Diff: Report.txt

Revision:

2:d457aead43f6

Parent:

1:5192dafaecad

Child:

3:9956186744f0

diff -r 5192dafaecad -r d457aead43f6 Report.txt
--- a/Report.txt	Thu Feb 01 20:58:09 2018 +0000
+++ b/Report.txt	Fri Feb 09 17:18:15 2018 +0000
@@ -3,7 +3,9 @@
 Samantha Smith sks1 
 
 Results
-
+In this lab, we created a low pass filter using the given equation and a cutoff frequency of 200 Hz. We chose to use a 0.1 uF capacitor and, using the equation, calculated that we should 
+use a resistor value of about 8200 ohms. We were then able to connect the low pass filter onthe breadboard and generate a sinewave of 100 Hz with an 
+amplitude of 1 V. When stepping the sinewave frequency by 10 Hz each time, we were about the see that the blue wave became smaller as the frequency increased.
 
 Difficulties
 During the process of manipulating the sinewave example code, we ran into quite a few problems with the frequency of the wave.