Building an IFTTT Mbed Application¶

This tutorial will guide you through creating an IFTTT Mbed application for the Mbed Connect Cloud board.

Prerequisites¶

• An Mbed account - sign up here
• Install the Mbed serial driver (for Windows PCs)'
• An IFTTT Maker account - sign up here

Required Hardware¶

• Mbed Connect Cloud board
• An active WiFi network

Setup¶

1. Connect the board to your computer via the micro USB port.
2. The board mounts as a mass-storage device (like a USB drive). Verify that you can see it (the drive name will be DAPLINK).
3. Add the u-blox EVK-ODIN-W2 board to your online Mbed Compiler here

Making the Mbed application¶

Import the example program.

Printing to the screen¶

Open main.cpp

Instantiate a C12832 variable to write to the LCD screen on the board. Under 'GLOBAL VARIABLES HERE' add the following code:

C12832  lcd(PE_14, PE_12, PD_12, PD_11, PE_9);

Create a function to print to the LCD screen. Under 'FUNCTION DEFINITIONS HERE' add the following code:

void lcd_print(const char* message) {
    lcd.cls();
    lcd.locate(0, 3);
    lcd.printf(message);
}

Setting up WiFi¶

We will add some code to initialize the Mbed Connect Cloud board's WiFi module and connect to your local WPA/WPA2 WiFi network.

Open mbed_app.json

We need to tell Mbed the name of our WiFi network's SSID and password.

Under wifi-ssid change the "value" from SSID to your WiFi's name (for example: "\"iotlab\"") and do not remove the quotes.

Under wifi-password change the "value" from PASSWORD to your WiFi's password (for example: "\"abcd1234\"") and do not remove the quotes.

Open main.cpp

The Mbed Connect Cloud board uses the u-blox EVK-ODIN-W2 WiFi module. So to initialize our WiFi connection we need to instantiate a OdinWifiInterface variable. Under 'GLOBAL VARIABLES HERE' add the following code:

OdinWiFiInterface wifi;

Add some code to tell the WiFi module to connect to your wifi network. We will also print to the LCD the status of the WiFi connection. Under 'MAIN CODE HERE' add the following code:

lcd_print("Connecting...");
int ret = wifi.connect(MBED_CONF_APP_WIFI_SSID, MBED_CONF_APP_WIFI_PASSWORD, NSAPI_SECURITY_WPA_WPA2);
if (ret != 0) {
    lcd_print("Connection error.");
    return -1;
}
lcd_print("Successfully connected!");

The MBED_CONF_APP_WIFI_SSID and MBED_CONF_APP_WIFI_PASSWORD are variables defined by the mbed_app.json file we edited previously. NSAPI_SECURITY_WPA_WPA2 tells Mbed OS that our WiFi network has WPA or WPA2 security (so it requires an SSID and password).

Adding a button interrupt¶

We will add some code to instantiate an InterruptIn variable so the SW1 button on the board can interrupt the main program. We will also create an int variable to store the number of times the button has been clicked, and a bool variable that changes state (true/false) whenever the button is clicked. We will also print the number of times the button has been clicked to the board's LCD screen.

Open main.cpp

To keep track of the number of times the button has been pressed, we need an integer variable and a boolean variable. Under 'GLOBAL VARIABLES HERE' add the following code:

InterruptIn button(PF_2);
volatile int count = 0;
volatile bool clicked = false;

Add a function that will be called when the button interrupts the main function. When the button is clicked, the clicked variable will be set to true and the count will be incremented by one. The number of clicks will also be printed to the LCD screen. Under 'FUNCTION DEFINITIONS HERE' add the following code:

void button_clicked() {
    clicked = true;
    count += 1;
    char val[32];
    sprintf(val, "# of clicks = %d", count);
    lcd_print(val);
}

Attach the button_clicked function to the rising edge of the InterruptIn button. We will also add a while loop so the program will run indefinitely. Under 'MAIN CODE HERE' add the following code:

button.rise(&button_clicked);
while (true) {
    // WHILE LOOP CODE HERE

}

Compile and run¶

1. Select the u-blox EVK-ODIN-W2 target board in the upper right hand corner
2. Press "Compile"
3. Wait for a binary to be downloaded
4. Drag the binary to the DAPLINK disk
5. Press the board's reset button
6. The WiFi connection status should now be displaying on the board, once you see "Successfully connected!" you can press the button and see the number of button clicks on the LCD screen.

Creating an IFTTT applet¶

POST to your IFTTT applet¶

Open main.cpp

Under 'MAIN CODE HERE' add the following code:

Compile and run¶

1. Select the u-blox EVK-ODIN-W2 target board in the upper right hand corner
2. Press "Compile"
3. Wait for a binary to be downloaded
4. Drag the binary to the DAPLINK disk
5. Press the board's reset button
6. The WiFi connection status should now be displaying on the board, once you see "Successfully connected!" you can press the button and see the number of button clicks on the LCD screen.
7. You should also be able to see the number of button clicks in your Google Sheets document that was created by your IFTTT applet. It should look similar to the screenshot below.