Mouse code for the MacroRat
mbed-dev/targets/TARGET_Freescale/TARGET_K20XX/TARGET_K20D50M/PinNames.h
- Committer:
- sahilmgandhi
- Date:
- 2017-05-14
- Revision:
- 18:6a4db94011d3
File content as of revision 18:6a4db94011d3:
/* mbed Microcontroller Library * Copyright (c) 2006-2015 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #ifdef __cplusplus extern "C" { #endif typedef enum { PIN_INPUT, PIN_OUTPUT } PinDirection; /* PCR - 0x1000 */ #define PORT_SHIFT 12 typedef enum { PTA0 = 0x0, PTA1 = 0x4, PTA2 = 0x8, PTA3 = 0xc, PTA4 = 0x10, PTA5 = 0x14, PTA6 = 0x18, PTA7 = 0x1c, PTA8 = 0x20, PTA9 = 0x24, PTA10 = 0x28, PTA11 = 0x2c, PTA12 = 0x30, PTA13 = 0x34, PTA14 = 0x38, PTA15 = 0x3c, PTA16 = 0x40, PTA17 = 0x44, PTA18 = 0x48, PTA19 = 0x4c, PTA20 = 0x50, PTA21 = 0x54, PTA22 = 0x58, PTA23 = 0x5c, PTA24 = 0x60, PTA25 = 0x64, PTA26 = 0x68, PTA27 = 0x6c, PTA28 = 0x70, PTA29 = 0x74, PTA30 = 0x78, PTA31 = 0x7c, PTB0 = 0x1000, PTB1 = 0x1004, PTB2 = 0x1008, PTB3 = 0x100c, PTB4 = 0x1010, PTB5 = 0x1014, PTB6 = 0x1018, PTB7 = 0x101c, PTB8 = 0x1020, PTB9 = 0x1024, PTB10 = 0x1028, PTB11 = 0x102c, PTB12 = 0x1030, PTB13 = 0x1034, PTB14 = 0x1038, PTB15 = 0x103c, PTB16 = 0x1040, PTB17 = 0x1044, PTB18 = 0x1048, PTB19 = 0x104c, PTB20 = 0x1050, PTB21 = 0x1054, PTB22 = 0x1058, PTB23 = 0x105c, PTB24 = 0x1060, PTB25 = 0x1064, PTB26 = 0x1068, PTB27 = 0x106c, PTB28 = 0x1070, PTB29 = 0x1074, PTB30 = 0x1078, PTB31 = 0x107c, PTC0 = 0x2000, PTC1 = 0x2004, PTC2 = 0x2008, PTC3 = 0x200c, PTC4 = 0x2010, PTC5 = 0x2014, PTC6 = 0x2018, PTC7 = 0x201c, PTC8 = 0x2020, PTC9 = 0x2024, PTC10 = 0x2028, PTC11 = 0x202c, PTC12 = 0x2030, PTC13 = 0x2034, PTC14 = 0x2038, PTC15 = 0x203c, PTC16 = 0x2040, PTC17 = 0x2044, PTC18 = 0x2048, PTC19 = 0x204c, PTC20 = 0x2050, PTC21 = 0x2054, PTC22 = 0x2058, PTC23 = 0x205c, PTC24 = 0x2060, PTC25 = 0x2064, PTC26 = 0x2068, PTC27 = 0x206c, PTC28 = 0x2070, PTC29 = 0x2074, PTC30 = 0x2078, PTC31 = 0x207c, PTD0 = 0x3000, PTD1 = 0x3004, PTD2 = 0x3008, PTD3 = 0x300c, PTD4 = 0x3010, PTD5 = 0x3014, PTD6 = 0x3018, PTD7 = 0x301c, PTD8 = 0x3020, PTD9 = 0x3024, PTD10 = 0x3028, PTD11 = 0x302c, PTD12 = 0x3030, PTD13 = 0x3034, PTD14 = 0x3038, PTD15 = 0x303c, PTD16 = 0x3040, PTD17 = 0x3044, PTD18 = 0x3048, PTD19 = 0x304c, PTD20 = 0x3050, PTD21 = 0x3054, PTD22 = 0x3058, PTD23 = 0x305c, PTD24 = 0x3060, PTD25 = 0x3064, PTD26 = 0x3068, PTD27 = 0x306c, PTD28 = 0x3070, PTD29 = 0x3074, PTD30 = 0x3078, PTD31 = 0x307c, PTE0 = 0x4000, PTE1 = 0x4004, PTE2 = 0x4008, PTE3 = 0x400c, PTE4 = 0x4010, PTE5 = 0x4014, PTE6 = 0x4018, PTE7 = 0x401c, PTE8 = 0x4020, PTE9 = 0x4024, PTE10 = 0x4028, PTE11 = 0x402c, PTE12 = 0x4030, PTE13 = 0x4034, PTE14 = 0x4038, PTE15 = 0x403c, PTE16 = 0x4040, PTE17 = 0x4044, PTE18 = 0x4048, PTE19 = 0x404c, PTE20 = 0x4050, PTE21 = 0x4054, PTE22 = 0x4058, PTE23 = 0x405c, PTE24 = 0x4060, PTE25 = 0x4064, PTE26 = 0x4068, PTE27 = 0x406c, PTE28 = 0x4070, PTE29 = 0x4074, PTE30 = 0x4078, PTE31 = 0x407c, LED_RED = PTC3, LED_GREEN = PTD4, LED_BLUE = PTA2, // mbed original LED naming LED1 = LED_RED, LED2 = LED_GREEN, LED3 = LED_BLUE, LED4 = LED_BLUE, // USB Pins USBTX = PTB17, USBRX = PTB16, // Arduino Headers D0 = PTE1, D1 = PTE0, D2 = PTA5, D3 = PTD4, D4 = PTC8, D5 = PTA1, D6 = PTC3, D7 = PTC4, D8 = PTA12, D9 = PTA2, D10 = PTC2, D11 = PTD2, D12 = PTD3, D13 = PTD1, D14 = PTB3, D15 = PTB2, A0 = PTC0, A1 = PTC1, A2 = PTD6, A3 = PTD5, A4 = PTB1, A5 = PTB0, I2C_SCL = D15, I2C_SDA = D14, TSI_ELEC0 = PTB16, TSI_ELEC1 = PTB17, // Not connected NC = (int)0xFFFFFFFF } PinName; typedef enum { PullNone = 0, PullDown = 2, PullUp = 3, PullDefault = PullUp } PinMode; #ifdef __cplusplus } #endif #endif