Diff: mbed-dev/targets/TARGET_ONSEMI/TARGET_NCS36510/gpio.h

Revision:

18:6a4db94011d3

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-dev/targets/TARGET_ONSEMI/TARGET_NCS36510/gpio.h	Sun May 14 23:18:57 2017 +0000
@@ -0,0 +1,86 @@
+/**
+ ******************************************************************************
+ * @file gpio.h
+ * @brief (API) Public header of GPIO driver
+ * @internal
+ * @author   ON Semiconductor
+ * $Rev: 3724 $
+ * $Date: 2015-09-14 14:35:42 +0530 (Mon, 14 Sep 2015) $
+ ******************************************************************************
+ * Copyright 2016 Semiconductor Components Industries LLC (d/b/a “ON Semiconductor”).
+ * All rights reserved.  This software and/or documentation is licensed by ON Semiconductor
+ * under limited terms and conditions.  The terms and conditions pertaining to the software
+ * and/or documentation are available at http://www.onsemi.com/site/pdf/ONSEMI_T&C.pdf
+ * (“ON Semiconductor Standard Terms and Conditions of Sale, Section 8 Software”) and
+ * if applicable the software license agreement.  Do not use this software and/or
+ * documentation unless you have carefully read and you agree to the limited terms and
+ * conditions.  By using this software and/or documentation, you agree to the limited
+ * terms and conditions.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ON SEMICONDUCTOR SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL,
+ * INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ * @endinternal
+ *
+ * @ingroup gpio
+ *
+ * @details
+ *
+ * <h1> General description </h1>
+ * <p>
+ * The APB GPIO is a configurable module allowing the use of 14 I/O lines.
+ * Each line can be configured independently.
+ * The GPIO module supports a wide variety of features concerning interrupts,
+ * which can be triggered by a low level, high level, positive or negative edge,
+ * or both edges.
+ * </p>
+ *
+ */
+
+#ifndef GPIO_H_
+#define GPIO_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "memory_map.h"
+#include "gpio_map.h"
+#include "pad_map.h"
+#include "crossbar.h"
+#include "clock.h"
+#include "pad.h"
+
+
+/** output configuration push/pull */
+#define PAD_OUTCFG_PUSHPULL                    (uint8_t)0x00
+
+/** output configuration open drain */
+#define PAD_OOUTCFG_OPENDRAIN                  (uint8_t)0x01
+
+/** no pull up nor pull down */
+#define PAD_PULL_NONE                          (uint8_t)0x01
+
+/** pull down */
+#define PAD_PULL_DOWN                          (uint8_t)0x00
+
+/** pull up */
+#define PAD_PULL_UP                            (uint8_t)0x03
+
+/* Number of DIO lines supported by NCS36510 */
+#define NUMBER_OF_GPIO        ((uint8_t)0x12)
+
+/* All DIO lines set to 1 */
+#define IO_ALL                ((uint32_t)0x3FFFF)
+#define IO_NONE               ((uint32_t)0x00000)
+
+/* Gpio handler */
+void fGpioHandler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* GPIO_H_ */