HW layer for the Nucleo board, it only work with old BLE_API
Dependents: Hello_BLE F446RE-BLE
Fork of X_NUCLEO_IDB0XA1 by
utils/inc/Utils.h
- Committer:
- Wolfgang Betz
- Date:
- 2015-07-27
- Revision:
- 103:12684d94c3a6
- Parent:
- 102:a6f233cb1fed
- Child:
- 105:332f93cd06b7
File content as of revision 103:12684d94c3a6:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ // utility functions #ifndef __UTIL_H__ #define __UTIL_H__ #include "hal_types.h" #include "mbed.h" #define NEED_CONSOLE_OUTPUT 1 /* Set this if you need debug messages on the console; */ /*it will have an impact on code-size and power consumption. */ #if NEED_CONSOLE_OUTPUT //Serial usb(USBTX, USBRX); // tx, rx extern Serial pc; #define DEBUG(...) { pc.printf(__VA_ARGS__); } #else #define DEBUG(...) /* nothing */ #endif /* #if NEED_CONSOLE_OUTPUT */ #define STORE_LE_16(buf, val) ( ((buf)[0] = (uint8_t) (val) ) , \ ((buf)[1] = (uint8_t) (val>>8) ) ) #define STORE_LE_32(buf, val) ( ((buf)[0] = (uint8_t) (val) ) , \ ((buf)[1] = (uint8_t) (val>>8) ) , \ ((buf)[2] = (uint8_t) (val>>16) ) , \ ((buf)[3] = (uint8_t) (val>>24) ) ) #define COPY_UUID_128(uuid_struct, uuid_15, uuid_14, uuid_13, uuid_12, uuid_11, uuid_10, uuid_9, uuid_8, uuid_7, uuid_6, uuid_5, uuid_4, uuid_3, uuid_2, uuid_1, uuid_0) \ do {\ uuid_struct[0] = uuid_0; uuid_struct[1] = uuid_1; uuid_struct[2] = uuid_2; uuid_struct[3] = uuid_3; \ uuid_struct[4] = uuid_4; uuid_struct[5] = uuid_5; uuid_struct[6] = uuid_6; uuid_struct[7] = uuid_7; \ uuid_struct[8] = uuid_8; uuid_struct[9] = uuid_9; uuid_struct[10] = uuid_10; uuid_struct[11] = uuid_11; \ uuid_struct[12] = uuid_12; uuid_struct[13] = uuid_13; uuid_struct[14] = uuid_14; uuid_struct[15] = uuid_15; \ }while(0) double getHighPowerAndPALevelValue(int8_t dBMLevel, int8_t& EN_HIGH_POWER, int8_t& PA_LEVEL); #endif // __UTIL_H__