Mouse code for the MacroRat
mbed-dev/targets/TARGET_STM/TARGET_STM32F4/device/stm32f4xx_hal_spi.h
- Committer:
- sahilmgandhi
- Date:
- 2017-06-03
- Revision:
- 46:b156ef445742
- Parent:
- 18:6a4db94011d3
File content as of revision 46:b156ef445742:
/** ****************************************************************************** * @file stm32f4xx_hal_spi.h * @author MCD Application Team * @version V1.5.0 * @date 06-May-2016 * @brief Header file of SPI HAL module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_SPI_H #define __STM32F4xx_HAL_SPI_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal_def.h" /** @addtogroup STM32F4xx_HAL_Driver * @{ */ /** @addtogroup SPI * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup SPI_Exported_Types SPI Exported Types * @{ */ /** * @brief SPI Configuration Structure definition */ typedef struct { uint32_t Mode; /*!< Specifies the SPI operating mode. This parameter can be a value of @ref SPI_Mode */ uint32_t Direction; /*!< Specifies the SPI bidirectional mode state. This parameter can be a value of @ref SPI_Direction */ uint32_t DataSize; /*!< Specifies the SPI data size. This parameter can be a value of @ref SPI_Data_Size */ uint32_t CLKPolarity; /*!< Specifies the serial clock steady state. This parameter can be a value of @ref SPI_Clock_Polarity */ uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture. This parameter can be a value of @ref SPI_Clock_Phase */ uint32_t NSS; /*!< Specifies whether the NSS signal is managed by hardware (NSS pin) or by software using the SSI bit. This parameter can be a value of @ref SPI_Slave_Select_management */ uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be used to configure the transmit and receive SCK clock. This parameter can be a value of @ref SPI_BaudRate_Prescaler @note The communication clock is derived from the master clock. The slave clock does not need to be set. */ uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. This parameter can be a value of @ref SPI_MSB_LSB_transmission */ uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not. This parameter can be a value of @ref SPI_TI_mode */ uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not. This parameter can be a value of @ref SPI_CRC_Calculation */ uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. This parameter must be a number between Min_Data = 0 and Max_Data = 65535 */ }SPI_InitTypeDef; /** * @brief HAL SPI State structure definition */ typedef enum { HAL_SPI_STATE_RESET = 0x00U, /*!< Peripheral not Initialized */ HAL_SPI_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ HAL_SPI_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */ HAL_SPI_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */ HAL_SPI_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */ HAL_SPI_STATE_BUSY_TX_RX = 0x05U, /*!< Data Transmission and Reception process is ongoing */ HAL_SPI_STATE_ERROR = 0x06U /*!< SPI error state */ }HAL_SPI_StateTypeDef; /** * @brief SPI handle Structure definition */ typedef struct __SPI_HandleTypeDef { SPI_TypeDef *Instance; /* SPI registers base address */ SPI_InitTypeDef Init; /* SPI communication parameters */ uint8_t *pTxBuffPtr; /* Pointer to SPI Tx transfer Buffer */ uint16_t TxXferSize; /* SPI Tx Transfer size */ __IO uint16_t TxXferCount; /* SPI Tx Transfer Counter */ uint8_t *pRxBuffPtr; /* Pointer to SPI Rx transfer Buffer */ uint16_t RxXferSize; /* SPI Rx Transfer size */ __IO uint16_t RxXferCount; /* SPI Rx Transfer Counter */ void (*RxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Rx ISR */ void (*TxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Tx ISR */ DMA_HandleTypeDef *hdmatx; /* SPI Tx DMA Handle parameters */ DMA_HandleTypeDef *hdmarx; /* SPI Rx DMA Handle parameters */ HAL_LockTypeDef Lock; /* Locking object */ __IO HAL_SPI_StateTypeDef State; /* SPI communication state */ __IO uint32_t ErrorCode; /* SPI Error code */ }SPI_HandleTypeDef; /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup SPI_Exported_Constants SPI Exported Constants * @{ */ /** @defgroup SPI_Error_Code SPI Error Code * @{ */ #define HAL_SPI_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ #define HAL_SPI_ERROR_MODF ((uint32_t)0x00000001U) /*!< MODF error */ #define HAL_SPI_ERROR_CRC ((uint32_t)0x00000002U) /*!< CRC error */ #define HAL_SPI_ERROR_OVR ((uint32_t)0x00000004U) /*!< OVR error */ #define HAL_SPI_ERROR_FRE ((uint32_t)0x00000008U) /*!< FRE error */ #define HAL_SPI_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */ #define HAL_SPI_ERROR_FLAG ((uint32_t)0x00000020U) /*!< Flag: RXNE,TXE, BSY */ /** * @} */ /** @defgroup SPI_Mode SPI Mode * @{ */ #define SPI_MODE_SLAVE ((uint32_t)0x00000000U) #define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI) /** * @} */ /** @defgroup SPI_Direction SPI Direction Mode * @{ */ #define SPI_DIRECTION_2LINES ((uint32_t)0x00000000U) #define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY #define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE /** * @} */ /** @defgroup SPI_Data_Size SPI Data Size * @{ */ #define SPI_DATASIZE_8BIT ((uint32_t)0x00000000U) #define SPI_DATASIZE_16BIT SPI_CR1_DFF /** * @} */ /** @defgroup SPI_Clock_Polarity SPI Clock Polarity * @{ */ #define SPI_POLARITY_LOW ((uint32_t)0x00000000U) #define SPI_POLARITY_HIGH SPI_CR1_CPOL /** * @} */ /** @defgroup SPI_Clock_Phase SPI Clock Phase * @{ */ #define SPI_PHASE_1EDGE ((uint32_t)0x00000000U) #define SPI_PHASE_2EDGE SPI_CR1_CPHA /** * @} */ /** @defgroup SPI_Slave_Select_management SPI Slave Select Management * @{ */ #define SPI_NSS_SOFT SPI_CR1_SSM #define SPI_NSS_HARD_INPUT ((uint32_t)0x00000000U) #define SPI_NSS_HARD_OUTPUT ((uint32_t)0x00040000U) /** * @} */ /** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler * @{ */ #define SPI_BAUDRATEPRESCALER_2 ((uint32_t)0x00000000U) #define SPI_BAUDRATEPRESCALER_4 ((uint32_t)0x00000008U) #define SPI_BAUDRATEPRESCALER_8 ((uint32_t)0x00000010U) #define SPI_BAUDRATEPRESCALER_16 ((uint32_t)0x00000018U) #define SPI_BAUDRATEPRESCALER_32 ((uint32_t)0x00000020U) #define SPI_BAUDRATEPRESCALER_64 ((uint32_t)0x00000028U) #define SPI_BAUDRATEPRESCALER_128 ((uint32_t)0x00000030U) #define SPI_BAUDRATEPRESCALER_256 ((uint32_t)0x00000038U) /** * @} */ /** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB Transmission * @{ */ #define SPI_FIRSTBIT_MSB ((uint32_t)0x00000000U) #define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST /** * @} */ /** @defgroup SPI_TI_mode SPI TI Mode * @{ */ #define SPI_TIMODE_DISABLE ((uint32_t)0x00000000U) #define SPI_TIMODE_ENABLE SPI_CR2_FRF /** * @} */ /** @defgroup SPI_CRC_Calculation SPI CRC Calculation * @{ */ #define SPI_CRCCALCULATION_DISABLE ((uint32_t)0x00000000U) #define SPI_CRCCALCULATION_ENABLE SPI_CR1_CRCEN /** * @} */ /** @defgroup SPI_Interrupt_definition SPI Interrupt Definition * @{ */ #define SPI_IT_TXE SPI_CR2_TXEIE #define SPI_IT_RXNE SPI_CR2_RXNEIE #define SPI_IT_ERR SPI_CR2_ERRIE /** * @} */ /** @defgroup SPI_Flags_definition SPI Flags Definition * @{ */ #define SPI_FLAG_RXNE SPI_SR_RXNE /* SPI status flag: Rx buffer not empty flag */ #define SPI_FLAG_TXE SPI_SR_TXE /* SPI status flag: Tx buffer empty flag */ #define SPI_FLAG_BSY SPI_SR_BSY /* SPI status flag: Busy flag */ #define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */ #define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */ #define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */ #define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */ /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /** @defgroup SPI_Exported_Macros SPI Exported Macros * @{ */ /** @brief Reset SPI handle state. * @param __HANDLE__: specifies the SPI Handle. * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. * @retval None */ #define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET) /** @brief Enable or disable the specified SPI interrupts. * @param __HANDLE__: specifies the SPI Handle. * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. * @param __INTERRUPT__: specifies the interrupt source to enable or disable. * This parameter can be one of the following values: * @arg SPI_IT_TXE: Tx buffer empty interrupt enable * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable * @arg SPI_IT_ERR: Error interrupt enable * @retval None */ #define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__)) #define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__))) /** @brief Check whether the specified SPI interrupt source is enabled or not. * @param __HANDLE__: specifies the SPI Handle. * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. * @param __INTERRUPT__: specifies the SPI interrupt source to check. * This parameter can be one of the following values: * @arg SPI_IT_TXE: Tx buffer empty interrupt enable * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable * @arg SPI_IT_ERR: Error interrupt enable * @retval The new state of __IT__ (TRUE or FALSE). */ #define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) /** @brief Check whether the specified SPI flag is set or not. * @param __HANDLE__: specifies the SPI Handle. * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. * @param __FLAG__: specifies the flag to check. * This parameter can be one of the following values: * @arg SPI_FLAG_RXNE: Receive buffer not empty flag * @arg SPI_FLAG_TXE: Transmit buffer empty flag * @arg SPI_FLAG_CRCERR: CRC error flag * @arg SPI_FLAG_MODF: Mode fault flag * @arg SPI_FLAG_OVR: Overrun flag * @arg SPI_FLAG_BSY: Busy flag * @arg SPI_FLAG_FRE: Frame format error flag * @retval The new state of __FLAG__ (TRUE or FALSE). */ #define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) /** @brief Clear the SPI CRCERR pending flag. * @param __HANDLE__: specifies the SPI Handle. * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. * @retval None */ #define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR)) /** @brief Clear the SPI MODF pending flag. * @param __HANDLE__: specifies the SPI Handle. * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. * @retval None */ #define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) \ do{ \ __IO uint32_t tmpreg_modf = 0x00U; \ tmpreg_modf = (__HANDLE__)->Instance->SR; \ (__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE); \ UNUSED(tmpreg_modf); \ } while(0) /** @brief Clear the SPI OVR pending flag. * @param __HANDLE__: specifies the SPI Handle. * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. * @retval None */ #define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) \ do{ \ __IO uint32_t tmpreg_ovr = 0x00U; \ tmpreg_ovr = (__HANDLE__)->Instance->DR; \ tmpreg_ovr = (__HANDLE__)->Instance->SR; \ UNUSED(tmpreg_ovr); \ } while(0) /** @brief Clear the SPI FRE pending flag. * @param __HANDLE__: specifies the SPI Handle. * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. * @retval None */ #define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) \ do{ \ __IO uint32_t tmpreg_fre = 0x00U; \ tmpreg_fre = (__HANDLE__)->Instance->SR; \ UNUSED(tmpreg_fre); \ }while(0) /** @brief Enable the SPI peripheral. * @param __HANDLE__: specifies the SPI Handle. * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. * @retval None */ #define __HAL_SPI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_SPE) /** @brief Disable the SPI peripheral. * @param __HANDLE__: specifies the SPI Handle. * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. * @retval None */ #define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE)) /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @addtogroup SPI_Exported_Functions * @{ */ /** @addtogroup SPI_Exported_Functions_Group1 * @{ */ /* Initialization/de-initialization functions **********************************/ HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi); HAL_StatusTypeDef HAL_SPI_DeInit (SPI_HandleTypeDef *hspi); void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi); void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi); /** * @} */ /** @addtogroup SPI_Exported_Functions_Group2 * @{ */ /* I/O operation functions *****************************************************/ HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout); HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size); HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size); HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi); HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi); HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi); void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi); void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi); void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi); void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi); void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi); void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi); void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi); void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi); /** * @} */ /** @addtogroup SPI_Exported_Functions_Group3 * @{ */ /* Peripheral State and Error functions ***************************************/ HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi); uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi); /** * @} */ /** * @} */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /* Private macros ------------------------------------------------------------*/ /** @defgroup SPI_Private_Macros SPI Private Macros * @{ */ /** @brief Set the SPI transmit-only mode. * @param __HANDLE__: specifies the SPI Handle. * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. * @retval None */ #define SPI_1LINE_TX(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_BIDIOE) /** @brief Set the SPI receive-only mode. * @param __HANDLE__: specifies the SPI Handle. * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. * @retval None */ #define SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_BIDIOE)) /** @brief Reset the CRC calculation of the SPI. * @param __HANDLE__: specifies the SPI Handle. * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. * @retval None */ #define SPI_RESET_CRC(__HANDLE__) do{(__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_CRCEN);\ (__HANDLE__)->Instance->CR1 |= SPI_CR1_CRCEN;}while(0) #define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \ ((MODE) == SPI_MODE_MASTER)) #define IS_SPI_DIRECTION(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \ ((MODE) == SPI_DIRECTION_2LINES_RXONLY) || \ ((MODE) == SPI_DIRECTION_1LINE)) #define IS_SPI_DIRECTION_2LINES(MODE) ((MODE) == SPI_DIRECTION_2LINES) #define IS_SPI_DIRECTION_2LINES_OR_1LINE(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \ ((MODE) == SPI_DIRECTION_1LINE)) #define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \ ((DATASIZE) == SPI_DATASIZE_8BIT)) #define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \ ((CPOL) == SPI_POLARITY_HIGH)) #define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \ ((CPHA) == SPI_PHASE_2EDGE)) #define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT) || \ ((NSS) == SPI_NSS_HARD_INPUT) || \ ((NSS) == SPI_NSS_HARD_OUTPUT)) #define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BAUDRATEPRESCALER_2) || \ ((PRESCALER) == SPI_BAUDRATEPRESCALER_4) || \ ((PRESCALER) == SPI_BAUDRATEPRESCALER_8) || \ ((PRESCALER) == SPI_BAUDRATEPRESCALER_16) || \ ((PRESCALER) == SPI_BAUDRATEPRESCALER_32) || \ ((PRESCALER) == SPI_BAUDRATEPRESCALER_64) || \ ((PRESCALER) == SPI_BAUDRATEPRESCALER_128) || \ ((PRESCALER) == SPI_BAUDRATEPRESCALER_256)) #define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \ ((BIT) == SPI_FIRSTBIT_LSB)) #define IS_SPI_TIMODE(MODE) (((MODE) == SPI_TIMODE_DISABLE) || \ ((MODE) == SPI_TIMODE_ENABLE)) #define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLE) || \ ((CALCULATION) == SPI_CRCCALCULATION_ENABLE)) #define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) (((POLYNOMIAL) >= 0x01U) && ((POLYNOMIAL) <= 0xFFFFU)) /** * @} */ /* Private functions ---------------------------------------------------------*/ /** @defgroup SPI_Private_Functions SPI Private Functions * @{ */ /** * @} */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F4xx_HAL_SPI_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/