Mouse code for the MacroRat
Diff: mbed-dev/targets/TARGET_NUVOTON/TARGET_NUC472/device/StdDriver/nuc472_emac.h
- Revision:
- 18:6a4db94011d3
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-dev/targets/TARGET_NUVOTON/TARGET_NUC472/device/StdDriver/nuc472_emac.h Sun May 14 23:18:57 2017 +0000 @@ -0,0 +1,194 @@ +/**************************************************************************//** + * @file emac.h + * @version V1.00 + * $Revision: 9 $ + * $Date: 14/05/29 1:13p $ + * @brief NUC472/NUC442 EMAC driver header file + * + * @note + * Copyright (C) 2013 Nuvoton Technology Corp. All rights reserved. +*****************************************************************************/ +#ifndef __EMAC_H__ +#define __EMAC_H__ + +#ifdef __cplusplus +extern "C" +{ +#endif + + +/** @addtogroup NUC472_442_Device_Driver NUC472/NUC442 Device Driver + @{ +*/ + +/** @addtogroup NUC472_442_EMAC_Driver EMAC Driver + @{ +*/ + +/** @addtogroup NUC472_442_EMAC_EXPORTED_CONSTANTS EMAC Exported Constants + @{ +*/ + +#define EMAC_PHY_ADDR 1 ///< PHY address, this address is board dependent + +#define EMAC_RX_DESC_SIZE 4 ///< Number of Rx Descriptors, should be 2 at least +#define EMAC_TX_DESC_SIZE 4 ///< Number of Tx Descriptors, should be 2 at least + + +/*@}*/ /* end of group NUC472_442_EMAC_EXPORTED_CONSTANTS */ + + +/** @addtogroup NUC472_442_EMAC_EXPORTED_FUNCTIONS EMAC Exported Functions + @{ +*/ + + +/** + * @brief Enable EMAC Tx function + * @param None + * @return None + * \hideinitializer + */ +#define EMAC_ENABLE_TX() (EMAC->CTL |= EMAC_CTL_TXON_Msk) + + +/** + * @brief Enable EMAC Rx function + * @param None + * @return None + * \hideinitializer + */ +#define EMAC_ENABLE_RX() do{EMAC->CTL |= EMAC_CTL_RXON_Msk; EMAC->RXST = 0;}while(0) + +/** + * @brief Disable EMAC Tx function + * @param None + * @return None + * \hideinitializer + */ +#define EMAC_DISABLE_TX() (EMAC->CTL &= ~EMAC_CTL_TXON_Msk) + + +/** + * @brief Disable EMAC Rx function + * @param None + * @return None + * \hideinitializer + */ +#define EMAC_DISABLE_RX() (EMAC->CTL &= ~EMAC_CTL_RXON_Msk) + +/** + * @brief Enable EMAC Magic Packet Wakeup function + * @param None + * @return None + * \hideinitializer + */ +#define EMAC_ENABLE_MAGIC_PKT_WAKEUP() (EMAC->CTL |= EMAC_CTL_WOLEN_Msk) + + +/** + * @brief Disable EMAC Magic Packet Wakeup function + * @param None + * @return None + * \hideinitializer + */ +#define EMAC_DISABLE_MAGIC_PKT_WAKEUP() (EMAC->CTL &= ~EMAC_CTL_WOLEN_Msk) + +/** + * @brief Enable EMAC MII interface + * @param None + * @return None + * @details After calling \ref EMAC_Open, EMAC use RMII interface by default, but can switch to + * MII interface by calling this macro + * \hideinitializer + */ +#define EMAC_ENABLE_MII_INTF() (EMAC->CTL &= ~(EMAC_CTL_RMIIEN_Msk | EMAC_CTL_RMIIRXCTL_Msk)) + +/** + * @brief Enable EMAC to receive broadcast packets + * @param None + * @return None + * \hideinitializer + */ +#define EMAC_ENABLE_RECV_BCASTPKT() (EMAC->CAMCTL |= EMAC_CAMCTL_ABP_Msk) + +/** + * @brief Disable EMAC to receive broadcast packets + * @param None + * @return None + * \hideinitializer + */ +#define EMAC_DISABLE_RECV_BCASTPKT() (EMAC->CAMCTL &= ~EMAC_CAMCTL_ABP_Msk) + +/** + * @brief Enable EMAC to receive multicast packets + * @param None + * @return None + * \hideinitializer + */ +#define EMAC_ENABLE_RECV_MCASTPKT() (EMAC->CAMCTL |= EMAC_CAMCTL_AMP_Msk) + +/** + * @brief Disable EMAC Magic Packet Wakeup function + * @param None + * @return None + * \hideinitializer + */ +#define EMAC_DISABLE_RECV_MCASTPKT() (EMAC->CAMCTL &= ~EMAC_CAMCTL_AMP_Msk) + +/** + * @brief Check if EMAC time stamp alarm interrupt occurred or not + * @param None + * @return If time stamp alarm interrupt occurred or not + * @retval 0 Alarm interrupt does not occur + * @retval 1 Alarm interrupt occurred + * \hideinitializer + */ +#define EMAC_GET_ALARM_FLAG() (EMAC->INTSTS & EMAC_INTSTS_TSALMIF_Msk ? 1 : 0) + +/** + * @brief Clear EMAC time stamp alarm interrupt flag + * @param None + * @return None + * \hideinitializer + */ +#define EMAC_CLR_ALARM_FLAG() (EMAC->INTSTS = EMAC_INTSTS_TSALMIF_Msk) + + +void EMAC_Open(uint8_t *pu8MacAddr); +void EMAC_Close(void); +void EMAC_SetMacAddr(uint8_t *pu8MacAddr); +void EMAC_EnableCamEntry(uint32_t u32Entry, uint8_t *pu8MacAddr); +void EMAC_DisableCamEntry(uint32_t u32Entry); + +uint32_t EMAC_RecvPkt(uint8_t *pu8Data, uint32_t *pu32Size); +uint32_t EMAC_RecvPktTS(uint8_t *pu8Data, uint32_t *pu32Size, uint32_t *pu32Sec, uint32_t *pu32Nsec); +void EMAC_RecvPktDone(void); + +uint32_t EMAC_SendPkt(uint8_t *pu8Data, uint32_t u32Size); +uint32_t EMAC_SendPktDone(void); +uint32_t EMAC_SendPktDoneTS(uint32_t *pu32Sec, uint32_t *pu32Nsec); + +void EMAC_EnableTS(uint32_t u32Sec, uint32_t u32Nsec); +void EMAC_DisableTS(void); +void EMAC_GetTime(uint32_t *pu32Sec, uint32_t *pu32Nsec); +void EMAC_SetTime(uint32_t u32Sec, uint32_t u32Nsec); +void EMAC_UpdateTime(uint32_t u32Neg, uint32_t u32Sec, uint32_t u32Nsec); +void EMAC_EnableAlarm(uint32_t u32Sec, uint32_t u32Nsec); +void EMAC_DisableAlarm(void); + + + +/*@}*/ /* end of group NUC472_442_EMAC_EXPORTED_FUNCTIONS */ + +/*@}*/ /* end of group NUC472_442_EMAC_Driver */ + +/*@}*/ /* end of group NUC472_442_Device_Driver */ + +#ifdef __cplusplus +} +#endif + +#endif //__EMAC_H__ + +/*** (C) COPYRIGHT 2013 Nuvoton Technology Corp. ***/