Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.
Upstream: https://github.com/ARMmbed/DAPLink
Diff: source/hic_hal/atmel/sam3u2c/component/pdc.h
- Revision:
- 0:01f31e923fe2
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/source/hic_hal/atmel/sam3u2c/component/pdc.h Tue Apr 07 12:55:42 2020 +0200 @@ -0,0 +1,98 @@ +/* ---------------------------------------------------------------------------- */ +/* Atmel Microcontroller Software Support */ +/* SAM Software Package License */ +/* ---------------------------------------------------------------------------- */ +/* Copyright (c) %copyright_year%, Atmel Corporation */ +/* */ +/* All rights reserved. */ +/* */ +/* Redistribution and use in source and binary forms, with or without */ +/* modification, are permitted provided that the following condition is met: */ +/* */ +/* - Redistributions of source code must retain the above copyright notice, */ +/* this list of conditions and the disclaimer below. */ +/* */ +/* Atmel's name may not be used to endorse or promote products derived from */ +/* this software without specific prior written permission. */ +/* */ +/* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR */ +/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */ +/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE */ +/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, */ +/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */ +/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, */ +/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF */ +/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING */ +/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */ +/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +/* ---------------------------------------------------------------------------- */ + +#ifndef _SAM3U_PDC_COMPONENT_ +#define _SAM3U_PDC_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR Peripheral DMA Controller */ +/* ============================================================================= */ +/** \addtogroup SAM3U_PDC Peripheral DMA Controller */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief Pdc hardware registers */ +typedef struct { + RwReg PERIPH_RPR; /**< \brief (Pdc Offset: 0x0) Receive Pointer Register */ + RwReg PERIPH_RCR; /**< \brief (Pdc Offset: 0x4) Receive Counter Register */ + RwReg PERIPH_TPR; /**< \brief (Pdc Offset: 0x8) Transmit Pointer Register */ + RwReg PERIPH_TCR; /**< \brief (Pdc Offset: 0xC) Transmit Counter Register */ + RwReg PERIPH_RNPR; /**< \brief (Pdc Offset: 0x10) Receive Next Pointer Register */ + RwReg PERIPH_RNCR; /**< \brief (Pdc Offset: 0x14) Receive Next Counter Register */ + RwReg PERIPH_TNPR; /**< \brief (Pdc Offset: 0x18) Transmit Next Pointer Register */ + RwReg PERIPH_TNCR; /**< \brief (Pdc Offset: 0x1C) Transmit Next Counter Register */ + WoReg PERIPH_PTCR; /**< \brief (Pdc Offset: 0x20) Transfer Control Register */ + RoReg PERIPH_PTSR; /**< \brief (Pdc Offset: 0x24) Transfer Status Register */ +} Pdc; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- PERIPH_RPR : (PDC Offset: 0x0) Receive Pointer Register -------- */ +#define PERIPH_RPR_RXPTR_Pos 0 +#define PERIPH_RPR_RXPTR_Msk (0xffffffffu << PERIPH_RPR_RXPTR_Pos) /**< \brief (PERIPH_RPR) Receive Pointer Register */ +#define PERIPH_RPR_RXPTR(value) ((PERIPH_RPR_RXPTR_Msk & ((value) << PERIPH_RPR_RXPTR_Pos))) +/* -------- PERIPH_RCR : (PDC Offset: 0x4) Receive Counter Register -------- */ +#define PERIPH_RCR_RXCTR_Pos 0 +#define PERIPH_RCR_RXCTR_Msk (0xffffu << PERIPH_RCR_RXCTR_Pos) /**< \brief (PERIPH_RCR) Receive Counter Register */ +#define PERIPH_RCR_RXCTR(value) ((PERIPH_RCR_RXCTR_Msk & ((value) << PERIPH_RCR_RXCTR_Pos))) +/* -------- PERIPH_TPR : (PDC Offset: 0x8) Transmit Pointer Register -------- */ +#define PERIPH_TPR_TXPTR_Pos 0 +#define PERIPH_TPR_TXPTR_Msk (0xffffffffu << PERIPH_TPR_TXPTR_Pos) /**< \brief (PERIPH_TPR) Transmit Counter Register */ +#define PERIPH_TPR_TXPTR(value) ((PERIPH_TPR_TXPTR_Msk & ((value) << PERIPH_TPR_TXPTR_Pos))) +/* -------- PERIPH_TCR : (PDC Offset: 0xC) Transmit Counter Register -------- */ +#define PERIPH_TCR_TXCTR_Pos 0 +#define PERIPH_TCR_TXCTR_Msk (0xffffu << PERIPH_TCR_TXCTR_Pos) /**< \brief (PERIPH_TCR) Transmit Counter Register */ +#define PERIPH_TCR_TXCTR(value) ((PERIPH_TCR_TXCTR_Msk & ((value) << PERIPH_TCR_TXCTR_Pos))) +/* -------- PERIPH_RNPR : (PDC Offset: 0x10) Receive Next Pointer Register -------- */ +#define PERIPH_RNPR_RXNPTR_Pos 0 +#define PERIPH_RNPR_RXNPTR_Msk (0xffffffffu << PERIPH_RNPR_RXNPTR_Pos) /**< \brief (PERIPH_RNPR) Receive Next Pointer */ +#define PERIPH_RNPR_RXNPTR(value) ((PERIPH_RNPR_RXNPTR_Msk & ((value) << PERIPH_RNPR_RXNPTR_Pos))) +/* -------- PERIPH_RNCR : (PDC Offset: 0x14) Receive Next Counter Register -------- */ +#define PERIPH_RNCR_RXNCTR_Pos 0 +#define PERIPH_RNCR_RXNCTR_Msk (0xffffu << PERIPH_RNCR_RXNCTR_Pos) /**< \brief (PERIPH_RNCR) Receive Next Counter */ +#define PERIPH_RNCR_RXNCTR(value) ((PERIPH_RNCR_RXNCTR_Msk & ((value) << PERIPH_RNCR_RXNCTR_Pos))) +/* -------- PERIPH_TNPR : (PDC Offset: 0x18) Transmit Next Pointer Register -------- */ +#define PERIPH_TNPR_TXNPTR_Pos 0 +#define PERIPH_TNPR_TXNPTR_Msk (0xffffffffu << PERIPH_TNPR_TXNPTR_Pos) /**< \brief (PERIPH_TNPR) Transmit Next Pointer */ +#define PERIPH_TNPR_TXNPTR(value) ((PERIPH_TNPR_TXNPTR_Msk & ((value) << PERIPH_TNPR_TXNPTR_Pos))) +/* -------- PERIPH_TNCR : (PDC Offset: 0x1C) Transmit Next Counter Register -------- */ +#define PERIPH_TNCR_TXNCTR_Pos 0 +#define PERIPH_TNCR_TXNCTR_Msk (0xffffu << PERIPH_TNCR_TXNCTR_Pos) /**< \brief (PERIPH_TNCR) Transmit Counter Next */ +#define PERIPH_TNCR_TXNCTR(value) ((PERIPH_TNCR_TXNCTR_Msk & ((value) << PERIPH_TNCR_TXNCTR_Pos))) +/* -------- PERIPH_PTCR : (PDC Offset: 0x20) Transfer Control Register -------- */ +#define PERIPH_PTCR_RXTEN (0x1u << 0) /**< \brief (PERIPH_PTCR) Receiver Transfer Enable */ +#define PERIPH_PTCR_RXTDIS (0x1u << 1) /**< \brief (PERIPH_PTCR) Receiver Transfer Disable */ +#define PERIPH_PTCR_TXTEN (0x1u << 8) /**< \brief (PERIPH_PTCR) Transmitter Transfer Enable */ +#define PERIPH_PTCR_TXTDIS (0x1u << 9) /**< \brief (PERIPH_PTCR) Transmitter Transfer Disable */ +/* -------- PERIPH_PTSR : (PDC Offset: 0x24) Transfer Status Register -------- */ +#define PERIPH_PTSR_RXTEN (0x1u << 0) /**< \brief (PERIPH_PTSR) Receiver Transfer Enable */ +#define PERIPH_PTSR_TXTEN (0x1u << 8) /**< \brief (PERIPH_PTSR) Transmitter Transfer Enable */ + +/*@}*/ + + +#endif /* _SAM3U_PDC_COMPONENT_ */