Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.
Upstream: https://github.com/ARMmbed/DAPLink
source/family/nxp/lpc812/flash_blob.c
- Committer:
- Pawel Zarembski
- Date:
- 2020-04-07
- Revision:
- 0:01f31e923fe2
File content as of revision 0:01f31e923fe2:
/** * @file flash_blob.c * @brief Flash algorithm for the lpc812 * * DAPLink Interface Firmware * Copyright (c) 2009-2019, ARM Limited, All Rights Reserved * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include "flash_blob.h" static const uint32_t LPC812_FLM[] = { 0xE00ABE00, 0x062D780D, 0x24084068, 0xD3000040, 0x1E644058, 0x1C49D1FA, 0x2A001E52, 0x4770D1F2, // flash algo begins here /* 0x20 */ 0x47700a80, 0x48454946, 0x60084449, 0x22004845, 0x21016302, 0x63426341, 0x63816341, 0x20024941, /* 0x40 */ 0x70083940, 0x47704610, 0x47702000, 0x4c3eb5f8, 0x444c2032, 0x260f2500, 0xc2614622L, 0x31144621, /* 0x60 */ 0x46204f3a, 0x47b89100, 0x28006960, 0x2034d10c, 0xc1614621L, 0x44484832, 0x60e06800, 0x99004620L, /* 0x80 */ 0x696047b8, 0xd0002800L, 0xbdf82001L, 0x4d2eb5f8, 0x444d0a84, 0x60282032, 0x46292000, 0x311460ac, /* 0xa0 */ 0x4e2a6068, 0x4628460f, 0x696847b0, 0xd10d2800L, 0x2034606c, 0x602860ac, 0x46394821, 0x68004448, /* 0xc0 */ 0x462860e8, 0x696847b0, 0xd0002800L, 0xbdf82001L, 0x6b5f8, 0xd10e4614L, 0x68206861, 0x184068e2, /* 0xe0 */ 0x188968a1, 0x69211840, 0x69611840, 0x69a11840, 0x42401840, 0x4d1461e0, 0x444d2132, 0x21006029, /* 0x100 */ 0xab06069, 0x462960a8, 0x4f103114, 0x91004628L, 0x696847b8, 0xd10f2800L, 0x2033606e, 0x602860ac, /* 0x120 */ 0x60e82040, 0x44484806, 0x61286800, 0x99004628L, 0x696847b8, 0xd0002800L, 0xbdf82001L, 0x2ee0, /* 0x140 */ 0x4, 0x40048040, 0x8, 0x1fff1ff1 }; /** * List of start and size for each size of flash sector * The size will apply to all sectors between the listed address and the next address * in the list. * The last pair in the list will have sectors starting at that address and ending * at address start + size. */ static const sector_info_t sectors_info[] = { {0x00000000, 0x1000}, }; static const program_target_t flash = { 0x10000025, // init 0x10000049, // uninit 0x1000004d, // erase_chip 0x1000008d, // erase_sector 0x100000d1, // program_page 0x0, // Verify {0x10000001, 0x10000300, 0x10001000}, // {breakpoint, RSB, RSP} 0x10000400, // program_buffer 0x10000000, // algo_start 0x00000150, // algo_size LPC812_FLM, // image 64 // ram_to_flash_bytes_to_be_written };