Diff: Report.txt

Revision:

1:5192dafaecad

Child:

2:d457aead43f6

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Report.txt	Thu Feb 01 20:58:09 2018 +0000
@@ -0,0 +1,23 @@
+Lab 3 Lab report
+David Malone davmalon   
+Samantha Smith sks1 
+
+Results
+
+
+Difficulties
+During the process of manipulating the sinewave example code, we ran into quite a few problems with the frequency of the wave. 
+We were slightly confused initially on how to convert the period into frequency with the wait_us() function. 
+Eventually we had realized that the function operated in miliseconds and the frequency we were giving the function was actually a delay of 1ooms and not 100hz/samples per second. 
+To achive the actual frequency, one only has to divide the input frequency by 10 and pass that number to the wait_us function. 
+We also had an issue with how we originally connected our circuit which caused a few problems. One issue that stemmed from this was that we chose a capacitor with a high capacitance that disrupted the form of our sinewave. 
+We simply chose another capacitor, at .1 microferrats. and this fixed our problem (we swapped out the resistor to reflect this change in our circuit for our freuency cutoff value). 
+
+
+
+How closely did your analysis match your measurements. What were the reasons for the differences? 
+
+Filter Ideal Analysis 
+
+
+Filter Measurements
\ No newline at end of file