File content as of revision 0:478cfd88041f:

/**
******************************************************************************
* @file    platform/stm32nucleo-spirit1/contiki-conf.h
* @author  System LAB 
* @version V1.0.0
* @date    17-May-2015
* @brief   Contiki configuration parameters
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*   1. Redistributions of source code must retain the above copyright notice,
*      this list of conditions and the following disclaimer.
*   2. Redistributions in binary form must reproduce the above copyright notice,
*      this list of conditions and the following disclaimer in the documentation
*      and/or other materials provided with the distribution.
*   3. Neither the name of STMicroelectronics nor the names of its contributors
*      may be used to endorse or promote products derived from this software
*      without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/*---------------------------------------------------------------------------*/
#ifndef __CONTIKI_CONF_H__
#define __CONTIKI_CONF_H__
/*---------------------------------------------------------------------------*/
#include "platform-conf.h"
//#include "project-conf.h"
/*---------------------------------------------------------------------------*/
#define SLIP_BRIDGE_CONF_NO_PUTCHAR 1

#define NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE 8
#define NULLRDC_CONF_802154_AUTOACK 0
#define NETSTACK_CONF_FRAMER  framer_802154
#define NETSTACK_CONF_NETWORK sicslowpan_driver

#undef NETSTACK_CONF_RDC
#define NETSTACK_CONF_RDC     nullrdc_driver
#define NETSTACK_RDC_HEADER_LEN 0

#undef NETSTACK_CONF_MAC
#define NETSTACK_CONF_MAC csma_driver
#define NETSTACK_MAC_HEADER_LEN 0

#define SICSLOWPAN_CONF_MAC_MAX_PAYLOAD \
  (NETSTACK_RADIO_MAX_PAYLOAD_LEN - NETSTACK_MAC_HEADER_LEN - \
   NETSTACK_RDC_HEADER_LEN )

#define RIMESTATS_CONF_ENABLED                 0
#define RIMESTATS_CONF_ON                      0


/* Network setup for IPv6 */

#define CXMAC_CONF_ANNOUNCEMENTS         0


/* A trick to resolve a compilation error with IAR. */
#ifdef __ICCARM__
#define UIP_CONF_DS6_AADDR_NBU              1
#endif

/* radio driver blocks until ACK is received */
#define NULLRDC_CONF_ACK_WAIT_TIME          (0)
#define CONTIKIMAC_CONF_BROADCAST_RATE_LIMIT 0
#define IEEE802154_CONF_PANID       0xABCD

#define AODV_COMPLIANCE

#define WITH_ASCII 1

#define PROCESS_CONF_NUMEVENTS 8
#define PROCESS_CONF_STATS 1
/*#define PROCESS_CONF_FASTPOLL    4*/


#define LINKADDR_CONF_SIZE              8

#define UIP_CONF_LL_802154              1
#define UIP_CONF_LLH_LEN                0

#define UIP_CONF_ROUTER                 1

/* configure number of neighbors and routes */
#ifndef UIP_CONF_DS6_ROUTE_NBU
#define UIP_CONF_DS6_ROUTE_NBU   30
#endif /* UIP_CONF_DS6_ROUTE_NBU */

#ifndef UIP_CONF_ND6_SEND_RA
#define UIP_CONF_ND6_SEND_RA    0
#endif
#define UIP_CONF_ND6_REACHABLE_TIME    600000 //90000// 600000 
#define UIP_CONF_ND6_RETRANS_TIMER      10000


#define UIP_CONF_IPV6                   1
#ifndef UIP_CONF_IPV6_QUEUE_PKT
#define UIP_CONF_IPV6_QUEUE_PKT         0
#endif /* UIP_CONF_IPV6_QUEUE_PKT */
#define UIP_CONF_IP_FORWARD             0
#ifndef UIP_CONF_BUFFER_SIZE
//#define UIP_CONF_BUFFER_SIZE    280
#define UIP_CONF_BUFFER_SIZE    600
#endif

#define SICSLOWPAN_CONF_MAXAGE                  4
#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS       2


#ifndef SICSLOWPAN_CONF_MAX_MAC_TRANSMISSIONS
#define SICSLOWPAN_CONF_MAX_MAC_TRANSMISSIONS   5
#endif /* SICSLOWPAN_CONF_MAX_MAC_TRANSMISSIONS */

#define UIP_CONF_ICMP_DEST_UNREACH 1

#define UIP_CONF_DHCP_LIGHT
#define UIP_CONF_LLH_LEN         0
#ifndef UIP_CONF_RECEIVE_WINDOW
#define UIP_CONF_RECEIVE_WINDOW  150
#endif
#ifndef UIP_CONF_TCP_MSS
#define UIP_CONF_TCP_MSS         UIP_CONF_RECEIVE_WINDOW
#endif
#define UIP_CONF_MAX_CONNECTIONS 4
#define UIP_CONF_MAX_LISTENPORTS 8
#define UIP_CONF_UDP_CONNS       12
#define UIP_CONF_FWCACHE_SIZE    30
#define UIP_CONF_BROADCAST       1
#define UIP_ARCH_IPCHKSUM        0
#define UIP_CONF_UDP             1
#define UIP_CONF_UDP_CHECKSUMS   1
#define UIP_CONF_TCP		 1
/*---------------------------------------------------------------------------*/
/* include the project config */
/* PROJECT_CONF_H might be defined in the project Makefile */
#ifdef PROJECT_CONF_H
#include "project-conf.h"
#endif /* PROJECT_CONF_H */
/*---------------------------------------------------------------------------*/
#endif /* CONTIKI_CONF_H */
/*---------------------------------------------------------------------------*/