Diff: EncoderMspInitF7.cpp

Revision:

5:a3349f37ef99

Child:

6:978bd0579f1b

diff -r 9ce0e451aeff -r a3349f37ef99 EncoderMspInitF7.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/EncoderMspInitF7.cpp	Thu Jan 17 05:20:49 2019 +0000
@@ -0,0 +1,110 @@
+#include "mbed.h"
+/*
+ * HAL_TIM_Encoder_MspInit()
+ * Overrides the __weak function stub in stm32f4xx_hal_tim.h
+ *
+ * Edit the below for your preferred pin wiring & pullup/down
+ * I have encoder common at 3V3, using GPIO_PULLDOWN on inputs.
+ * Encoder A&B outputs connected directly to GPIOs.
+ *
+ * www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/DM00102166.pdf
+ * www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/DM00141306.pdf
+ *
+ * TIM1_CH1: AF1 @ PA_8, PE_9 
+ * TIM1_CH2: AF1 @ PA_9, PE_11 
+ *
+ * TIM2_CH1: AF1 @ PA_0, PA_5, PA_15, PB_8*     *F446 only
+ * TIM2_CH2: AF1 @ PA_1, PB_3, PB_9*            *F446 only
+ *
+ * TIM3_CH1: AF2 @ PA_6, PB_4, PC_6
+ * TIM3_CH2: AF2 @ PA_7, PB_5, PC_7
+ *
+ * TIM4_CH1: AF2 @ PB_6, PD_12
+ * TIM4_CH2: AF2 @ PB_7, PD_13
+ *
+ * TIM5_CH1: AF2 @ PA_0*    *TIM5 used by mbed system ticker so unavailable
+ * TIM5_CH2: AF2 @ PA_1*
+ *
+ */
+
+#ifdef TARGET_STM32F7
+void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim)
+{
+    GPIO_InitTypeDef GPIO_InitStruct;
+
+    if (htim->Instance == TIM1) { //PE_9 PE_11
+        __TIM1_CLK_ENABLE();
+        __GPIOE_CLK_ENABLE();
+        GPIO_InitStruct.Pin = GPIO_PIN_9 | GPIO_PIN_11;
+        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+        GPIO_InitStruct.Pull = GPIO_PULLDOWN;
+        GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+        GPIO_InitStruct.Alternate = GPIO_AF1_TIM1;
+        HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+    }
+    else if (htim->Instance == TIM2) { //PA_0 PA_1
+        __TIM2_CLK_ENABLE();
+        __GPIOA_CLK_ENABLE();
+        GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1;
+        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+        GPIO_InitStruct.Pull = GPIO_NOPULL;
+        GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+        GPIO_InitStruct.Alternate = GPIO_AF1_TIM2;
+        HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+    }
+    else if (htim->Instance == TIM3) { //PB_4 PB_5
+        __TIM3_CLK_ENABLE();
+        __GPIOB_CLK_ENABLE();
+        GPIO_InitStruct.Pin = GPIO_PIN_4 | GPIO_PIN_5;
+        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+        GPIO_InitStruct.Pull = GPIO_NOPULL;
+        GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+        GPIO_InitStruct.Alternate = GPIO_AF2_TIM3;
+        HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+    }
+    else if (htim->Instance == TIM4) { // PD_12 PD_13
+        __TIM4_CLK_ENABLE();
+        __GPIOD_CLK_ENABLE();
+        GPIO_InitStruct.Pin = GPIO_PIN_12 | GPIO_PIN_13;
+        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+        GPIO_InitStruct.Pull = GPIO_NOPULL;
+        GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+        GPIO_InitStruct.Alternate = GPIO_AF2_TIM4;
+        HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+    }
+    
+    else if (htim->Instance == TIM8) { // PC_6 PC_7
+        __TIM8_CLK_ENABLE();
+        __GPIOC_CLK_ENABLE();
+        GPIO_InitStruct.Pin = GPIO_PIN_6 | GPIO_PIN_7;
+        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+        GPIO_InitStruct.Pull = GPIO_NOPULL;
+        GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+        GPIO_InitStruct.Alternate = GPIO_AF3_TIM8;
+        HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+    }
+    
+    else if (htim->Instance == TIM9) { // PE_5 PE_6
+        __TIM9_CLK_ENABLE();
+        __GPIOE_CLK_ENABLE();
+        GPIO_InitStruct.Pin = GPIO_PIN_5 | GPIO_PIN_6;
+        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+        GPIO_InitStruct.Pull = GPIO_NOPULL;
+        GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+        GPIO_InitStruct.Alternate = GPIO_AF3_TIM9;
+        HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
+    }
+    
+    else if (htim->Instance == TIM12) { // PB_14 PB_15
+        __TIM12_CLK_ENABLE();
+        __GPIOB_CLK_ENABLE();
+        GPIO_InitStruct.Pin = GPIO_PIN_14 | GPIO_PIN_15;
+        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+        GPIO_InitStruct.Pull = GPIO_NOPULL;
+        GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+        GPIO_InitStruct.Alternate = GPIO_AF9_TIM12;
+        HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
+    }
+    
+}
+#endif
\ No newline at end of file