Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.

Upstream: https://github.com/ARMmbed/DAPLink

Revision:
0:01f31e923fe2
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/source/hic_hal/atmel/sam3u2c/instance/rtc.h	Tue Apr 07 12:55:42 2020 +0200
@@ -0,0 +1,64 @@
+/* ---------------------------------------------------------------------------- */
+/*                  Atmel Microcontroller Software Support                      */
+/*                       SAM Software Package License                           */
+/* ---------------------------------------------------------------------------- */
+/* Copyright (c) %copyright_year%, Atmel Corporation                                        */
+/*                                                                              */
+/* All rights reserved.                                                         */
+/*                                                                              */
+/* Redistribution and use in source and binary forms, with or without           */
+/* modification, are permitted provided that the following condition is met:    */
+/*                                                                              */
+/* - Redistributions of source code must retain the above copyright notice,     */
+/* this list of conditions and the disclaimer below.                            */
+/*                                                                              */
+/* Atmel's name may not be used to endorse or promote products derived from     */
+/* this software without specific prior written permission.                     */
+/*                                                                              */
+/* DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR   */
+/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
+/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE   */
+/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,      */
+/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
+/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,  */
+/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    */
+/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING         */
+/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
+/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                           */
+/* ---------------------------------------------------------------------------- */
+
+#ifndef _SAM3U_RTC_INSTANCE_
+#define _SAM3U_RTC_INSTANCE_
+
+/* ========== Register definition for RTC peripheral ========== */
+#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+#define REG_RTC_CR              (0x400E1260U) /**< \brief (RTC) Control Register */
+#define REG_RTC_MR              (0x400E1264U) /**< \brief (RTC) Mode Register */
+#define REG_RTC_TIMR            (0x400E1268U) /**< \brief (RTC) Time Register */
+#define REG_RTC_CALR            (0x400E126CU) /**< \brief (RTC) Calendar Register */
+#define REG_RTC_TIMALR          (0x400E1270U) /**< \brief (RTC) Time Alarm Register */
+#define REG_RTC_CALALR          (0x400E1274U) /**< \brief (RTC) Calendar Alarm Register */
+#define REG_RTC_SR              (0x400E1278U) /**< \brief (RTC) Status Register */
+#define REG_RTC_SCCR            (0x400E127CU) /**< \brief (RTC) Status Clear Command Register */
+#define REG_RTC_IER             (0x400E1280U) /**< \brief (RTC) Interrupt Enable Register */
+#define REG_RTC_IDR             (0x400E1284U) /**< \brief (RTC) Interrupt Disable Register */
+#define REG_RTC_IMR             (0x400E1288U) /**< \brief (RTC) Interrupt Mask Register */
+#define REG_RTC_VER             (0x400E128CU) /**< \brief (RTC) Valid Entry Register */
+#define REG_RTC_WPMR            (0x400E1344U) /**< \brief (RTC) Write Protect Mode Register */
+#else
+#define REG_RTC_CR     (*(RwReg*)0x400E1260U) /**< \brief (RTC) Control Register */
+#define REG_RTC_MR     (*(RwReg*)0x400E1264U) /**< \brief (RTC) Mode Register */
+#define REG_RTC_TIMR   (*(RwReg*)0x400E1268U) /**< \brief (RTC) Time Register */
+#define REG_RTC_CALR   (*(RwReg*)0x400E126CU) /**< \brief (RTC) Calendar Register */
+#define REG_RTC_TIMALR (*(RwReg*)0x400E1270U) /**< \brief (RTC) Time Alarm Register */
+#define REG_RTC_CALALR (*(RwReg*)0x400E1274U) /**< \brief (RTC) Calendar Alarm Register */
+#define REG_RTC_SR     (*(RoReg*)0x400E1278U) /**< \brief (RTC) Status Register */
+#define REG_RTC_SCCR   (*(WoReg*)0x400E127CU) /**< \brief (RTC) Status Clear Command Register */
+#define REG_RTC_IER    (*(WoReg*)0x400E1280U) /**< \brief (RTC) Interrupt Enable Register */
+#define REG_RTC_IDR    (*(WoReg*)0x400E1284U) /**< \brief (RTC) Interrupt Disable Register */
+#define REG_RTC_IMR    (*(RoReg*)0x400E1288U) /**< \brief (RTC) Interrupt Mask Register */
+#define REG_RTC_VER    (*(RoReg*)0x400E128CU) /**< \brief (RTC) Valid Entry Register */
+#define REG_RTC_WPMR   (*(RwReg*)0x400E1344U) /**< \brief (RTC) Write Protect Mode Register */
+#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#endif /* _SAM3U_RTC_INSTANCE_ */