug information through the debug interface configured in the 'Local Setup' chapter.
The application will do following operations:

OperationXBee moduleparameterVerification
ReadlocalSLThe result is asserted against the known local module SL value. So just check the assertion passed
SetlocalNIClick 'discover remote devices' on the X-CTU connected to the remote. Should discover the local XBee module with the new NI (ni_example_local)
ReadremoteSLThe result is asserted against the known remote module SL value. So just check the assertion passed
SetremoteNIRefresh the 'NI' parameter in the X-CTU connected to the remote and check it has changed to the new NI (ni_example_remote)

Files at this revision

API Documentation at this revision

Revision 11:a5697b787955, committed 2016-07-29

Comitter:
hbujanda
Date:
Fri Jul 29 12:14:19 2016 +0200
Parent:
10:8e6997fed0fe
Commit message:
Automatic upload

Changed in this revision

XBeeLib.lib Show annotated file Show diff for this revision Revisions of this file
main.cpp Show annotated file Show diff for this revision Revisions of this file
mbed.bld Show annotated file Show diff for this revision Revisions of this file 
diff -r 8e6997fed0fe -r a5697b787955 XBeeLib.lib
--- a/XBeeLib.lib	Thu Jul 28 10:26:22 2016 +0000
+++ b/XBeeLib.lib	Fri Jul 29 12:14:19 2016 +0200
@@ -1,1 +1,1 @@
-http://developer.mbed.org/teams/Digi-International-Inc/code/XBeeLib/#06522f3a6642
+http://developer.mbed.org/teams/Digi-International-Inc/code/XBeeLib/#b5f4a0e92249

diff -r 8e6997fed0fe -r a5697b787955 main.cpp
--- a/main.cpp	Thu Jul 28 10:26:22 2016 +0000
+++ b/main.cpp	Fri Jul 29 12:14:19 2016 +0200
@@ -19,10 +19,8 @@
 
 #define REMOTE_NODE_ADDR64_MSB  ((uint32_t)0x0013A200)
 
-//#error "Replace next define with the LSB of the remote module's 64-bit address (SL parameter)"
-//#define REMOTE_NODE_ADDR64_LSB  ((uint32_t)0x01234567)
-#define REMOTE_NODE_ADDR64_LSB  ((uint32_t)0x40E465E0)
-
+#error "Replace next define with the LSB of the remote module's 64-bit address (SL parameter)"
+#define REMOTE_NODE_ADDR64_LSB  ((uint32_t)0x01234567)
 
 #define REMOTE_NODE_ADDR64      UINT64(REMOTE_NODE_ADDR64_MSB, REMOTE_NODE_ADDR64_LSB)
 

diff -r 8e6997fed0fe -r a5697b787955 mbed.bld
--- a/mbed.bld	Thu Jul 28 10:26:22 2016 +0000
+++ b/mbed.bld	Fri Jul 29 12:14:19 2016 +0200
@@ -1,1 +1,1 @@
-http://mbed.org/users/mbed_official/code/mbed/builds/f9eeca106725
\ No newline at end of file
+http://mbed.org/users/mbed_official/code/mbed/builds/487b796308b0
\ No newline at end of file