Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.

Upstream: https://github.com/ARMmbed/DAPLink

Revision:
0:01f31e923fe2
diff -r 000000000000 -r 01f31e923fe2 source/family/nxp/lpc812/flash_blob.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/source/family/nxp/lpc812/flash_blob.c	Tue Apr 07 12:55:42 2020 +0200
@@ -0,0 +1,67 @@
+/**
+ * @file    flash_blob.c
+ * @brief   Flash algorithm for the lpc812
+ *
+ * DAPLink Interface Firmware
+ * Copyright (c) 2009-2019, ARM Limited, All Rights Reserved
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "flash_blob.h"
+
+static const uint32_t LPC812_FLM[] = {
+    0xE00ABE00, 0x062D780D, 0x24084068, 0xD3000040, 0x1E644058, 0x1C49D1FA, 0x2A001E52, 0x4770D1F2,
+
+    // flash algo begins here
+    /* 0x20 */ 0x47700a80, 0x48454946, 0x60084449, 0x22004845, 0x21016302, 0x63426341, 0x63816341, 0x20024941,
+    /* 0x40 */ 0x70083940, 0x47704610, 0x47702000, 0x4c3eb5f8, 0x444c2032, 0x260f2500, 0xc2614622L, 0x31144621,
+    /* 0x60 */ 0x46204f3a, 0x47b89100, 0x28006960, 0x2034d10c, 0xc1614621L, 0x44484832, 0x60e06800, 0x99004620L,
+    /* 0x80 */ 0x696047b8, 0xd0002800L, 0xbdf82001L, 0x4d2eb5f8, 0x444d0a84, 0x60282032, 0x46292000, 0x311460ac,
+    /* 0xa0 */ 0x4e2a6068, 0x4628460f, 0x696847b0, 0xd10d2800L, 0x2034606c, 0x602860ac, 0x46394821, 0x68004448,
+    /* 0xc0 */ 0x462860e8, 0x696847b0, 0xd0002800L, 0xbdf82001L, 0x6b5f8, 0xd10e4614L, 0x68206861, 0x184068e2,
+    /* 0xe0 */ 0x188968a1, 0x69211840, 0x69611840, 0x69a11840, 0x42401840, 0x4d1461e0, 0x444d2132, 0x21006029,
+    /* 0x100 */ 0xab06069, 0x462960a8, 0x4f103114, 0x91004628L, 0x696847b8, 0xd10f2800L, 0x2033606e, 0x602860ac,
+    /* 0x120 */ 0x60e82040, 0x44484806, 0x61286800, 0x99004628L, 0x696847b8, 0xd0002800L, 0xbdf82001L, 0x2ee0,
+    /* 0x140 */ 0x4, 0x40048040, 0x8, 0x1fff1ff1
+};
+
+/**
+* List of start and size for each size of flash sector
+* The size will apply to all sectors between the listed address and the next address
+* in the list.
+* The last pair in the list will have sectors starting at that address and ending
+* at address start + size.
+*/
+static const sector_info_t sectors_info[] = {
+    {0x00000000, 0x1000},
+};
+
+static const program_target_t flash = {
+    0x10000025, // init
+    0x10000049, // uninit
+    0x1000004d, // erase_chip
+    0x1000008d, // erase_sector
+    0x100000d1, // program_page
+    0x0,        // Verify
+    
+    {0x10000001, 0x10000300, 0x10001000}, // {breakpoint, RSB, RSP}
+
+    0x10000400, // program_buffer
+    0x10000000, // algo_start
+    0x00000150, // algo_size
+    LPC812_FLM, // image
+
+    64          // ram_to_flash_bytes_to_be_written
+};