Mouse code for the MacroRat
mbed-dev/targets/TARGET_Atmel/TARGET_SAM_CortexM4/TARGET_SAMG55J19/PeripheralPins.c
- Committer:
- sahilmgandhi
- Date:
- 2017-05-14
- Revision:
- 18:6a4db94011d3
File content as of revision 18:6a4db94011d3:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include "PeripheralPins.h" /************ADC***************/ const PinMap PinMap_ADC[] = { /* Not connected */ {PA17, ADC_0, NC}, /*NC in mux posiotn since it is a extra function and doesnt have a name*/ {PA18, ADC_1, NC}, /*Pin is multiplexed to the extra function once the corresponding ADC channel is enabled*/ {PA19, ADC_2, NC}, {PA20, ADC_3, NC}, {PB00, ADC_4, NC}, {PB01, ADC_5, NC}, {PB02, ADC_6, NC}, {PB03, ADC_7, NC}, /* Not connected */ {NC , NC , NC} }; /************UART***************/ const PinMap PinMap_UART_TX[] = { {PA03, UART_3, 0}, {PA06, UART_2, 0}, {PA10, UART_0, 0}, {PA13, UART_5, 0}, {PA28, UART_7, 1}, {PB00, UART_6, 1}, {PB03, UART_1, 0}, {PB08, UART_4, 0}, {PB10, UART_4, 0}, {PB10, UART_6, 1}, /* Not connected */ {NC , NC , NC} }; const PinMap PinMap_UART_RX[] = { {PA04, UART_3, 0}, {PA05, UART_2, 0}, {PA09, UART_0, 0}, {PA12, UART_5, 0}, {PA27, UART_7, 1}, {PB01, UART_6, 1}, {PB02, UART_1, 0}, {PB09, UART_4, 0}, {PB11, UART_4, 0}, {PB11, UART_6, 1}, /* Not connected */ {NC , NC , NC} }; const PinMap PinMap_UART_CTS[] = { {PA11, UART_5, 0}, {PA16, UART_2, 0}, {PA25, UART_0, 0}, {PA28, UART_1, 0}, {PA30, UART_7, 1}, {PB08, UART_4, 1}, {PB14, UART_3, 0}, {PB14, UART_6, 1}, /* Not connected */ {NC , NC , NC} }; const PinMap PinMap_UART_RTS[] = { {PA15, UART_2, 0}, {PA26, UART_0, 0}, {PA29, UART_1, 0}, {PA31, UART_7, 1}, {PB02, UART_5, 1}, {PB09, UART_4, 1}, {PB15, UART_3, 0}, {PB15, UART_6, 1}, /* Not connected */ {NC , NC , NC} }; /************SPI***************/ const PinMap PinMap_SPI_SCLK[] = { {PB00, (int)SPI0, 0}, {PA27, (int)SPI1, 0}, {PA15, (int)SPI2, 1}, {PA24, (int)SPI2, 1}, {PB13, (int)SPI3, 0}, {PB01, (int)SPI4, 0}, {PA14, (int)SPI5, 0}, {PB13, (int)SPI6, 1}, {PA29, (int)SPI7, 1}, /* Not connected */ {NC , (int)NC , NC} }; const PinMap PinMap_SPI_MOSI[] = { {PA10, (int)SPI0, 0}, {PB03, (int)SPI1, 0}, {PA06, (int)SPI2, 0}, {PA03, (int)SPI3, 0}, {PB08, (int)SPI4, 0}, {PB10, (int)SPI4, 0}, {PA13, (int)SPI5, 0}, {PB00, (int)SPI6, 1}, {PB10, (int)SPI6, 1}, {PA28, (int)SPI7, 1}, /* Not connected */ {NC , (int)NC , NC} }; const PinMap PinMap_SPI_MISO[] = { {PA09, (int)SPI0, 0}, {PB02, (int)SPI1, 0}, {PA05, (int)SPI2, 0}, {PA04, (int)SPI3, 0}, {PB09, (int)SPI4, 0}, {PB11, (int)SPI4, 0}, {PA12, (int)SPI5, 0}, {PB01, (int)SPI6, 1}, {PB11, (int)SPI6, 1}, {PA27, (int)SPI7, 1}, /* Not connected */ {NC , (int)NC , NC} }; /************I2C***************/ const PinMap PinMap_I2C_SDA[] = { {PA10, (int)TWI0, 0}, {PB03, (int)TWI1, 0}, {PA06, (int)TWI2, 0}, {PA03, (int)TWI3, 0}, {PB08, (int)TWI4, 0}, {PB10, (int)TWI4, 0}, {PB10, (int)TWI6, 1}, {PA13, (int)TWI5, 0}, {PB00, (int)TWI6, 1}, {PB10, (int)TWI6, 1}, {PA28, (int)TWI7, 1}, /* Not connected */ {NC , NC , NC} }; const PinMap PinMap_I2C_SCL[] = { {PA09, (int)TWI0, 0}, {PB02, (int)TWI1, 0}, {PA05, (int)TWI2, 0}, {PA04, (int)TWI3, 0}, {PB09, (int)TWI4, 0}, {PB11, (int)TWI4, 0}, {PA12, (int)TWI5, 0}, {PB01, (int)TWI6, 1}, {PB11, (int)TWI6, 1}, {PA27, (int)TWI7, 1}, /* Not connected */ {NC , NC , NC} }; /************PWM***************/ const PinMap PinMap_PWM[] = { {PA00, (int)TC0, 1}, {PA23, (int)TC0, 1}, {PA21, (int)TC0, 0}, {PA01, (int)TC0, 1}, {PA16, (int)TC0, 1}, {PA22, (int)TC0, 0}, /* Not connected */ {NC , NC , NC} }; /************PWM***************/ const PinMap PinMap_PWM_IO_Line[] = { {PA00, 0, 0}, {PA23, 1, 0}, {PA21, 2, 0}, {PA01, 0, 1}, {PA16, 1, 1}, {PA22, 2, 1}, /* Not connected */ {NC , NC , NC} };