Mouse code for the MacroRat
mbed-dev/targets/TARGET_NUVOTON/TARGET_NUC472/device/StdDriver/nuc472_emac.h
- Committer:
- sahilmgandhi
- Date:
- 2017-05-14
- Revision:
- 18:6a4db94011d3
File content as of revision 18:6a4db94011d3:
/**************************************************************************//** * @file emac.h * @version V1.00 * $Revision: 9 $ * $Date: 14/05/29 1:13p $ * @brief NUC472/NUC442 EMAC driver header file * * @note * Copyright (C) 2013 Nuvoton Technology Corp. All rights reserved. *****************************************************************************/ #ifndef __EMAC_H__ #define __EMAC_H__ #ifdef __cplusplus extern "C" { #endif /** @addtogroup NUC472_442_Device_Driver NUC472/NUC442 Device Driver @{ */ /** @addtogroup NUC472_442_EMAC_Driver EMAC Driver @{ */ /** @addtogroup NUC472_442_EMAC_EXPORTED_CONSTANTS EMAC Exported Constants @{ */ #define EMAC_PHY_ADDR 1 ///< PHY address, this address is board dependent #define EMAC_RX_DESC_SIZE 4 ///< Number of Rx Descriptors, should be 2 at least #define EMAC_TX_DESC_SIZE 4 ///< Number of Tx Descriptors, should be 2 at least /*@}*/ /* end of group NUC472_442_EMAC_EXPORTED_CONSTANTS */ /** @addtogroup NUC472_442_EMAC_EXPORTED_FUNCTIONS EMAC Exported Functions @{ */ /** * @brief Enable EMAC Tx function * @param None * @return None * \hideinitializer */ #define EMAC_ENABLE_TX() (EMAC->CTL |= EMAC_CTL_TXON_Msk) /** * @brief Enable EMAC Rx function * @param None * @return None * \hideinitializer */ #define EMAC_ENABLE_RX() do{EMAC->CTL |= EMAC_CTL_RXON_Msk; EMAC->RXST = 0;}while(0) /** * @brief Disable EMAC Tx function * @param None * @return None * \hideinitializer */ #define EMAC_DISABLE_TX() (EMAC->CTL &= ~EMAC_CTL_TXON_Msk) /** * @brief Disable EMAC Rx function * @param None * @return None * \hideinitializer */ #define EMAC_DISABLE_RX() (EMAC->CTL &= ~EMAC_CTL_RXON_Msk) /** * @brief Enable EMAC Magic Packet Wakeup function * @param None * @return None * \hideinitializer */ #define EMAC_ENABLE_MAGIC_PKT_WAKEUP() (EMAC->CTL |= EMAC_CTL_WOLEN_Msk) /** * @brief Disable EMAC Magic Packet Wakeup function * @param None * @return None * \hideinitializer */ #define EMAC_DISABLE_MAGIC_PKT_WAKEUP() (EMAC->CTL &= ~EMAC_CTL_WOLEN_Msk) /** * @brief Enable EMAC MII interface * @param None * @return None * @details After calling \ref EMAC_Open, EMAC use RMII interface by default, but can switch to * MII interface by calling this macro * \hideinitializer */ #define EMAC_ENABLE_MII_INTF() (EMAC->CTL &= ~(EMAC_CTL_RMIIEN_Msk | EMAC_CTL_RMIIRXCTL_Msk)) /** * @brief Enable EMAC to receive broadcast packets * @param None * @return None * \hideinitializer */ #define EMAC_ENABLE_RECV_BCASTPKT() (EMAC->CAMCTL |= EMAC_CAMCTL_ABP_Msk) /** * @brief Disable EMAC to receive broadcast packets * @param None * @return None * \hideinitializer */ #define EMAC_DISABLE_RECV_BCASTPKT() (EMAC->CAMCTL &= ~EMAC_CAMCTL_ABP_Msk) /** * @brief Enable EMAC to receive multicast packets * @param None * @return None * \hideinitializer */ #define EMAC_ENABLE_RECV_MCASTPKT() (EMAC->CAMCTL |= EMAC_CAMCTL_AMP_Msk) /** * @brief Disable EMAC Magic Packet Wakeup function * @param None * @return None * \hideinitializer */ #define EMAC_DISABLE_RECV_MCASTPKT() (EMAC->CAMCTL &= ~EMAC_CAMCTL_AMP_Msk) /** * @brief Check if EMAC time stamp alarm interrupt occurred or not * @param None * @return If time stamp alarm interrupt occurred or not * @retval 0 Alarm interrupt does not occur * @retval 1 Alarm interrupt occurred * \hideinitializer */ #define EMAC_GET_ALARM_FLAG() (EMAC->INTSTS & EMAC_INTSTS_TSALMIF_Msk ? 1 : 0) /** * @brief Clear EMAC time stamp alarm interrupt flag * @param None * @return None * \hideinitializer */ #define EMAC_CLR_ALARM_FLAG() (EMAC->INTSTS = EMAC_INTSTS_TSALMIF_Msk) void EMAC_Open(uint8_t *pu8MacAddr); void EMAC_Close(void); void EMAC_SetMacAddr(uint8_t *pu8MacAddr); void EMAC_EnableCamEntry(uint32_t u32Entry, uint8_t *pu8MacAddr); void EMAC_DisableCamEntry(uint32_t u32Entry); uint32_t EMAC_RecvPkt(uint8_t *pu8Data, uint32_t *pu32Size); uint32_t EMAC_RecvPktTS(uint8_t *pu8Data, uint32_t *pu32Size, uint32_t *pu32Sec, uint32_t *pu32Nsec); void EMAC_RecvPktDone(void); uint32_t EMAC_SendPkt(uint8_t *pu8Data, uint32_t u32Size); uint32_t EMAC_SendPktDone(void); uint32_t EMAC_SendPktDoneTS(uint32_t *pu32Sec, uint32_t *pu32Nsec); void EMAC_EnableTS(uint32_t u32Sec, uint32_t u32Nsec); void EMAC_DisableTS(void); void EMAC_GetTime(uint32_t *pu32Sec, uint32_t *pu32Nsec); void EMAC_SetTime(uint32_t u32Sec, uint32_t u32Nsec); void EMAC_UpdateTime(uint32_t u32Neg, uint32_t u32Sec, uint32_t u32Nsec); void EMAC_EnableAlarm(uint32_t u32Sec, uint32_t u32Nsec); void EMAC_DisableAlarm(void); /*@}*/ /* end of group NUC472_442_EMAC_EXPORTED_FUNCTIONS */ /*@}*/ /* end of group NUC472_442_EMAC_Driver */ /*@}*/ /* end of group NUC472_442_Device_Driver */ #ifdef __cplusplus } #endif #endif //__EMAC_H__ /*** (C) COPYRIGHT 2013 Nuvoton Technology Corp. ***/