Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.

Upstream: https://github.com/ARMmbed/DAPLink

Revision:
0:01f31e923fe2
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/source/family/st/stm32f407ve/flash_blob.c	Tue Apr 07 12:55:42 2020 +0200
@@ -0,0 +1,84 @@
+/**
+ * @file    flash_blob.c
+ * @brief   Flash algorithm for the stm32f407
+ *
+ * DAPLink Interface Firmware
+ * Copyright (c) 2009-2019, ARM Limited, All Rights Reserved
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "flash_blob.h"
+
+static const uint32_t stm32f4xx_512_flash_prog_blob[] = {
+    0xE00ABE00, 0x062D780D, 0x24084068, 0xD3000040, 0x1E644058, 0x1C49D1FA, 0x2A001E52, 0x4770D1F2,
+    0xf3c04601, 0x28203007, 0x2204bf24, 0x1050eb02, 0x2810d205, 0x2203bf26, 0x1010eb02, 0xf4110880,
+    0xbf181f80, 0x0010f040, 0x486b4770, 0x60014969, 0x6001496a, 0x6801486a, 0x01f0f041, 0x48696001,
+    0xf0106800, 0xd1080f20, 0xf2454867, 0x60015155, 0x60412106, 0x71fff640, 0x20006081, 0x49634770,
+    0xf4206808, 0x600a52f8, 0x48616008, 0xf0416801, 0x60014100, 0x47702000, 0xc174f8df, 0x0000f8dc,
+    0x0004f040, 0x0000f8cc, 0x0000f8dc, 0x3080f440, 0x0000f8cc, 0x0004f1ac, 0xf4116801, 0xbf1c3f80,
+    0x21aaf64a, 0xd0044a50, 0x68036011, 0x3f80f413, 0xf8dcd1fa, 0xf0200000, 0xf8cc0004, 0x20000000,
+    0xf3c04770, 0x29203107, 0x2204bf24, 0x1151eb02, 0x2910d205, 0x2203bf26, 0x1111eb02, 0xf4100889,
+    0xbf181f80, 0x0110f041, 0x6802483d, 0x02f0f042, 0xf1006002, 0x22020c04, 0x2000f8cc, 0x2000f8dc,
+    0xea0323f8, 0x431101c1, 0x1000f8cc, 0x1000f8dc, 0x3180f441, 0x1000f8cc, 0xf4116801, 0xbf1c3f80,
+    0x21aaf64a, 0xd0044a30, 0x68036011, 0x3f80f413, 0xf8dcd1fa, 0xf0211000, 0xf8cc0102, 0x68011000,
+    0x0ff0f011, 0x2000bf04, 0x68014770, 0x01f0f041, 0x20016001, 0x4b224770, 0x1cc9b430, 0xc000f8d3,
+    0x0103f031, 0x0cf0f04c, 0xc000f8c3, 0x0404f103, 0x0c00f04f, 0xc000f8c4, 0xf240bf18, 0xd0252501,
+    0xc000f8d4, 0x0c05ea4c, 0xc000f8c4, 0xc000f8d2, 0xc000f8c0, 0xc000f8d3, 0x3f80f41c, 0xf8d4d1fa,
+    0xf02cc000, 0xf8c40c01, 0xf8d3c000, 0xf01cc000, 0xd0060ff0, 0xf0406818, 0x601800f0, 0x2001bc30,
+    0x1d004770, 0xf1021f09, 0xd1d90204, 0x2000bc30, 0x00004770, 0x45670123, 0x40023c04, 0xcdef89ab,
+    0x40023c0c, 0x40023c14, 0x40003000, 0x40023c00, 0x40023c10, 0x00000000
+};
+
+// Start address of flash
+static const uint32_t flash_start = 0x08000000;
+// Size of flash
+static const uint32_t flash_size = 0x00080000;
+
+/**
+* List of start and size for each size of flash sector - even indexes are start, odd are size
+* The size will apply to all sectors between the listed address and the next address
+* in the list.
+* The last pair in the list will have sectors starting at that address and ending
+* at address flash_start + flash_size.
+*/
+static const sector_info_t sectors_info[] = {
+    { 0x08000000, 0x00004000 },
+    { 0x08010000, 0x00010000 },
+    { 0x08020000, 0x00020000 },
+};
+
+static const program_target_t flash = {
+    0x2000004b, // Init
+    0x2000007f, // UnInit
+    0x20000099, // EraseChip
+    0x200000e3, // EraseSector
+    0x20000177, // ProgramPage
+    0,          // Verify
+
+    // BKPT : start of blob + 1
+    // RSB  : blob start + header + rw data offset
+    // RSP  : stack pointer
+    {
+        0x20000001,
+        0x20000214,
+        0x20002000
+    },
+
+    0x20000000 + 0x00000A00,  // mem buffer location
+    0x20000000,               // location to write prog_blob in target RAM
+    sizeof(stm32f4xx_512_flash_prog_blob),   // prog_blob size
+    stm32f4xx_512_flash_prog_blob,           // address of prog_blob
+    0x00000400       // ram_to_flash_bytes_to_be_written
+};