Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.

Upstream: https://github.com/ARMmbed/DAPLink

source/hic_hal/atmel/sam3u2c/instance/tc0.h

Committer:
Pawel Zarembski
Date:
2020-04-07
Revision:
0:01f31e923fe2

File content as of revision 0:01f31e923fe2:

/* ---------------------------------------------------------------------------- */
/*                  Atmel Microcontroller Software Support                      */
/*                       SAM Software Package License                           */
/* ---------------------------------------------------------------------------- */
/* Copyright (c) %copyright_year%, Atmel Corporation                                        */
/*                                                                              */
/* All rights reserved.                                                         */
/*                                                                              */
/* Redistribution and use in source and binary forms, with or without           */
/* modification, are permitted provided that the following condition is met:    */
/*                                                                              */
/* - Redistributions of source code must retain the above copyright notice,     */
/* this list of conditions and the disclaimer below.                            */
/*                                                                              */
/* Atmel's name may not be used to endorse or promote products derived from     */
/* this software without specific prior written permission.                     */
/*                                                                              */
/* DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR   */
/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE   */
/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,      */
/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,  */
/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    */
/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING         */
/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                           */
/* ---------------------------------------------------------------------------- */

#ifndef _SAM3U_TC0_INSTANCE_
#define _SAM3U_TC0_INSTANCE_

/* ========== Register definition for TC0 peripheral ========== */
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
#define REG_TC0_CCR0          (0x40080000U) /**< \brief (TC0) Channel Control Register (channel = 0) */
#define REG_TC0_CMR0          (0x40080004U) /**< \brief (TC0) Channel Mode Register (channel = 0) */
#define REG_TC0_CV0           (0x40080010U) /**< \brief (TC0) Counter Value (channel = 0) */
#define REG_TC0_RA0           (0x40080014U) /**< \brief (TC0) Register A (channel = 0) */
#define REG_TC0_RB0           (0x40080018U) /**< \brief (TC0) Register B (channel = 0) */
#define REG_TC0_RC0           (0x4008001CU) /**< \brief (TC0) Register C (channel = 0) */
#define REG_TC0_SR0           (0x40080020U) /**< \brief (TC0) Status Register (channel = 0) */
#define REG_TC0_IER0          (0x40080024U) /**< \brief (TC0) Interrupt Enable Register (channel = 0) */
#define REG_TC0_IDR0          (0x40080028U) /**< \brief (TC0) Interrupt Disable Register (channel = 0) */
#define REG_TC0_IMR0          (0x4008002CU) /**< \brief (TC0) Interrupt Mask Register (channel = 0) */
#define REG_TC0_CCR1          (0x40080040U) /**< \brief (TC0) Channel Control Register (channel = 1) */
#define REG_TC0_CMR1          (0x40080044U) /**< \brief (TC0) Channel Mode Register (channel = 1) */
#define REG_TC0_CV1           (0x40080050U) /**< \brief (TC0) Counter Value (channel = 1) */
#define REG_TC0_RA1           (0x40080054U) /**< \brief (TC0) Register A (channel = 1) */
#define REG_TC0_RB1           (0x40080058U) /**< \brief (TC0) Register B (channel = 1) */
#define REG_TC0_RC1           (0x4008005CU) /**< \brief (TC0) Register C (channel = 1) */
#define REG_TC0_SR1           (0x40080060U) /**< \brief (TC0) Status Register (channel = 1) */
#define REG_TC0_IER1          (0x40080064U) /**< \brief (TC0) Interrupt Enable Register (channel = 1) */
#define REG_TC0_IDR1          (0x40080068U) /**< \brief (TC0) Interrupt Disable Register (channel = 1) */
#define REG_TC0_IMR1          (0x4008006CU) /**< \brief (TC0) Interrupt Mask Register (channel = 1) */
#define REG_TC0_CCR2          (0x40080080U) /**< \brief (TC0) Channel Control Register (channel = 2) */
#define REG_TC0_CMR2          (0x40080084U) /**< \brief (TC0) Channel Mode Register (channel = 2) */
#define REG_TC0_CV2           (0x40080090U) /**< \brief (TC0) Counter Value (channel = 2) */
#define REG_TC0_RA2           (0x40080094U) /**< \brief (TC0) Register A (channel = 2) */
#define REG_TC0_RB2           (0x40080098U) /**< \brief (TC0) Register B (channel = 2) */
#define REG_TC0_RC2           (0x4008009CU) /**< \brief (TC0) Register C (channel = 2) */
#define REG_TC0_SR2           (0x400800A0U) /**< \brief (TC0) Status Register (channel = 2) */
#define REG_TC0_IER2          (0x400800A4U) /**< \brief (TC0) Interrupt Enable Register (channel = 2) */
#define REG_TC0_IDR2          (0x400800A8U) /**< \brief (TC0) Interrupt Disable Register (channel = 2) */
#define REG_TC0_IMR2          (0x400800ACU) /**< \brief (TC0) Interrupt Mask Register (channel = 2) */
#define REG_TC0_BCR           (0x400800C0U) /**< \brief (TC0) Block Control Register */
#define REG_TC0_BMR           (0x400800C4U) /**< \brief (TC0) Block Mode Register */
#define REG_TC0_QIER          (0x400800C8U) /**< \brief (TC0) QDEC Interrupt Enable Register */
#define REG_TC0_QIDR          (0x400800CCU) /**< \brief (TC0) QDEC Interrupt Disable Register */
#define REG_TC0_QIMR          (0x400800D0U) /**< \brief (TC0) QDEC Interrupt Mask Register */
#define REG_TC0_QISR          (0x400800D4U) /**< \brief (TC0) QDEC Interrupt Status Register */
#else
#define REG_TC0_CCR0 (*(WoReg*)0x40080000U) /**< \brief (TC0) Channel Control Register (channel = 0) */
#define REG_TC0_CMR0 (*(RwReg*)0x40080004U) /**< \brief (TC0) Channel Mode Register (channel = 0) */
#define REG_TC0_CV0  (*(RoReg*)0x40080010U) /**< \brief (TC0) Counter Value (channel = 0) */
#define REG_TC0_RA0  (*(RwReg*)0x40080014U) /**< \brief (TC0) Register A (channel = 0) */
#define REG_TC0_RB0  (*(RwReg*)0x40080018U) /**< \brief (TC0) Register B (channel = 0) */
#define REG_TC0_RC0  (*(RwReg*)0x4008001CU) /**< \brief (TC0) Register C (channel = 0) */
#define REG_TC0_SR0  (*(RoReg*)0x40080020U) /**< \brief (TC0) Status Register (channel = 0) */
#define REG_TC0_IER0 (*(WoReg*)0x40080024U) /**< \brief (TC0) Interrupt Enable Register (channel = 0) */
#define REG_TC0_IDR0 (*(WoReg*)0x40080028U) /**< \brief (TC0) Interrupt Disable Register (channel = 0) */
#define REG_TC0_IMR0 (*(RoReg*)0x4008002CU) /**< \brief (TC0) Interrupt Mask Register (channel = 0) */
#define REG_TC0_CCR1 (*(WoReg*)0x40080040U) /**< \brief (TC0) Channel Control Register (channel = 1) */
#define REG_TC0_CMR1 (*(RwReg*)0x40080044U) /**< \brief (TC0) Channel Mode Register (channel = 1) */
#define REG_TC0_CV1  (*(RoReg*)0x40080050U) /**< \brief (TC0) Counter Value (channel = 1) */
#define REG_TC0_RA1  (*(RwReg*)0x40080054U) /**< \brief (TC0) Register A (channel = 1) */
#define REG_TC0_RB1  (*(RwReg*)0x40080058U) /**< \brief (TC0) Register B (channel = 1) */
#define REG_TC0_RC1  (*(RwReg*)0x4008005CU) /**< \brief (TC0) Register C (channel = 1) */
#define REG_TC0_SR1  (*(RoReg*)0x40080060U) /**< \brief (TC0) Status Register (channel = 1) */
#define REG_TC0_IER1 (*(WoReg*)0x40080064U) /**< \brief (TC0) Interrupt Enable Register (channel = 1) */
#define REG_TC0_IDR1 (*(WoReg*)0x40080068U) /**< \brief (TC0) Interrupt Disable Register (channel = 1) */
#define REG_TC0_IMR1 (*(RoReg*)0x4008006CU) /**< \brief (TC0) Interrupt Mask Register (channel = 1) */
#define REG_TC0_CCR2 (*(WoReg*)0x40080080U) /**< \brief (TC0) Channel Control Register (channel = 2) */
#define REG_TC0_CMR2 (*(RwReg*)0x40080084U) /**< \brief (TC0) Channel Mode Register (channel = 2) */
#define REG_TC0_CV2  (*(RoReg*)0x40080090U) /**< \brief (TC0) Counter Value (channel = 2) */
#define REG_TC0_RA2  (*(RwReg*)0x40080094U) /**< \brief (TC0) Register A (channel = 2) */
#define REG_TC0_RB2  (*(RwReg*)0x40080098U) /**< \brief (TC0) Register B (channel = 2) */
#define REG_TC0_RC2  (*(RwReg*)0x4008009CU) /**< \brief (TC0) Register C (channel = 2) */
#define REG_TC0_SR2  (*(RoReg*)0x400800A0U) /**< \brief (TC0) Status Register (channel = 2) */
#define REG_TC0_IER2 (*(WoReg*)0x400800A4U) /**< \brief (TC0) Interrupt Enable Register (channel = 2) */
#define REG_TC0_IDR2 (*(WoReg*)0x400800A8U) /**< \brief (TC0) Interrupt Disable Register (channel = 2) */
#define REG_TC0_IMR2 (*(RoReg*)0x400800ACU) /**< \brief (TC0) Interrupt Mask Register (channel = 2) */
#define REG_TC0_BCR  (*(WoReg*)0x400800C0U) /**< \brief (TC0) Block Control Register */
#define REG_TC0_BMR  (*(RwReg*)0x400800C4U) /**< \brief (TC0) Block Mode Register */
#define REG_TC0_QIER (*(WoReg*)0x400800C8U) /**< \brief (TC0) QDEC Interrupt Enable Register */
#define REG_TC0_QIDR (*(WoReg*)0x400800CCU) /**< \brief (TC0) QDEC Interrupt Disable Register */
#define REG_TC0_QIMR (*(RoReg*)0x400800D0U) /**< \brief (TC0) QDEC Interrupt Mask Register */
#define REG_TC0_QISR (*(RoReg*)0x400800D4U) /**< \brief (TC0) QDEC Interrupt Status Register */
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */

#endif /* _SAM3U_TC0_INSTANCE_ */