Mouse code for the MacroRat
mbed-dev/targets/TARGET_RENESAS/TARGET_RZ_A1H/device/mmu_Renesas_RZ_A1.c
- Committer:
- sahilmgandhi
- Date:
- 2017-05-14
- Revision:
- 18:6a4db94011d3
File content as of revision 18:6a4db94011d3:
/**************************************************************************//** * @file mmu_Renesas_RZ_A1.c * @brief MMU Startup File for * mmu_Renesas_RZ_A1 Device Series * @version V1.01 * @date 2 Aug 2013 * * @note * ******************************************************************************/ /* Copyright (c) 2011 - 2013 ARM LIMITED All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - Neither the name of ARM nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---------------------------------------------------------------------------*/ #define Renesas_RZ_A1_SPI_MIO_BASE (0x3fe00000UL) /*!< (SPI_MIO ) Base Address */ #define Renesas_RZ_A1_BSC_BASE (0x3ff00000UL) /*!< (BSC ) Base Address */ #define Renesas_RZ_A1_PERIPH_BASE0 (0xe8000000UL) /*!< (PERIPH0 ) Base Address */ #define Renesas_RZ_A1_PERIPH_BASE1 (0xfcf00000UL) /*!< (PERIPH1 ) Base Address */ // L1 Cache info and restrictions about architecture of the caches (CCSIR register): // Write-Through support *not* available // Write-Back support available. // Read allocation support available. // Write allocation support available. //Note: You should use the Shareable attribute carefully. //For cores without coherency logic (such as SCU) marking a region as shareable forces the processor to not cache that region regardless the inner cache settings. //CA9-RTX uses LDREX/STREX instructions relying on Local monitors. Local monitors will be used only when the region gets cached, regions that are not cached will use the Global Monitor. //Some A9 implementations does not include Global Monitors, so wrongly setting the attribute Shareable may cause STREX to fail. //Recall: When the Shareable attribute is applied to a memory region that is not Write-Back, Normal memory, data held in this region is treated as Non-cacheable. //When SMP bit = 0, Inner WB/WA Cacheable Shareable attributes are treated as Non-cacheable. //When SMP bit = 1, Inner WB/WA Cacheable Shareable attributes are treated as Cacheable. //Following MMU configuration is expected //SCTLR.AFE == 1 (Simplified access permissions model - AP[2:1] define access permissions, AP[0] is an access flag) //SCTLR.TRE == 0 (TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor) //Domain 0 is always the Client domain //Descriptors place all memory in domain 0 //There are no restrictions by privilege level (PL0 can access all memory) #include <stdint.h> #include "MBRZA1H.h" //Import symbols from linker extern uint32_t Image$$VECTORS$$Base; extern uint32_t Image$$RO_DATA$$Base; extern uint32_t Image$$RW_DATA$$Base; extern uint32_t Image$$ZI_DATA$$Base; #if !defined ( __ICCARM__ ) extern uint32_t Image$$TTB$$ZI$$Base; #endif #if defined( __CC_ARM ) #elif defined( __ICCARM__ ) #else extern uint32_t Image$$RW_DATA_NC$$Base; extern uint32_t Image$$ZI_DATA_NC$$Base; #endif extern uint32_t Image$$VECTORS$$Limit; extern uint32_t Image$$RO_DATA$$Limit; extern uint32_t Image$$RW_DATA$$Limit; extern uint32_t Image$$ZI_DATA$$Limit; #if defined( __CC_ARM ) #else extern uint32_t Image$$RW_DATA_NC$$Limit; extern uint32_t Image$$ZI_DATA_NC$$Limit; #endif #if defined( __ICCARM__ ) #define VECTORS_SIZE (((uint32_t)Image$$VECTORS$$Limit >> 20) - ((uint32_t)Image$$VECTORS$$Base >> 20) + 1) #define RO_DATA_SIZE (((uint32_t)Image$$RO_DATA$$Limit >> 20) - ((uint32_t)Image$$RO_DATA$$Base >> 20) + 1) #define RW_DATA_SIZE (((uint32_t)Image$$RW_DATA$$Limit >> 20) - ((uint32_t)Image$$RW_DATA$$Base >> 20) + 1) #define ZI_DATA_SIZE (((uint32_t)Image$$ZI_DATA$$Limit >> 20) - ((uint32_t)Image$$ZI_DATA$$Base >> 20) + 1) #else #define VECTORS_SIZE (((uint32_t)&Image$$VECTORS$$Limit >> 20) - ((uint32_t)&Image$$VECTORS$$Base >> 20) + 1) #define RO_DATA_SIZE (((uint32_t)&Image$$RO_DATA$$Limit >> 20) - ((uint32_t)&Image$$RO_DATA$$Base >> 20) + 1) #define RW_DATA_SIZE (((uint32_t)&Image$$RW_DATA$$Limit >> 20) - ((uint32_t)&Image$$RW_DATA$$Base >> 20) + 1) #define ZI_DATA_SIZE (((uint32_t)&Image$$ZI_DATA$$Limit >> 20) - ((uint32_t)&Image$$ZI_DATA$$Base >> 20) + 1) #endif #if defined( __CC_ARM ) #else #define RW_DATA_NC_SIZE (((uint32_t)&Image$$RW_DATA_NC$$Limit >> 20) - ((uint32_t)&Image$$RW_DATA_NC$$Base >> 20) + 1) #define ZI_DATA_NC_SIZE (((uint32_t)&Image$$ZI_DATA_NC$$Limit >> 20) - ((uint32_t)&Image$$ZI_DATA_NC$$Base >> 20) + 1) #endif static uint32_t Sect_Normal; //outer & inner wb/wa, non-shareable, executable, rw, domain 0, base addr 0 static uint32_t Sect_Normal_NC; //non-shareable, non-executable, rw, domain 0, base addr 0 static uint32_t Sect_Normal_Cod; //outer & inner wb/wa, non-shareable, executable, ro, domain 0, base addr 0 static uint32_t Sect_Normal_RO; //as Sect_Normal_Cod, but not executable static uint32_t Sect_Normal_RW; //as Sect_Normal_Cod, but writeable and not executable static uint32_t Sect_Device_RO; //device, non-shareable, non-executable, ro, domain 0, base addr 0 static uint32_t Sect_Device_RW; //as Sect_Device_RO, but writeable /* Define global descriptors */ static uint32_t Page_L1_4k = 0x0; //generic static uint32_t Page_L1_64k = 0x0; //generic static uint32_t Page_4k_Device_RW; //Shared device, not executable, rw, domain 0 static uint32_t Page_64k_Device_RW; //Shared device, not executable, rw, domain 0 #if defined ( __ICCARM__ ) __no_init uint32_t Image$$TTB$$ZI$$Base @ ".retram"; uint32_t Image$$VECTORS$$Base; uint32_t Image$$RO_DATA$$Base; uint32_t Image$$RW_DATA$$Base; uint32_t Image$$ZI_DATA$$Base; uint32_t Image$$VECTORS$$Limit; uint32_t Image$$RO_DATA$$Limit; uint32_t Image$$RW_DATA$$Limit; uint32_t Image$$ZI_DATA$$Limit; #endif void create_translation_table(void) { mmu_region_attributes_Type region; #if defined ( __ICCARM__ ) #pragma section=".intvec" #pragma section=".rodata" #pragma section=".rwdata" #pragma section=".bss" Image$$VECTORS$$Base = (uint32_t) __section_begin(".intvec"); Image$$VECTORS$$Limit= ((uint32_t)__section_begin(".intvec")+(uint32_t)__section_size(".intvec")); Image$$RO_DATA$$Base = (uint32_t) __section_begin(".rodata"); Image$$RO_DATA$$Limit= ((uint32_t)__section_begin(".rodata")+(uint32_t)__section_size(".rodata")); Image$$RW_DATA$$Base = (uint32_t) __section_begin(".rwdata"); Image$$RW_DATA$$Limit= ((uint32_t)__section_begin(".rwdata")+(uint32_t)__section_size(".rwdata")); Image$$ZI_DATA$$Base = (uint32_t) __section_begin(".bss"); Image$$ZI_DATA$$Limit= ((uint32_t)__section_begin(".bss")+(uint32_t)__section_size(".bss")); #endif /* * Generate descriptors. Refer to MBRZA1H.h to get information about attributes * */ //Create descriptors for Vectors, RO, RW, ZI sections section_normal(Sect_Normal, region); section_normal_cod(Sect_Normal_Cod, region); section_normal_ro(Sect_Normal_RO, region); section_normal_rw(Sect_Normal_RW, region); //Create descriptors for peripherals section_device_ro(Sect_Device_RO, region); section_device_rw(Sect_Device_RW, region); section_normal_nc(Sect_Normal_NC, region); //Create descriptors for 64k pages page64k_device_rw(Page_L1_64k, Page_64k_Device_RW, region); //Create descriptors for 4k pages page4k_device_rw(Page_L1_4k, Page_4k_Device_RW, region); /* * Define MMU flat-map regions and attributes * */ //Create 4GB of faulting entries __TTSection (&Image$$TTB$$ZI$$Base, 0, 4096, DESCRIPTOR_FAULT); // R7S72100 memory map. __TTSection (&Image$$TTB$$ZI$$Base, Renesas_RZ_A1_NORFLASH_BASE0 , 64, Sect_Normal_RO); __TTSection (&Image$$TTB$$ZI$$Base, Renesas_RZ_A1_NORFLASH_BASE1 , 64, Sect_Normal_RO); __TTSection (&Image$$TTB$$ZI$$Base, Renesas_RZ_A1_SDRAM_BASE0 , 64, Sect_Normal_RW); __TTSection (&Image$$TTB$$ZI$$Base, Renesas_RZ_A1_SDRAM_BASE1 , 64, Sect_Normal_RW); __TTSection (&Image$$TTB$$ZI$$Base, Renesas_RZ_A1_USER_AREA0 , 64, Sect_Normal_RW); __TTSection (&Image$$TTB$$ZI$$Base, Renesas_RZ_A1_USER_AREA1 , 64, Sect_Normal_RW); __TTSection (&Image$$TTB$$ZI$$Base, Renesas_RZ_A1_SPI_IO0 , 64, Sect_Normal_RO); __TTSection (&Image$$TTB$$ZI$$Base, Renesas_RZ_A1_SPI_IO1 , 64, Sect_Normal_RO); __TTSection (&Image$$TTB$$ZI$$Base, Renesas_RZ_A1_ONCHIP_SRAM_BASE , 10, Sect_Normal_RW); __TTSection (&Image$$TTB$$ZI$$Base, Renesas_RZ_A1_SPI_MIO_BASE , 1, Sect_Device_RW); __TTSection (&Image$$TTB$$ZI$$Base, Renesas_RZ_A1_BSC_BASE , 1, Sect_Device_RW); __TTSection (&Image$$TTB$$ZI$$Base, Renesas_RZ_A1_PERIPH_BASE0 , 3, Sect_Device_RW); __TTSection (&Image$$TTB$$ZI$$Base, Renesas_RZ_A1_PERIPH_BASE1 , 49, Sect_Device_RW); #if defined( __ICCARM__ ) //Define Image __TTSection (&Image$$TTB$$ZI$$Base, (uint32_t)Image$$RO_DATA$$Base, RO_DATA_SIZE, Sect_Normal_Cod); __TTSection (&Image$$TTB$$ZI$$Base, (uint32_t)Image$$VECTORS$$Base, VECTORS_SIZE, Sect_Normal_Cod); __TTSection (&Image$$TTB$$ZI$$Base, (uint32_t)Image$$RW_DATA$$Base, RW_DATA_SIZE, Sect_Normal_RW); __TTSection (&Image$$TTB$$ZI$$Base, (uint32_t)Image$$ZI_DATA$$Base, ZI_DATA_SIZE, Sect_Normal_RW); #else //Define Image __TTSection (&Image$$TTB$$ZI$$Base, (uint32_t)&Image$$RO_DATA$$Base, RO_DATA_SIZE, Sect_Normal_Cod); __TTSection (&Image$$TTB$$ZI$$Base, (uint32_t)&Image$$VECTORS$$Base, VECTORS_SIZE, Sect_Normal_Cod); __TTSection (&Image$$TTB$$ZI$$Base, (uint32_t)&Image$$RW_DATA$$Base, RW_DATA_SIZE, Sect_Normal_RW); __TTSection (&Image$$TTB$$ZI$$Base, (uint32_t)&Image$$ZI_DATA$$Base, ZI_DATA_SIZE, Sect_Normal_RW); #endif #if defined( __CC_ARM ) __TTSection (&Image$$TTB$$ZI$$Base, Renesas_RZ_A1_ONCHIP_SRAM_NC_BASE, 10, Sect_Normal_NC); #elif defined ( __ICCARM__ ) __TTSection (&Image$$TTB$$ZI$$Base, Renesas_RZ_A1_ONCHIP_SRAM_NC_BASE, 10, Sect_Normal_NC); #else __TTSection (&Image$$TTB$$ZI$$Base, (uint32_t)&Image$$RW_DATA_NC$$Base, RW_DATA_NC_SIZE, Sect_Normal_NC); __TTSection (&Image$$TTB$$ZI$$Base, (uint32_t)&Image$$ZI_DATA_NC$$Base, ZI_DATA_NC_SIZE, Sect_Normal_NC); #endif /* Set location of level 1 page table ; 31:14 - Translation table base addr (31:14-TTBCR.N, TTBCR.N is 0 out of reset) ; 13:7 - 0x0 ; 6 - IRGN[0] 0x0 (Inner WB WA) ; 5 - NOS 0x0 (Non-shared) ; 4:3 - RGN 0x1 (Outer WB WA) ; 2 - IMP 0x0 (Implementation Defined) ; 1 - S 0x0 (Non-shared) ; 0 - IRGN[1] 0x1 (Inner WB WA) */ __set_TTBR0(((uint32_t)&Image$$TTB$$ZI$$Base) | 9); /* Set up domain access control register ; We set domain 0 to Client and all other domains to No Access. ; All translation table entries specify domain 0 */ __set_DACR(1); } /*---------------------------------------------------------------------------- * end of file *---------------------------------------------------------------------------*/