Diff: btle/src/btle.cpp

Revision:

0:309c845d289d

Child:

2:a2b623661316

diff -r 000000000000 -r 309c845d289d btle/src/btle.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/btle/src/btle.cpp	Wed Jul 16 04:59:51 2014 +0000
@@ -0,0 +1,169 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+
+#include "btle.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* C File Includes ------------------------------------------------------------------*/
+#include "hal_types.h"
+#include "hci.h"
+#include "bluenrg_hci.h"
+#include "gp_timer.h"
+#include "hal.h"
+#include "osal.h"
+#include "hci_internal.h"
+#include "bluenrg_hci_internal.h"
+#include "gap.h"
+#include "sm.h"
+#include <stdio.h>
+#include <string.h>
+#include <stm32l0xx_bluenrg_shield_bsp.h>
+//#include "sensor_service.h"
+#include "role_type.h"
+#include "debug.h"
+
+/* SPI handler declaration */
+SPI_HandleTypeDef SpiHandle;
+
+#ifdef __cplusplus
+    }
+#endif
+
+
+static void btle_handler(/*ble_evt_t * p_ble_evt*/);
+void HCI_Input(tHciDataPacket * hciReadPacket);
+
+#define BDADDR_SIZE 6
+tHalUint8 bdaddr[BDADDR_SIZE]= {0xaa, 0x00, 0x00, 0xE1, 0x80, 0x02};
+
+/* Private variables ---------------------------------------------------------*/
+volatile uint8_t set_connectable = 1;
+
+/**************************************************************************/
+/*!
+    @brief      Initialises BTLE and the underlying HW/SoftDevice
+
+    @returns
+*/
+/**************************************************************************/
+void btle_init(void)
+{
+  const char *name = "BlueNRG";
+  tHalUint8 SERVER_BDADDR[] = {0x12, 0x34, 0x00, 0xE1, 0x80, 0x02};//MPD: This is the public address of the Server/Client
+  tHalUint8 bdaddr[BDADDR_SIZE];
+  int ret;
+  uint16_t service_handle, dev_name_char_handle, appearance_char_handle;
+  
+  HAL_Init();
+  
+  /* Configure LED2 */
+  //BSP_LED_Init(LED2);
+  
+  /* Configure the User Button in GPIO Mode */
+  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);
+  
+  /* Configure the system clock */
+  SystemClock_Config();
+
+  /* Delay needed only to be able to acces the JTAG interface after reset
+    if it will be disabled later. */
+  Clock_Wait(500);
+  
+  /* Initialize the BlueNRG SPI driver */
+  BNRG_SPI_Init();
+  
+  /* Initialize the BlueNRG HCI */
+  HCI_Init();
+  
+  /* Reset BlueNRG SPI interface */
+  BlueNRG_RST();
+
+  //BSP_LED_Toggle(LED2);
+
+  /* The Nucleo board must be configured as SERVER */
+  Osal_MemCpy(bdaddr, SERVER_BDADDR, sizeof(SERVER_BDADDR));
+  
+  ret = aci_hal_write_config_data(CONFIG_DATA_PUBADDR_OFFSET,
+                                  CONFIG_DATA_PUBADDR_LEN,
+                                  bdaddr);
+                                  
+  ret = aci_gatt_init();
+
+  ret = aci_gap_init(GAP_PERIPHERAL_ROLE, &service_handle, &dev_name_char_handle, &appearance_char_handle);
+
+  ret = aci_gatt_update_char_value(service_handle, dev_name_char_handle, 0,
+                               strlen(name), (tHalUint8 *)name);
+                               
+  return;
+}
+
+void User_Process()
+{
+  if(set_connectable){
+    setConnectable();
+    set_connectable = FALSE;
+  }
+}
+
+void setConnectable(void)
+{  
+  tBleStatus ret;
+  
+  const char local_name[] = {AD_TYPE_COMPLETE_LOCAL_NAME,'B','l','u','e','N','R','G'};
+  
+  /* disable scan response */
+  hci_le_set_scan_resp_data(0,NULL);
+  
+  
+  ret = aci_gap_set_discoverable(ADV_IND, 0, 0, PUBLIC_ADDR, NO_WHITE_LIST_USE,
+                                 8, local_name, 0, NULL, 0, 0);
+  
+}
+
+/**************************************************************************/
+/*!
+    @brief
+
+    @param[in]  p_ble_evt
+    
+    @returns
+*/
+/**************************************************************************/
+static void btle_handler(/*ble_evt_t * p_ble_evt*/)
+{
+  
+}
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+extern void HCI_Event_CB(void *ptr) {
+    int a=3;
+    int b=5;
+    
+    int sum = a+b;
+    
+    return ;
+    }
+#ifdef __cplusplus
+    }
+#endif
\ No newline at end of file