Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.

Upstream: https://github.com/ARMmbed/DAPLink

Revision:
0:01f31e923fe2
diff -r 000000000000 -r 01f31e923fe2 source/family/st/stm32f746zg/flash_blob.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/source/family/st/stm32f746zg/flash_blob.c	Tue Apr 07 12:55:42 2020 +0200
@@ -0,0 +1,65 @@
+/* Flash OS Routines (Automagically Generated)
+ * Copyright (c) 2009-2019 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+static const uint32_t STM32F746ZG_flash_prog_blob[] = {
+    0xE00ABE00, 0x062D780D, 0x24084068, 0xD3000040, 0x1E644058, 0x1C49D1FA, 0x2A001E52, 0x4770D1F2,
+    0x8f4ff3bf, 0x03004770, 0x28400e00, 0x0980d302, 0x47701d00, 0x477008c0, 0x49474848, 0x49486041,
+    0x21006041, 0x68c16001, 0x431122f0, 0x694060c1, 0xd4060680, 0x49434844, 0x21066001, 0x49436041,
+    0x20006081, 0x483d4770, 0x05426901, 0x61014311, 0x47702000, 0x4839b510, 0x24046901, 0x61014321,
+    0x03a26901, 0x61014311, 0x4a374939, 0x6011e000, 0x03db68c3, 0x6901d4fb, 0x610143a1, 0xbd102000,
+    0xf7ffb530, 0x492dffc0, 0x23f068ca, 0x60ca431a, 0x610c2402, 0x0700690a, 0x43020e40, 0x6908610a,
+    0x431003e2, 0x482a6108, 0xe0004a27, 0x68cd6010, 0xd4fb03ed, 0x43a06908, 0x68c86108, 0x0f000600,
+    0x68c8d003, 0x60c84318, 0xbd302001, 0x4c1bb5f0, 0x08891cc9, 0x008968e5, 0x431d23f0, 0x230060e5,
+    0x27016123, 0x4d1a06ff, 0x6923e021, 0x43334e19, 0x03066123, 0x19f60b36, 0x60336813, 0x8f4ff3bf,
+    0xe0004e11, 0x68e36035, 0xd4fb03db, 0x085b6923, 0x6123005b, 0x061b68e3, 0xd0050f1b, 0x21f068e0,
+    0x60e04308, 0xbdf02001, 0x1f091d00, 0x29001d12, 0x2000d1db, 0x0000bdf0, 0x45670123, 0x40023c00,
+    0xcdef89ab, 0x00005555, 0x40003000, 0x00000fff, 0x0000aaaa, 0x00000201, 0x00000000
+};
+
+/**
+* List of start and size for each size of flash sector
+* The size will apply to all sectors between the listed address and the next address
+* in the list.
+* The last pair in the list will have sectors starting at that address and ending
+* at address start + size.
+*/
+static const sector_info_t sectors_info[] = {
+    {0x08000000, 0x8000},
+};
+
+static const program_target_t flash = {
+    0x20000039, // Init
+    0x20000067, // UnInit
+    0x20000075, // EraseChip
+    0x200000a1, // EraseSector
+    0x200000ed, // ProgramPage
+    0x0,        // Verify
+
+    // BKPT : start of blob + 1
+    // RSB  : blob start + header + rw data offset
+    // RSP  : stack pointer
+    {
+        0x20000001,
+        0x20000178,
+        0x20000800
+    },
+
+    0x20000000 + 0x00000A00,  // mem buffer location
+    0x20000000,               // location to write prog_blob in target RAM
+    sizeof(STM32F746ZG_flash_prog_blob),   // prog_blob size
+    STM32F746ZG_flash_prog_blob,           // address of prog_blob
+    0x00000400       // ram_to_flash_bytes_to_be_written
+};