local copy of sx1276 library

Dependents:   SX1276_GPS demo_SX1276_standalone

Fork of SX1276Lib by Gregory Cristian

Revision:
17:20ce6dab2237
Parent:
16:29f09ac61412
--- a/sx1276/sx1276.cpp	Tue Jun 16 11:52:30 2015 +0000
+++ b/sx1276/sx1276.cpp	Thu Sep 03 14:33:00 2015 +0000
@@ -182,9 +182,10 @@
                   RFLR_IRQFLAGS_PAYLOADCRCERROR |
                   RFLR_IRQFLAGS_VALIDHEADER |
                   RFLR_IRQFLAGS_TXDONE |
-                  RFLR_IRQFLAGS_CADDONE |
-                  RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL |
-                  RFLR_IRQFLAGS_CADDETECTED );
+                  //RFLR_IRQFLAGS_CADDONE |
+                  RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL// |
+                  //RFLR_IRQFLAGS_CADDETECTED
+                   );
 
     // Set radio in continuous reception
     SetOpMode( RF_OPMODE_RECEIVER );
@@ -781,10 +782,11 @@
                                               //RFLR_IRQFLAGS_RXDONE |
                                               //RFLR_IRQFLAGS_PAYLOADCRCERROR |
                                               RFLR_IRQFLAGS_VALIDHEADER |
-                                              RFLR_IRQFLAGS_TXDONE |
-                                              RFLR_IRQFLAGS_CADDONE |
+                                              RFLR_IRQFLAGS_TXDONE // |
+                                              //x RFLR_IRQFLAGS_CADDONE |
                                               //RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL |
-                                              RFLR_IRQFLAGS_CADDETECTED );
+                                              //x RFLR_IRQFLAGS_CADDETECTED 
+                                              );
                                               
                 // DIO0=RxDone, DIO2=FhssChangeChannel
                 Write( REG_DIOMAPPING1, ( Read( REG_DIOMAPPING1 ) & RFLR_DIOMAPPING1_DIO0_MASK & RFLR_DIOMAPPING1_DIO2_MASK  ) | RFLR_DIOMAPPING1_DIO0_00 | RFLR_DIOMAPPING1_DIO2_00 );
@@ -796,14 +798,15 @@
                                               //RFLR_IRQFLAGS_PAYLOADCRCERROR |
                                               RFLR_IRQFLAGS_VALIDHEADER |
                                               RFLR_IRQFLAGS_TXDONE |
-                                              RFLR_IRQFLAGS_CADDONE |
-                                              RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL |
-                                              RFLR_IRQFLAGS_CADDETECTED );
+                                           //   RFLR_IRQFLAGS_CADDONE |
+                                              RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL //|
+                                           //   RFLR_IRQFLAGS_CADDETECTED
+                                            );
                                               
                 // DIO0=RxDone
                 Write( REG_DIOMAPPING1, ( Read( REG_DIOMAPPING1 ) & RFLR_DIOMAPPING1_DIO0_MASK ) | RFLR_DIOMAPPING1_DIO0_00 );
             }
-            
+           
             Write( REG_LR_FIFORXBASEADDR, 0 );
             Write( REG_LR_FIFOADDRPTR, 0 );
         }
@@ -926,7 +929,7 @@
                                         RFLR_IRQFLAGS_VALIDHEADER |
                                         RFLR_IRQFLAGS_TXDONE |
                                         //RFLR_IRQFLAGS_CADDONE |
-                                        RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL // |
+                                        RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL  //|
                                         //RFLR_IRQFLAGS_CADDETECTED 
                                         );
                                           
@@ -1078,6 +1081,7 @@
 {
     __IO uint8_t irqFlags = 0;
   
+    //printf("radfta dio0irq\r\n");
     switch( this->settings.State )
     {                
         case RX:
@@ -1292,6 +1296,7 @@
 
 void SX1276::OnDio1Irq( void )
 {
+       printf("ondio1 irq\r\n");
     switch( this->settings.State )
     {                
         case RX:
@@ -1366,6 +1371,7 @@
 
 void SX1276::OnDio2Irq( void )
 {
+    //   printf("ondio2 irq\r\n");
     switch( this->settings.State )
     {                
         case RX:
@@ -1430,6 +1436,7 @@
 
 void SX1276::OnDio3Irq( void )
 {
+  //  printf("dio3 irq\r\n");
     switch( this->settings.Modem )
     {
     case MODEM_FSK:
@@ -1438,15 +1445,18 @@
         if( ( Read( REG_LR_IRQFLAGS ) & 0x01 ) == 0x01 )
         {
             // Clear Irq
+            // printf("clear cad irq 1\r\n");
             Write( REG_LR_IRQFLAGS, RFLR_IRQFLAGS_CADDETECTED_MASK | RFLR_IRQFLAGS_CADDONE);
             if( ( cadDone != NULL ) )
             {
+                printf("call caddone with true");
                 cadDone( true );
             }
         }
         else
         {        
             // Clear Irq
+            // printf("clear cad irq 2 \r\n");
             Write( REG_LR_IRQFLAGS, RFLR_IRQFLAGS_CADDONE );
             if( ( cadDone != NULL ) )
             {
@@ -1480,6 +1490,7 @@
 
 void SX1276::OnDio5Irq( void )
 {
+   // printf("radfta dio5 irq\r\n");
     switch( this->settings.Modem )
     {
     case MODEM_FSK: