Mouse code for the MacroRat
Diff: mbed-dev/targets/TARGET_Atmel/TARGET_SAM_CortexM0P/TARGET_SAMR21G18A/PeripheralNames.h
- Revision:
- 18:6a4db94011d3
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-dev/targets/TARGET_Atmel/TARGET_SAM_CortexM0P/TARGET_SAMR21G18A/PeripheralNames.h Sun May 14 23:18:57 2017 +0000 @@ -0,0 +1,144 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2015 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PERIPHERALNAMES_H +#define MBED_PERIPHERALNAMES_H + +#include <compiler.h> +#include "cmsis.h" +#include "PinNames.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define _SERCOM_SPI_NAME(n, unused) \ + SPI##n, + +#define _SERCOM_PAD_NAME(n, pad) \ + SERCOM##n##_PAD##pad = ((n & 0xF) | ((pad & 0xF) << 4)), + +#define _SERCOM_I2C_NAME(n, unused) \ + I2C##n, + + + +typedef enum { + UART_0 = (int)0x42000800UL, // Base address of SERCOM0 + UART_1 = (int)0x42000C00UL, // Base address of SERCOM1 + UART_2 = (int)0x42001000UL, // Base address of SERCOM2 + UART_3 = (int)0x42001400UL, // Base address of SERCOM3 + UART_4 = (int)0x42001800UL, // Base address of SERCOM4 + UART_5 = (int)0x42001C00UL // Base address of SERCOM5 +} UARTName; + +typedef enum { // for each input control mux 4,5,6,7,16,17,10,11 used in R21 + ADC_2 = 0x2ul, + ADC_3 = 0x3ul, + ADC_4 = 0x4ul, + ADC_5 = 0x5ul, + ADC_6 = 0x6ul, + ADC_7 = 0x7ul, + ADC_8 = 0x8ul, + ADC_10 = 0xAul, + ADC_11 = 0xBul, + ADC_16 = 0x10ul, + ADC_17 = 0x11ul, + ADC_18 = 0x12ul, + ADC_19 = 0x13ul +} ADCName; + +typedef enum { // for each channel + EXTINT_0 = 0, + EXTINT_1, + EXTINT_2, + EXTINT_3, + EXTINT_4, + EXTINT_5, + EXTINT_6, + EXTINT_7, + EXTINT_8, + EXTINT_9, + EXTINT_10, + EXTINT_11, + EXTINT_12, + EXTINT_13, + EXTINT_14, + EXTINT_15 +} EXTINTName; + +typedef enum { + MREPEAT(SERCOM_INST_NUM, _SERCOM_SPI_NAME, ~) +} SPIName; + +typedef enum { + MREPEAT(SERCOM_INST_NUM, _SERCOM_I2C_NAME, ~) +} I2CName; + +typedef enum { + /* Pad 0 definitions */ + MREPEAT(SERCOM_INST_NUM, _SERCOM_PAD_NAME, 0) + + /* Pad 1 definitions */ + MREPEAT(SERCOM_INST_NUM, _SERCOM_PAD_NAME, 1) + + /* Pad 2 definitions */ + MREPEAT(SERCOM_INST_NUM, _SERCOM_PAD_NAME, 2) + + /* Pad 3 definitions */ + MREPEAT(SERCOM_INST_NUM, _SERCOM_PAD_NAME, 3) +} SercomPadName; + +typedef enum { + PWM_0 = (0x42002000UL), /**< \brief (TCC0) APB Base Address */ + PWM_1 = (0x42002400UL), /**< \brief (TCC1) APB Base Address */ + PWM_2 = (0x42002800UL), /**< \brief (TCC2) APB Base Address */ +} PWMName; + +struct pwm_pin_channel { + PinName pin; + PWMName pwm; + uint8_t channel_index; +}; + +#define STDIO_UART_TX USBTX +#define STDIO_UART_RX USBRX +#define STDIO_UART UART_0 + +// Default peripherals +#define MBED_SPI0 PB22, PB02, PB23, PA14 + +#define MBED_UART0 PA04, PA05 +#define MBED_UARTUSB USBTX, USBRX + +#define MBED_I2C0 PA16, PA17 + +#define MBED_ANALOGIN0 PA04 +#define MBED_ANALOGIN1 PA05 +#define MBED_ANALOGIN2 PA06 +#define MBED_ANALOGIN3 PA07 +#define MBED_ANALOGIN4 PB02 +#define MBED_ANALOGIN5 PB03 +#define MBED_ANALOGIN7 PA08 +#define MBED_ANALOGIN8 PA09 + +#define MBED_PWMOUT0 PA18 +#define MBED_PWMOUT1 PA19 + +#ifdef __cplusplus +} +#endif + +#endif