Mouse code for the MacroRat
mbed-dev/targets/TARGET_ARM_SSG/TARGET_BEETLE/device/TOOLCHAIN_GCC_ARM/BEETLE.ld
- Committer:
- sahilmgandhi
- Date:
- 2017-06-03
- Revision:
- 46:b156ef445742
- Parent:
- 18:6a4db94011d3
File content as of revision 46:b156ef445742:
/* * BEETLE CMSIS Library */ /* * Copyright (c) 2009-2016 ARM Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the License); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ /* * This file is derivative of CMSIS V5.00 gcc_arm.ld */ /* Linker script for mbed BEETLE SoC */ /* Linker script to configure memory regions. */ MEMORY { VECTORS (rx) : ORIGIN = 0x00000000, LENGTH = 0x00000400 FLASH (rx) : ORIGIN = 0x00000400, LENGTH = 0x00040000 - 0x00000400 RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00020000 } /* Linker script to place sections and symbol values. Should be used together * with other linker script that defines memory regions FLASH and RAM. * It references following symbols, which must be defined in code: * Reset_Handler : Entry of reset handler * * It defines following symbols, which code can use without definition: * __exidx_start * __exidx_end * __etext * __data_start__ * __preinit_array_start * __preinit_array_end * __init_array_start * __init_array_end * __fini_array_start * __fini_array_end * __data_end__ * __bss_start__ * __bss_end__ * __end__ * end * __HeapLimit * __StackLimit * __StackTop * __stack */ ENTRY(Reset_Handler) /* Heap 1/4 of ram and stack 1/8 */ __stack_size__ = 0x4000; __heap_size__ = 0x8000; HEAP_SIZE = DEFINED(__heap_size__) ? __heap_size__ : 0x0400; STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x0400; /* Size of the vector table in SRAM */ M_VECTOR_RAM_SIZE = 0x140; SECTIONS { .isr_vector : { __vector_table = .; KEEP(*(.vector_table)) . = ALIGN(4); } > VECTORS /* Note: The uVisor expects this section at a fixed location, as specified by the porting process configuration parameter: FLASH_OFFSET. */ __UVISOR_TEXT_OFFSET = 0x0; __UVISOR_TEXT_START = ORIGIN(FLASH) + __UVISOR_TEXT_OFFSET; .text __UVISOR_TEXT_START : { /* uVisor code and data */ . = ALIGN(4); __uvisor_main_start = .; *(.uvisor.main) __uvisor_main_end = .; *(.text*) KEEP(*(.init)) KEEP(*(.fini)) /* .ctors */ *crtbegin.o(.ctors) *crtbegin?.o(.ctors) *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) *(SORT(.ctors.*)) *(.ctors) /* .dtors */ *crtbegin.o(.dtors) *crtbegin?.o(.dtors) *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) *(SORT(.dtors.*)) *(.dtors) *(.rodata*) KEEP(*(.eh_frame*)) } > FLASH .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } > FLASH __exidx_start = .; .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } > FLASH __exidx_end = .; .cordio : { *CORDIO_RO_2.1.o *TRIM_2.1.o } > FLASH .interrupts_ram : { . = ALIGN(4); __VECTOR_RAM__ = .; __interrupts_ram_start__ = .; /* Create a global symbol at data start */ . += M_VECTOR_RAM_SIZE; . = ALIGN(4); __interrupts_ram_end__ = .; /* Define a global symbol at data end */ } > RAM /* ensure that uvisor bss is at the beginning of memory */ /* Note: The uVisor expects this section at a fixed location, as specified by * the porting process configuration parameter: SRAM_OFFSET. */ __UVISOR_SRAM_OFFSET = 0x140; __UVISOR_BSS_START = ORIGIN(RAM) + __UVISOR_SRAM_OFFSET; .uvisor.bss __UVISOR_BSS_START (NOLOAD): { . = ALIGN(32); __uvisor_bss_start = .; /* protected uvisor main bss */ . = ALIGN(32); __uvisor_bss_main_start = .; KEEP(*(.keep.uvisor.bss.main)) . = ALIGN(32); __uvisor_bss_main_end = .; /* protected uvisor secure boxes bss */ . = ALIGN(32); __uvisor_bss_boxes_start = .; KEEP(*(.keep.uvisor.bss.boxes)) . = ALIGN(32); __uvisor_bss_boxes_end = .; . = ALIGN((1 << LOG2CEIL(LENGTH(RAM))) / 8); __uvisor_bss_end = .; } > RAM /* Heap space for the page allocator */ .page_heap (NOLOAD) : { . = ALIGN(32); __uvisor_page_start = .; KEEP(*(.keep.uvisor.page_heap)) . = ALIGN(32); __uvisor_page_end = .; } > RAM .data : { PROVIDE(__etext = LOADADDR(.data)); . = ALIGN(4); __data_start__ = .; *(vtable) *(.data) *(.data*) . = ALIGN(4); /* preinit data */ PROVIDE (__preinit_array_start = .); KEEP(*(.preinit_array)) PROVIDE (__preinit_array_end = .); . = ALIGN(4); /* init data */ PROVIDE (__init_array_start = .); KEEP(*(SORT(.init_array.*))) KEEP(*(.init_array)) PROVIDE (__init_array_end = .); . = ALIGN(4); /* finit data */ PROVIDE (__fini_array_start = .); KEEP(*(SORT(.fini_array.*))) KEEP(*(.fini_array)) PROVIDE (__fini_array_end = .); . = ALIGN(4); /* All data end */ __data_end__ = .; } > RAM AT > FLASH /* uvisor configuration data */ .uvisor.secure : { . = ALIGN(32); __uvisor_secure_start = .; /* uvisor secure boxes configuration tables */ . = ALIGN(32); __uvisor_cfgtbl_start = .; KEEP(*(.keep.uvisor.cfgtbl)) . = ALIGN(32); __uvisor_cfgtbl_end = .; __uvisor_cfgtbl_ptr_start = .; KEEP(*(.keep.uvisor.cfgtbl_ptr_first)) KEEP(*(.keep.uvisor.cfgtbl_ptr)) __uvisor_cfgtbl_ptr_end = .; /* Pointers to all boxes register gateways. These are grouped here to allow * discoverability and firmware verification. */ __uvisor_register_gateway_ptr_start = .; KEEP(*(.keep.uvisor.register_gateway_ptr)) __uvisor_register_gateway_ptr_end = .; . = ALIGN(32); __uvisor_secure_end = .; } > FLASH /* From now on you can insert any other SRAM region. */ .uninitialized (NOLOAD): { . = ALIGN(32); __uninitialized_start = .; *(.uninitialized) KEEP(*(.keep.uninitialized)) . = ALIGN(32); __uninitialized_end = .; } > RAM .bss : { . = ALIGN(4); __START_BSS = .; __bss_start__ = .; *(.bss) *(.bss*) *(COMMON) . = ALIGN(4); __bss_end__ = .; __END_BSS = .; } > RAM bss_size = __bss_end__ - __bss_start__; .heap : { . = ALIGN(8); __uvisor_heap_start = .; __end__ = .; PROVIDE(end = .); __HeapBase = .; . += HEAP_SIZE; __HeapLimit = .; __heap_limit = .; /* Add for _sbrk */ __uvisor_heap_end = .; } > RAM /* Set stack top to end of RAM, and stack limit move down by * size of stack_dummy section */ __StackTop = ORIGIN(RAM) + LENGTH(RAM); __StackLimit = __StackTop - STACK_SIZE; PROVIDE(__stack = __StackTop); /* Check if data + heap + stack exceeds RAM limit */ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") /* Provide physical memory boundaries for uVisor. */ __uvisor_flash_start = ORIGIN(VECTORS); __uvisor_flash_end = ORIGIN(FLASH) + LENGTH(FLASH); __uvisor_sram_start = ORIGIN(RAM); __uvisor_sram_end = ORIGIN(RAM) + LENGTH(RAM); } /* End of sections */