Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.
Upstream: https://github.com/ARMmbed/DAPLink
Diff: source/family/st/stm32f746zg/flash_blob.c
- Revision:
- 0:01f31e923fe2
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/source/family/st/stm32f746zg/flash_blob.c Tue Apr 07 12:55:42 2020 +0200 @@ -0,0 +1,65 @@ +/* Flash OS Routines (Automagically Generated) + * Copyright (c) 2009-2019 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +static const uint32_t STM32F746ZG_flash_prog_blob[] = { + 0xE00ABE00, 0x062D780D, 0x24084068, 0xD3000040, 0x1E644058, 0x1C49D1FA, 0x2A001E52, 0x4770D1F2, + 0x8f4ff3bf, 0x03004770, 0x28400e00, 0x0980d302, 0x47701d00, 0x477008c0, 0x49474848, 0x49486041, + 0x21006041, 0x68c16001, 0x431122f0, 0x694060c1, 0xd4060680, 0x49434844, 0x21066001, 0x49436041, + 0x20006081, 0x483d4770, 0x05426901, 0x61014311, 0x47702000, 0x4839b510, 0x24046901, 0x61014321, + 0x03a26901, 0x61014311, 0x4a374939, 0x6011e000, 0x03db68c3, 0x6901d4fb, 0x610143a1, 0xbd102000, + 0xf7ffb530, 0x492dffc0, 0x23f068ca, 0x60ca431a, 0x610c2402, 0x0700690a, 0x43020e40, 0x6908610a, + 0x431003e2, 0x482a6108, 0xe0004a27, 0x68cd6010, 0xd4fb03ed, 0x43a06908, 0x68c86108, 0x0f000600, + 0x68c8d003, 0x60c84318, 0xbd302001, 0x4c1bb5f0, 0x08891cc9, 0x008968e5, 0x431d23f0, 0x230060e5, + 0x27016123, 0x4d1a06ff, 0x6923e021, 0x43334e19, 0x03066123, 0x19f60b36, 0x60336813, 0x8f4ff3bf, + 0xe0004e11, 0x68e36035, 0xd4fb03db, 0x085b6923, 0x6123005b, 0x061b68e3, 0xd0050f1b, 0x21f068e0, + 0x60e04308, 0xbdf02001, 0x1f091d00, 0x29001d12, 0x2000d1db, 0x0000bdf0, 0x45670123, 0x40023c00, + 0xcdef89ab, 0x00005555, 0x40003000, 0x00000fff, 0x0000aaaa, 0x00000201, 0x00000000 +}; + +/** +* List of start and size for each size of flash sector +* The size will apply to all sectors between the listed address and the next address +* in the list. +* The last pair in the list will have sectors starting at that address and ending +* at address start + size. +*/ +static const sector_info_t sectors_info[] = { + {0x08000000, 0x8000}, +}; + +static const program_target_t flash = { + 0x20000039, // Init + 0x20000067, // UnInit + 0x20000075, // EraseChip + 0x200000a1, // EraseSector + 0x200000ed, // ProgramPage + 0x0, // Verify + + // BKPT : start of blob + 1 + // RSB : blob start + header + rw data offset + // RSP : stack pointer + { + 0x20000001, + 0x20000178, + 0x20000800 + }, + + 0x20000000 + 0x00000A00, // mem buffer location + 0x20000000, // location to write prog_blob in target RAM + sizeof(STM32F746ZG_flash_prog_blob), // prog_blob size + STM32F746ZG_flash_prog_blob, // address of prog_blob + 0x00000400 // ram_to_flash_bytes_to_be_written +};