Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.
Upstream: https://github.com/ARMmbed/DAPLink
source/family/st/stm32f407ve/flash_blob.c
- Committer:
- Pawel Zarembski
- Date:
- 2020-04-07
- Revision:
- 0:01f31e923fe2
File content as of revision 0:01f31e923fe2:
/** * @file flash_blob.c * @brief Flash algorithm for the stm32f407 * * DAPLink Interface Firmware * Copyright (c) 2009-2019, ARM Limited, All Rights Reserved * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include "flash_blob.h" static const uint32_t stm32f4xx_512_flash_prog_blob[] = { 0xE00ABE00, 0x062D780D, 0x24084068, 0xD3000040, 0x1E644058, 0x1C49D1FA, 0x2A001E52, 0x4770D1F2, 0xf3c04601, 0x28203007, 0x2204bf24, 0x1050eb02, 0x2810d205, 0x2203bf26, 0x1010eb02, 0xf4110880, 0xbf181f80, 0x0010f040, 0x486b4770, 0x60014969, 0x6001496a, 0x6801486a, 0x01f0f041, 0x48696001, 0xf0106800, 0xd1080f20, 0xf2454867, 0x60015155, 0x60412106, 0x71fff640, 0x20006081, 0x49634770, 0xf4206808, 0x600a52f8, 0x48616008, 0xf0416801, 0x60014100, 0x47702000, 0xc174f8df, 0x0000f8dc, 0x0004f040, 0x0000f8cc, 0x0000f8dc, 0x3080f440, 0x0000f8cc, 0x0004f1ac, 0xf4116801, 0xbf1c3f80, 0x21aaf64a, 0xd0044a50, 0x68036011, 0x3f80f413, 0xf8dcd1fa, 0xf0200000, 0xf8cc0004, 0x20000000, 0xf3c04770, 0x29203107, 0x2204bf24, 0x1151eb02, 0x2910d205, 0x2203bf26, 0x1111eb02, 0xf4100889, 0xbf181f80, 0x0110f041, 0x6802483d, 0x02f0f042, 0xf1006002, 0x22020c04, 0x2000f8cc, 0x2000f8dc, 0xea0323f8, 0x431101c1, 0x1000f8cc, 0x1000f8dc, 0x3180f441, 0x1000f8cc, 0xf4116801, 0xbf1c3f80, 0x21aaf64a, 0xd0044a30, 0x68036011, 0x3f80f413, 0xf8dcd1fa, 0xf0211000, 0xf8cc0102, 0x68011000, 0x0ff0f011, 0x2000bf04, 0x68014770, 0x01f0f041, 0x20016001, 0x4b224770, 0x1cc9b430, 0xc000f8d3, 0x0103f031, 0x0cf0f04c, 0xc000f8c3, 0x0404f103, 0x0c00f04f, 0xc000f8c4, 0xf240bf18, 0xd0252501, 0xc000f8d4, 0x0c05ea4c, 0xc000f8c4, 0xc000f8d2, 0xc000f8c0, 0xc000f8d3, 0x3f80f41c, 0xf8d4d1fa, 0xf02cc000, 0xf8c40c01, 0xf8d3c000, 0xf01cc000, 0xd0060ff0, 0xf0406818, 0x601800f0, 0x2001bc30, 0x1d004770, 0xf1021f09, 0xd1d90204, 0x2000bc30, 0x00004770, 0x45670123, 0x40023c04, 0xcdef89ab, 0x40023c0c, 0x40023c14, 0x40003000, 0x40023c00, 0x40023c10, 0x00000000 }; // Start address of flash static const uint32_t flash_start = 0x08000000; // Size of flash static const uint32_t flash_size = 0x00080000; /** * List of start and size for each size of flash sector - even indexes are start, odd are size * The size will apply to all sectors between the listed address and the next address * in the list. * The last pair in the list will have sectors starting at that address and ending * at address flash_start + flash_size. */ static const sector_info_t sectors_info[] = { { 0x08000000, 0x00004000 }, { 0x08010000, 0x00010000 }, { 0x08020000, 0x00020000 }, }; static const program_target_t flash = { 0x2000004b, // Init 0x2000007f, // UnInit 0x20000099, // EraseChip 0x200000e3, // EraseSector 0x20000177, // ProgramPage 0, // Verify // BKPT : start of blob + 1 // RSB : blob start + header + rw data offset // RSP : stack pointer { 0x20000001, 0x20000214, 0x20002000 }, 0x20000000 + 0x00000A00, // mem buffer location 0x20000000, // location to write prog_blob in target RAM sizeof(stm32f4xx_512_flash_prog_blob), // prog_blob size stm32f4xx_512_flash_prog_blob, // address of prog_blob 0x00000400 // ram_to_flash_bytes_to_be_written };