Diff: mbed-dev/targets/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_NRF51_MICROBIT/PinNames.h

Revision:

18:6a4db94011d3

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-dev/targets/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_NRF51_MICROBIT/PinNames.h	Sun May 14 23:18:57 2017 +0000
@@ -0,0 +1,184 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2013 Nordic Semiconductor
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT  3
+
+typedef enum {
+    //MCU PINS
+    P0_0  = 0,
+    P0_1  = 1,
+    P0_2  = 2,
+    P0_3  = 3,
+    P0_4  = 4,
+    P0_5  = 5,
+    P0_6  = 6,
+    P0_7  = 7,
+    P0_8  = 8,
+    P0_9  = 9,
+    P0_10 = 10,
+    P0_11 = 11,
+    P0_12 = 12,
+    P0_13 = 13,
+    P0_14 = 14,
+    P0_15 = 15,
+    P0_16 = 16,
+    P0_17 = 17,
+    P0_18 = 18,
+    P0_19 = 19,
+    P0_20 = 20,
+    P0_21 = 21,
+    P0_22 = 22,
+    P0_23 = 23,
+    P0_24 = 24,
+    P0_25 = 25,
+    P0_26 = 26,
+    P0_27 = 27,
+    P0_28 = 28,
+    P0_29 = 29,
+    P0_30 = 30,  
+   
+    //MICROBIT EDGE CONNECTOR PINS
+    P0  = P0_3,
+    P1  = P0_2,
+    P2  = P0_1,
+    P3  = P0_4,
+    P4  = P0_5,
+    P5  = P0_17,
+    P6  = P0_12,
+    P7  = P0_11,
+    P8  = P0_18,
+    P9  = P0_10,
+    P10 = P0_6,
+    P11 = P0_26,
+    P12 = P0_20,
+    P13 = P0_23,
+    P14 = P0_22,
+    P15 = P0_21,
+    P16 = P0_16,
+    P19 = P0_0,
+    P20 = P0_30,
+ 
+    //PADS
+    PAD3 = P0_1,
+    PAD2 = P0_2,
+    PAD1 = P0_3,
+    
+
+    //LED MATRIX COLS
+    COL1 = P0_4,
+    COL2 = P0_5,
+    COL3 = P0_6,
+    COL4 = P0_7,
+    COL5 = P0_8,
+    COL6 = P0_9,
+    COL7 = P0_10,
+    COL8 = P0_11,
+    COL9 = P0_12,
+
+    //LED MATRIX ROWS
+    ROW1 = P0_13,
+    ROW2 = P0_14,
+    ROW3 = P0_15,
+
+    //NORMAL PIN (NO SPECIFIED FUNCTIONALITY)
+    //PIN_16
+
+    // BUTTON A
+    BUTTON_A = P0_17,
+    
+
+    //NORMAL PIN (NO SPECIFIED FUNCTIONALITY)
+    //PIN_18
+    
+    //TARGET RESET
+    TGT_NRESET = P0_19,
+
+    //NORMAL PIN (NO SPECIFIED FUNCTIONALITY)
+    //PIN_20
+
+    //MASTER OUT SLAVE IN
+    MOSI = P0_21,
+    
+    //MASTER IN SLAVE OUT
+    MISO = P0_22,
+
+    //SERIAL CLOCK
+    SCK = P0_23,
+
+    // RX AND TX PINS
+    TGT_TX = P0_24,
+    TGT_RX = P0_25,
+
+    //BUTTON B
+    BUTTON_B = P0_26,
+    
+    //ACCEL INTERRUPT PINS (MMA8653FC)
+    ACCEL_INT2 = P0_27,
+    ACCEL_INT1 = P0_28,
+
+    //MAGENETOMETER INTERRUPT PIN (MAG3110)
+    MAG_INT1 = P0_29,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF,
+
+    RX_PIN_NUMBER = TGT_RX,
+    TX_PIN_NUMBER = TGT_TX,
+    CTS_PIN_NUMBER = 31, //unused  ** REQUIRES A PROPER FIX **
+    RTS_PIN_NUMBER = 31, //unused 
+
+    // mBed interface Pins
+    USBTX = TX_PIN_NUMBER,
+    USBRX = RX_PIN_NUMBER,
+
+    LED1    = PAD1,
+    LED2    = PAD2,
+    LED3    = PAD3,
+    LED4    = P0_16,
+
+    //SDA (SERIAL DATA LINE)
+    I2C_SDA0 = P0_30,
+
+    //SCL (SERIAL CLOCK LINE)
+    I2C_SCL0 = P0_0
+
+} PinName;
+
+typedef enum {
+    PullNone = 0,
+    PullDown = 1,
+    PullUp = 3,
+    PullDefault = PullUp
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif