Mouse code for the MacroRat
Diff: mbed-dev/targets/TARGET_Freescale/TARGET_K20XX/TARGET_K20D50M/PinNames.h
- Revision:
- 18:6a4db94011d3
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-dev/targets/TARGET_Freescale/TARGET_K20XX/TARGET_K20D50M/PinNames.h Sun May 14 23:18:57 2017 +0000 @@ -0,0 +1,256 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2015 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + PIN_INPUT, + PIN_OUTPUT +} PinDirection; + +/* PCR - 0x1000 */ +#define PORT_SHIFT 12 + +typedef enum { + PTA0 = 0x0, + PTA1 = 0x4, + PTA2 = 0x8, + PTA3 = 0xc, + PTA4 = 0x10, + PTA5 = 0x14, + PTA6 = 0x18, + PTA7 = 0x1c, + PTA8 = 0x20, + PTA9 = 0x24, + PTA10 = 0x28, + PTA11 = 0x2c, + PTA12 = 0x30, + PTA13 = 0x34, + PTA14 = 0x38, + PTA15 = 0x3c, + PTA16 = 0x40, + PTA17 = 0x44, + PTA18 = 0x48, + PTA19 = 0x4c, + PTA20 = 0x50, + PTA21 = 0x54, + PTA22 = 0x58, + PTA23 = 0x5c, + PTA24 = 0x60, + PTA25 = 0x64, + PTA26 = 0x68, + PTA27 = 0x6c, + PTA28 = 0x70, + PTA29 = 0x74, + PTA30 = 0x78, + PTA31 = 0x7c, + PTB0 = 0x1000, + PTB1 = 0x1004, + PTB2 = 0x1008, + PTB3 = 0x100c, + PTB4 = 0x1010, + PTB5 = 0x1014, + PTB6 = 0x1018, + PTB7 = 0x101c, + PTB8 = 0x1020, + PTB9 = 0x1024, + PTB10 = 0x1028, + PTB11 = 0x102c, + PTB12 = 0x1030, + PTB13 = 0x1034, + PTB14 = 0x1038, + PTB15 = 0x103c, + PTB16 = 0x1040, + PTB17 = 0x1044, + PTB18 = 0x1048, + PTB19 = 0x104c, + PTB20 = 0x1050, + PTB21 = 0x1054, + PTB22 = 0x1058, + PTB23 = 0x105c, + PTB24 = 0x1060, + PTB25 = 0x1064, + PTB26 = 0x1068, + PTB27 = 0x106c, + PTB28 = 0x1070, + PTB29 = 0x1074, + PTB30 = 0x1078, + PTB31 = 0x107c, + PTC0 = 0x2000, + PTC1 = 0x2004, + PTC2 = 0x2008, + PTC3 = 0x200c, + PTC4 = 0x2010, + PTC5 = 0x2014, + PTC6 = 0x2018, + PTC7 = 0x201c, + PTC8 = 0x2020, + PTC9 = 0x2024, + PTC10 = 0x2028, + PTC11 = 0x202c, + PTC12 = 0x2030, + PTC13 = 0x2034, + PTC14 = 0x2038, + PTC15 = 0x203c, + PTC16 = 0x2040, + PTC17 = 0x2044, + PTC18 = 0x2048, + PTC19 = 0x204c, + PTC20 = 0x2050, + PTC21 = 0x2054, + PTC22 = 0x2058, + PTC23 = 0x205c, + PTC24 = 0x2060, + PTC25 = 0x2064, + PTC26 = 0x2068, + PTC27 = 0x206c, + PTC28 = 0x2070, + PTC29 = 0x2074, + PTC30 = 0x2078, + PTC31 = 0x207c, + PTD0 = 0x3000, + PTD1 = 0x3004, + PTD2 = 0x3008, + PTD3 = 0x300c, + PTD4 = 0x3010, + PTD5 = 0x3014, + PTD6 = 0x3018, + PTD7 = 0x301c, + PTD8 = 0x3020, + PTD9 = 0x3024, + PTD10 = 0x3028, + PTD11 = 0x302c, + PTD12 = 0x3030, + PTD13 = 0x3034, + PTD14 = 0x3038, + PTD15 = 0x303c, + PTD16 = 0x3040, + PTD17 = 0x3044, + PTD18 = 0x3048, + PTD19 = 0x304c, + PTD20 = 0x3050, + PTD21 = 0x3054, + PTD22 = 0x3058, + PTD23 = 0x305c, + PTD24 = 0x3060, + PTD25 = 0x3064, + PTD26 = 0x3068, + PTD27 = 0x306c, + PTD28 = 0x3070, + PTD29 = 0x3074, + PTD30 = 0x3078, + PTD31 = 0x307c, + PTE0 = 0x4000, + PTE1 = 0x4004, + PTE2 = 0x4008, + PTE3 = 0x400c, + PTE4 = 0x4010, + PTE5 = 0x4014, + PTE6 = 0x4018, + PTE7 = 0x401c, + PTE8 = 0x4020, + PTE9 = 0x4024, + PTE10 = 0x4028, + PTE11 = 0x402c, + PTE12 = 0x4030, + PTE13 = 0x4034, + PTE14 = 0x4038, + PTE15 = 0x403c, + PTE16 = 0x4040, + PTE17 = 0x4044, + PTE18 = 0x4048, + PTE19 = 0x404c, + PTE20 = 0x4050, + PTE21 = 0x4054, + PTE22 = 0x4058, + PTE23 = 0x405c, + PTE24 = 0x4060, + PTE25 = 0x4064, + PTE26 = 0x4068, + PTE27 = 0x406c, + PTE28 = 0x4070, + PTE29 = 0x4074, + PTE30 = 0x4078, + PTE31 = 0x407c, + + LED_RED = PTC3, + LED_GREEN = PTD4, + LED_BLUE = PTA2, + + // mbed original LED naming + LED1 = LED_RED, + LED2 = LED_GREEN, + LED3 = LED_BLUE, + LED4 = LED_BLUE, + + // USB Pins + USBTX = PTB17, + USBRX = PTB16, + + // Arduino Headers + D0 = PTE1, + D1 = PTE0, + D2 = PTA5, + D3 = PTD4, + D4 = PTC8, + D5 = PTA1, + D6 = PTC3, + D7 = PTC4, + D8 = PTA12, + D9 = PTA2, + D10 = PTC2, + D11 = PTD2, + D12 = PTD3, + D13 = PTD1, + D14 = PTB3, + D15 = PTB2, + + A0 = PTC0, + A1 = PTC1, + A2 = PTD6, + A3 = PTD5, + A4 = PTB1, + A5 = PTB0, + + I2C_SCL = D15, + I2C_SDA = D14, + + TSI_ELEC0 = PTB16, + TSI_ELEC1 = PTB17, + + // Not connected + NC = (int)0xFFFFFFFF +} PinName; + + +typedef enum { + PullNone = 0, + PullDown = 2, + PullUp = 3, + PullDefault = PullUp +} PinMode; + +#ifdef __cplusplus +} +#endif + +#endif