MacroRat
Mouse code for the MacroRat
Diff: mbed-dev/targets/TARGET_ONSEMI/TARGET_NCS36510/device/NCS36510.h
- Revision:
- 18:6a4db94011d3
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-dev/targets/TARGET_ONSEMI/TARGET_NCS36510/device/NCS36510.h Sun May 14 23:18:57 2017 +0000
@@ -0,0 +1,91 @@
+/**************************************************************************/
+/**
+ * @file NCS36510.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * for CM3 Device Series
+ * @version V1.05
+ * @date 26. July 2011
+ *
+ * @note
+ * Copyright (C) 2010-2011 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+#ifndef ARMCM3_H
+#define ARMCM3_H
+
+/**
+ * ==========================================================================
+ * ---------- Interrupt Number Definition -----------------------------------
+ * ==========================================================================
+ */
+typedef enum IRQn {
+ /****** Cortex-M3 Processor Exceptions Numbers ***************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Cortex-M3 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M3 Hard Fault Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */
+
+ /****** ARMCM3 specific Interrupt Numbers ********************************************************/
+ Tim0_IRQn = 0,
+ Tim1_IRQn = 1,
+ Tim2_IRQn = 2,
+ Uart1_IRQn = 3,
+ Spi_IRQn = 4,
+ I2C_IRQn = 5,
+ Gpio_IRQn = 6,
+ Rtc_IRQn = 7,
+ Flash_IRQn = 8,
+ MacHw_IRQn = 9,
+ Aes_IRQn = 10,
+ Adc_IRQn = 11,
+ ClockCal_IRQn = 12,
+ Uart2_IRQn = 13,
+ Uvi_IRQn = 14,
+ Dma_IRQn = 15,
+ DbgPwrUp_IRQn = 16,
+ Spi2_IRQn = 17,
+ I2C2_IRQn = 18,
+ FVDDHComp_IRQn = 19
+} IRQn_Type;
+
+/**
+ * ==========================================================================
+ * ----------- Processor and Core Peripheral Section ------------------------
+ * ==========================================================================
+ */
+
+/** Configuration of the Cortex-M3 Processor and Core Peripherals */
+#define __CM3_REV 0x0201 /*!< Core Revision r2p1 */
+#define __MPU_PRESENT 1 /*!< MPU present or not */
+#define __NVIC_PRIO_BITS 4 /*!< Number of Bits used for Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+//#define YOTTA_CFG_CMSIS_NVIC_USER_IRQ_OFFSET 16
+//#define YOTTA_CFG_CMSIS_NVIC_USER_IRQ_NUMBER 20
+//#define NVIC_NUM_VECTORS (NVIC_USER_IRQ_OFFSET + NVIC_USER_IRQ_NUMBER)
+
+//#define YOTTA_CFG_CMSIS_NVIC_RAM_VECTOR_ADDRESS
+//#define YOTTA_CFG_CMSIS_NVIC_FLASH_VECTOR_ADDRESS 0x3000
+
+#include <core_cm3.h> /* Cortex-M3 processor and core peripherals */
+#include "system_NCS36510.h" /* System Header */
+
+#endif /* ARMCM3_H */