Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.
Upstream: https://github.com/ARMmbed/DAPLink
source/hic_hal/atmel/sam3u2c/component/pdc.h
- Committer:
- Pawel Zarembski
- Date:
- 2020-04-07
- Revision:
- 0:01f31e923fe2
File content as of revision 0:01f31e923fe2:
/* ---------------------------------------------------------------------------- */ /* Atmel Microcontroller Software Support */ /* SAM Software Package License */ /* ---------------------------------------------------------------------------- */ /* Copyright (c) %copyright_year%, Atmel Corporation */ /* */ /* All rights reserved. */ /* */ /* Redistribution and use in source and binary forms, with or without */ /* modification, are permitted provided that the following condition is met: */ /* */ /* - Redistributions of source code must retain the above copyright notice, */ /* this list of conditions and the disclaimer below. */ /* */ /* Atmel's name may not be used to endorse or promote products derived from */ /* this software without specific prior written permission. */ /* */ /* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR */ /* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */ /* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE */ /* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, */ /* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */ /* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, */ /* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF */ /* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING */ /* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */ /* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* ---------------------------------------------------------------------------- */ #ifndef _SAM3U_PDC_COMPONENT_ #define _SAM3U_PDC_COMPONENT_ /* ============================================================================= */ /** SOFTWARE API DEFINITION FOR Peripheral DMA Controller */ /* ============================================================================= */ /** \addtogroup SAM3U_PDC Peripheral DMA Controller */ /*@{*/ #if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) /** \brief Pdc hardware registers */ typedef struct { RwReg PERIPH_RPR; /**< \brief (Pdc Offset: 0x0) Receive Pointer Register */ RwReg PERIPH_RCR; /**< \brief (Pdc Offset: 0x4) Receive Counter Register */ RwReg PERIPH_TPR; /**< \brief (Pdc Offset: 0x8) Transmit Pointer Register */ RwReg PERIPH_TCR; /**< \brief (Pdc Offset: 0xC) Transmit Counter Register */ RwReg PERIPH_RNPR; /**< \brief (Pdc Offset: 0x10) Receive Next Pointer Register */ RwReg PERIPH_RNCR; /**< \brief (Pdc Offset: 0x14) Receive Next Counter Register */ RwReg PERIPH_TNPR; /**< \brief (Pdc Offset: 0x18) Transmit Next Pointer Register */ RwReg PERIPH_TNCR; /**< \brief (Pdc Offset: 0x1C) Transmit Next Counter Register */ WoReg PERIPH_PTCR; /**< \brief (Pdc Offset: 0x20) Transfer Control Register */ RoReg PERIPH_PTSR; /**< \brief (Pdc Offset: 0x24) Transfer Status Register */ } Pdc; #endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- PERIPH_RPR : (PDC Offset: 0x0) Receive Pointer Register -------- */ #define PERIPH_RPR_RXPTR_Pos 0 #define PERIPH_RPR_RXPTR_Msk (0xffffffffu << PERIPH_RPR_RXPTR_Pos) /**< \brief (PERIPH_RPR) Receive Pointer Register */ #define PERIPH_RPR_RXPTR(value) ((PERIPH_RPR_RXPTR_Msk & ((value) << PERIPH_RPR_RXPTR_Pos))) /* -------- PERIPH_RCR : (PDC Offset: 0x4) Receive Counter Register -------- */ #define PERIPH_RCR_RXCTR_Pos 0 #define PERIPH_RCR_RXCTR_Msk (0xffffu << PERIPH_RCR_RXCTR_Pos) /**< \brief (PERIPH_RCR) Receive Counter Register */ #define PERIPH_RCR_RXCTR(value) ((PERIPH_RCR_RXCTR_Msk & ((value) << PERIPH_RCR_RXCTR_Pos))) /* -------- PERIPH_TPR : (PDC Offset: 0x8) Transmit Pointer Register -------- */ #define PERIPH_TPR_TXPTR_Pos 0 #define PERIPH_TPR_TXPTR_Msk (0xffffffffu << PERIPH_TPR_TXPTR_Pos) /**< \brief (PERIPH_TPR) Transmit Counter Register */ #define PERIPH_TPR_TXPTR(value) ((PERIPH_TPR_TXPTR_Msk & ((value) << PERIPH_TPR_TXPTR_Pos))) /* -------- PERIPH_TCR : (PDC Offset: 0xC) Transmit Counter Register -------- */ #define PERIPH_TCR_TXCTR_Pos 0 #define PERIPH_TCR_TXCTR_Msk (0xffffu << PERIPH_TCR_TXCTR_Pos) /**< \brief (PERIPH_TCR) Transmit Counter Register */ #define PERIPH_TCR_TXCTR(value) ((PERIPH_TCR_TXCTR_Msk & ((value) << PERIPH_TCR_TXCTR_Pos))) /* -------- PERIPH_RNPR : (PDC Offset: 0x10) Receive Next Pointer Register -------- */ #define PERIPH_RNPR_RXNPTR_Pos 0 #define PERIPH_RNPR_RXNPTR_Msk (0xffffffffu << PERIPH_RNPR_RXNPTR_Pos) /**< \brief (PERIPH_RNPR) Receive Next Pointer */ #define PERIPH_RNPR_RXNPTR(value) ((PERIPH_RNPR_RXNPTR_Msk & ((value) << PERIPH_RNPR_RXNPTR_Pos))) /* -------- PERIPH_RNCR : (PDC Offset: 0x14) Receive Next Counter Register -------- */ #define PERIPH_RNCR_RXNCTR_Pos 0 #define PERIPH_RNCR_RXNCTR_Msk (0xffffu << PERIPH_RNCR_RXNCTR_Pos) /**< \brief (PERIPH_RNCR) Receive Next Counter */ #define PERIPH_RNCR_RXNCTR(value) ((PERIPH_RNCR_RXNCTR_Msk & ((value) << PERIPH_RNCR_RXNCTR_Pos))) /* -------- PERIPH_TNPR : (PDC Offset: 0x18) Transmit Next Pointer Register -------- */ #define PERIPH_TNPR_TXNPTR_Pos 0 #define PERIPH_TNPR_TXNPTR_Msk (0xffffffffu << PERIPH_TNPR_TXNPTR_Pos) /**< \brief (PERIPH_TNPR) Transmit Next Pointer */ #define PERIPH_TNPR_TXNPTR(value) ((PERIPH_TNPR_TXNPTR_Msk & ((value) << PERIPH_TNPR_TXNPTR_Pos))) /* -------- PERIPH_TNCR : (PDC Offset: 0x1C) Transmit Next Counter Register -------- */ #define PERIPH_TNCR_TXNCTR_Pos 0 #define PERIPH_TNCR_TXNCTR_Msk (0xffffu << PERIPH_TNCR_TXNCTR_Pos) /**< \brief (PERIPH_TNCR) Transmit Counter Next */ #define PERIPH_TNCR_TXNCTR(value) ((PERIPH_TNCR_TXNCTR_Msk & ((value) << PERIPH_TNCR_TXNCTR_Pos))) /* -------- PERIPH_PTCR : (PDC Offset: 0x20) Transfer Control Register -------- */ #define PERIPH_PTCR_RXTEN (0x1u << 0) /**< \brief (PERIPH_PTCR) Receiver Transfer Enable */ #define PERIPH_PTCR_RXTDIS (0x1u << 1) /**< \brief (PERIPH_PTCR) Receiver Transfer Disable */ #define PERIPH_PTCR_TXTEN (0x1u << 8) /**< \brief (PERIPH_PTCR) Transmitter Transfer Enable */ #define PERIPH_PTCR_TXTDIS (0x1u << 9) /**< \brief (PERIPH_PTCR) Transmitter Transfer Disable */ /* -------- PERIPH_PTSR : (PDC Offset: 0x24) Transfer Status Register -------- */ #define PERIPH_PTSR_RXTEN (0x1u << 0) /**< \brief (PERIPH_PTSR) Receiver Transfer Enable */ #define PERIPH_PTSR_TXTEN (0x1u << 8) /**< \brief (PERIPH_PTSR) Transmitter Transfer Enable */ /*@}*/ #endif /* _SAM3U_PDC_COMPONENT_ */