Mouse code for the MacroRat
mbed-dev/targets/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_NRF51_MICROBIT/PinNames.h
- Committer:
- sahilmgandhi
- Date:
- 2017-05-14
- Revision:
- 18:6a4db94011d3
File content as of revision 18:6a4db94011d3:
/* mbed Microcontroller Library * Copyright (c) 2013 Nordic Semiconductor * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #ifdef __cplusplus extern "C" { #endif typedef enum { PIN_INPUT, PIN_OUTPUT } PinDirection; #define PORT_SHIFT 3 typedef enum { //MCU PINS P0_0 = 0, P0_1 = 1, P0_2 = 2, P0_3 = 3, P0_4 = 4, P0_5 = 5, P0_6 = 6, P0_7 = 7, P0_8 = 8, P0_9 = 9, P0_10 = 10, P0_11 = 11, P0_12 = 12, P0_13 = 13, P0_14 = 14, P0_15 = 15, P0_16 = 16, P0_17 = 17, P0_18 = 18, P0_19 = 19, P0_20 = 20, P0_21 = 21, P0_22 = 22, P0_23 = 23, P0_24 = 24, P0_25 = 25, P0_26 = 26, P0_27 = 27, P0_28 = 28, P0_29 = 29, P0_30 = 30, //MICROBIT EDGE CONNECTOR PINS P0 = P0_3, P1 = P0_2, P2 = P0_1, P3 = P0_4, P4 = P0_5, P5 = P0_17, P6 = P0_12, P7 = P0_11, P8 = P0_18, P9 = P0_10, P10 = P0_6, P11 = P0_26, P12 = P0_20, P13 = P0_23, P14 = P0_22, P15 = P0_21, P16 = P0_16, P19 = P0_0, P20 = P0_30, //PADS PAD3 = P0_1, PAD2 = P0_2, PAD1 = P0_3, //LED MATRIX COLS COL1 = P0_4, COL2 = P0_5, COL3 = P0_6, COL4 = P0_7, COL5 = P0_8, COL6 = P0_9, COL7 = P0_10, COL8 = P0_11, COL9 = P0_12, //LED MATRIX ROWS ROW1 = P0_13, ROW2 = P0_14, ROW3 = P0_15, //NORMAL PIN (NO SPECIFIED FUNCTIONALITY) //PIN_16 // BUTTON A BUTTON_A = P0_17, //NORMAL PIN (NO SPECIFIED FUNCTIONALITY) //PIN_18 //TARGET RESET TGT_NRESET = P0_19, //NORMAL PIN (NO SPECIFIED FUNCTIONALITY) //PIN_20 //MASTER OUT SLAVE IN MOSI = P0_21, //MASTER IN SLAVE OUT MISO = P0_22, //SERIAL CLOCK SCK = P0_23, // RX AND TX PINS TGT_TX = P0_24, TGT_RX = P0_25, //BUTTON B BUTTON_B = P0_26, //ACCEL INTERRUPT PINS (MMA8653FC) ACCEL_INT2 = P0_27, ACCEL_INT1 = P0_28, //MAGENETOMETER INTERRUPT PIN (MAG3110) MAG_INT1 = P0_29, // Not connected NC = (int)0xFFFFFFFF, RX_PIN_NUMBER = TGT_RX, TX_PIN_NUMBER = TGT_TX, CTS_PIN_NUMBER = 31, //unused ** REQUIRES A PROPER FIX ** RTS_PIN_NUMBER = 31, //unused // mBed interface Pins USBTX = TX_PIN_NUMBER, USBRX = RX_PIN_NUMBER, LED1 = PAD1, LED2 = PAD2, LED3 = PAD3, LED4 = P0_16, //SDA (SERIAL DATA LINE) I2C_SDA0 = P0_30, //SCL (SERIAL CLOCK LINE) I2C_SCL0 = P0_0 } PinName; typedef enum { PullNone = 0, PullDown = 1, PullUp = 3, PullDefault = PullUp } PinMode; #ifdef __cplusplus } #endif #endif