HW layer for the Nucleo board, it only work with old BLE_API

Dependents:   Hello_BLE F446RE-BLE

Fork of X_NUCLEO_IDB0XA1 by ST

utils/inc/Utils.h

Committer:
mridup
Date:
2014-09-15
Revision:
50:898acb5227fc
Parent:
46:01f97cfcc109
Child:
58:027c65a54097

File content as of revision 50:898acb5227fc:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
 
 #include "hal_types.h"
 #include "mbed.h"
 
 // utility functions
 
#ifndef __UTIL_H__
#define __UTIL_H__

#define NEED_CONSOLE_OUTPUT 1 /* Set this if you need debug messages on the console;
                               * it will have an impact on code-size and power consumption. */
 
#if NEED_CONSOLE_OUTPUT
//Serial usb(USBTX, USBRX); // tx, rx
extern Serial  pc;
#define DEBUG(...) { pc.printf(__VA_ARGS__); }
#else
#define DEBUG(...) /* nothing */
#endif /* #if NEED_CONSOLE_OUTPUT */

#define STORE_LE_16(buf, val)    ( ((buf)[0] =  (tHalUint8) (val)    ) , \
                                   ((buf)[1] =  (tHalUint8) (val>>8) ) )

#define STORE_LE_32(buf, val)    ( ((buf)[0] =  (tHalUint8) (val)     ) , \
                                   ((buf)[1] =  (tHalUint8) (val>>8)  ) , \
                                   ((buf)[2] =  (tHalUint8) (val>>16) ) , \
                                   ((buf)[3] =  (tHalUint8) (val>>24) ) ) 
                                   
#define COPY_UUID_128(uuid_struct, uuid_15, uuid_14, uuid_13, uuid_12, uuid_11, uuid_10, uuid_9, uuid_8, uuid_7, uuid_6, uuid_5, uuid_4, uuid_3, uuid_2, uuid_1, uuid_0) \
do {\
    uuid_struct[0] = uuid_0; uuid_struct[1] = uuid_1; uuid_struct[2] = uuid_2; uuid_struct[3] = uuid_3; \
        uuid_struct[4] = uuid_4; uuid_struct[5] = uuid_5; uuid_struct[6] = uuid_6; uuid_struct[7] = uuid_7; \
            uuid_struct[8] = uuid_8; uuid_struct[9] = uuid_9; uuid_struct[10] = uuid_10; uuid_struct[11] = uuid_11; \
                uuid_struct[12] = uuid_12; uuid_struct[13] = uuid_13; uuid_struct[14] = uuid_14; uuid_struct[15] = uuid_15; \
}while(0)
 
                                   
double getHighPowerAndPALevelValue(int8_t dBMLevel, int8_t& EN_HIGH_POWER, int8_t& PA_LEVEL);

#endif // __UTIL_H__