Mouse code for the MacroRat
mbed-dev/targets/TARGET_NXP/TARGET_LPC82X/TARGET_LPC824/device/TOOLCHAIN_GCC_ARM/startup_LPC824.S
- Committer:
- sahilmgandhi
- Date:
- 2017-06-03
- Revision:
- 46:b156ef445742
- Parent:
- 18:6a4db94011d3
File content as of revision 46:b156ef445742:
/* File: startup_ARMCM0.S * Purpose: startup file for Cortex-M0 devices. Should use with * GCC for ARM Embedded Processors * Version: V1.2 * Date: 15 Nov 2011 * * Copyright (c) 2011, ARM Limited * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the ARM Limited nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL ARM LIMITED BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ .syntax unified .arch armv6-m /* Memory Model The HEAP starts at the end of the DATA section and grows upward. The STACK starts at the end of the RAM and grows downward. The HEAP and stack STACK are only checked at compile time: (DATA_SIZE + HEAP_SIZE + STACK_SIZE) < RAM_SIZE This is just a check for the bare minimum for the Heap+Stack area before aborting compilation, it is not the run time limit: Heap_Size + Stack_Size = 0x80 + 0x80 = 0x100 */ .section .stack .align 3 #ifdef __STACK_SIZE .equ Stack_Size, __STACK_SIZE #else .equ Stack_Size, 0x80 #endif .globl __StackTop .globl __StackLimit __StackLimit: .space Stack_Size .size __StackLimit, . - __StackLimit __StackTop: .size __StackTop, . - __StackTop .section .heap .align 3 #ifdef __HEAP_SIZE .equ Heap_Size, __HEAP_SIZE #else .equ Heap_Size, 0x80 #endif .globl __HeapBase .globl __HeapLimit __HeapBase: .space Heap_Size .size __HeapBase, . - __HeapBase __HeapLimit: .size __HeapLimit, . - __HeapLimit .section .isr_vector .align 2 .globl __isr_vector __isr_vector: .long __StackTop /* Top of Stack */ .long Reset_Handler /* Reset Handler */ .long NMI_Handler /* NMI Handler */ .long HardFault_Handler /* Hard Fault Handler */ .long 0 /* Reserved */ .long 0 /* Reserved */ .long 0 /* Reserved */ .long 0 /* Reserved */ .long 0 /* Reserved */ .long 0 /* Reserved */ .long 0 /* Reserved */ .long SVC_Handler /* SVCall Handler */ .long 0 /* Reserved */ .long 0 /* Reserved */ .long PendSV_Handler /* PendSV Handler */ .long SysTick_Handler /* SysTick Handler */ /* LPC824 interrupts */ .long SPI0_IRQHandler // SPI0 controller .long SPI1_IRQHandler // SPI1 controller .long 0 // Reserved .long UART0_IRQHandler // UART0 .long UART1_IRQHandler // UART1 .long UART2_IRQHandler // UART2 .long 0 // Reserved .long I2C1_IRQHandler // I2C ch1 controller .long I2C0_IRQHandler // I2C ch0 controller .long SCT_IRQHandler // Smart Counter Timer .long MRT_IRQHandler // Multi-Rate Timer .long CMP_IRQHandler // Comparator .long WDT_IRQHandler // PIO1 (0:11) .long BOD_IRQHandler // Brown Out Detect .long Flash_IRQHandler // Flash interrupt .long WKT_IRQHandler // Wakeup timer .long ADC_SEQA_IRQHandler // ADC sequence A completion .long ADC_SEQB_IRQHandler // ADC sequence B completion .long ADC_THCMP_IRQHandler // ADC threshold compare .long ADC_OVR_IRQHandler // ADC overrun .long DMA_IRQHandler // DMA interrupt .long I2C2_IRQHandler // I2C2 controller .long I2C3_IRQHandler // I2C3 controller .long 0 // Reserved .long PININT0_IRQHandler // PIO INT0 .long PININT1_IRQHandler // PIO INT1 .long PININT2_IRQHandler // PIO INT2 .long PININT3_IRQHandler // PIO INT3 .long PININT4_IRQHandler // PIO INT4 .long PININT5_IRQHandler // PIO INT5 .long PININT6_IRQHandler // PIO INT6 .long PININT7_IRQHandler // PIO INT7 .size __isr_vector, . - __isr_vector .section .text.Reset_Handler .thumb .thumb_func .align 2 .globl Reset_Handler .type Reset_Handler, %function Reset_Handler: /* Loop to copy data from read only memory to RAM. The ranges * of copy from/to are specified by following symbols evaluated in * linker script. * __etext: End of code section, i.e., begin of data sections to copy from. * __data_start__/__data_end__: RAM address range that data should be * copied to. Both must be aligned to 4 bytes boundary. */ ldr r1, =__etext ldr r2, =__data_start__ ldr r3, =__data_end__ subs r3, r2 ble .Lflash_to_ram_loop_end movs r4, 0 .Lflash_to_ram_loop: ldr r0, [r1,r4] str r0, [r2,r4] adds r4, 4 cmp r4, r3 blt .Lflash_to_ram_loop .Lflash_to_ram_loop_end: ldr r0, =SystemInit blx r0 ldr r0, =_start bx r0 .pool .size Reset_Handler, . - Reset_Handler .text /* Macro to define default handlers. Default handler * will be weak symbol and just dead loops. They can be * overwritten by other handlers */ .macro def_default_handler handler_name .align 1 .thumb_func .weak \handler_name .type \handler_name, %function \handler_name : b . .size \handler_name, . - \handler_name .endm def_default_handler NMI_Handler def_default_handler HardFault_Handler def_default_handler SVC_Handler def_default_handler PendSV_Handler def_default_handler SysTick_Handler def_default_handler Default_Handler .macro def_irq_default_handler handler_name .weak \handler_name .set \handler_name, Default_Handler .endm def_irq_default_handler SPI0_IRQHandler def_irq_default_handler SPI1_IRQHandler def_irq_default_handler UART0_IRQHandler def_irq_default_handler UART1_IRQHandler def_irq_default_handler UART2_IRQHandler def_irq_default_handler I2C0_IRQHandler def_irq_default_handler I2C1_IRQHandler def_irq_default_handler I2C2_IRQHandler def_irq_default_handler I2C3_IRQHandler def_irq_default_handler SCT_IRQHandler def_irq_default_handler MRT_IRQHandler def_irq_default_handler CMP_IRQHandler def_irq_default_handler WDT_IRQHandler def_irq_default_handler BOD_IRQHandler def_irq_default_handler Flash_IRQHandler def_irq_default_handler WKT_IRQHandler def_irq_default_handler ADC_SEQA_IRQHandler def_irq_default_handler ADC_SEQB_IRQHandler def_irq_default_handler ADC_THCMP_IRQHandler def_irq_default_handler ADC_OVR_IRQHandler def_irq_default_handler DMA_IRQHandler def_irq_default_handler PININT0_IRQHandler def_irq_default_handler PININT1_IRQHandler def_irq_default_handler PININT2_IRQHandler def_irq_default_handler PININT3_IRQHandler def_irq_default_handler PININT4_IRQHandler def_irq_default_handler PININT5_IRQHandler def_irq_default_handler PININT6_IRQHandler def_irq_default_handler PININT7_IRQHandler .end