Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.

Upstream: https://github.com/ARMmbed/DAPLink

Revision:
0:01f31e923fe2
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/source/hic_hal/atmel/sam3u2c/instance/pioc.h	Tue Apr 07 12:55:42 2020 +0200
@@ -0,0 +1,124 @@
+/* ---------------------------------------------------------------------------- */
+/*                  Atmel Microcontroller Software Support                      */
+/*                       SAM Software Package License                           */
+/* ---------------------------------------------------------------------------- */
+/* Copyright (c) %copyright_year%, Atmel Corporation                                        */
+/*                                                                              */
+/* All rights reserved.                                                         */
+/*                                                                              */
+/* Redistribution and use in source and binary forms, with or without           */
+/* modification, are permitted provided that the following condition is met:    */
+/*                                                                              */
+/* - Redistributions of source code must retain the above copyright notice,     */
+/* this list of conditions and the disclaimer below.                            */
+/*                                                                              */
+/* Atmel's name may not be used to endorse or promote products derived from     */
+/* this software without specific prior written permission.                     */
+/*                                                                              */
+/* DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR   */
+/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
+/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE   */
+/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,      */
+/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
+/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,  */
+/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    */
+/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING         */
+/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
+/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                           */
+/* ---------------------------------------------------------------------------- */
+
+#ifndef _SAM3U_PIOC_INSTANCE_
+#define _SAM3U_PIOC_INSTANCE_
+
+/* ========== Register definition for PIOC peripheral ========== */
+#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+#define REG_PIOC_PER             (0x400E1000U) /**< \brief (PIOC) PIO Enable Register */
+#define REG_PIOC_PDR             (0x400E1004U) /**< \brief (PIOC) PIO Disable Register */
+#define REG_PIOC_PSR             (0x400E1008U) /**< \brief (PIOC) PIO Status Register */
+#define REG_PIOC_OER             (0x400E1010U) /**< \brief (PIOC) Output Enable Register */
+#define REG_PIOC_ODR             (0x400E1014U) /**< \brief (PIOC) Output Disable Register */
+#define REG_PIOC_OSR             (0x400E1018U) /**< \brief (PIOC) Output Status Register */
+#define REG_PIOC_IFER            (0x400E1020U) /**< \brief (PIOC) Glitch Input Filter Enable Register */
+#define REG_PIOC_IFDR            (0x400E1024U) /**< \brief (PIOC) Glitch Input Filter Disable Register */
+#define REG_PIOC_IFSR            (0x400E1028U) /**< \brief (PIOC) Glitch Input Filter Status Register */
+#define REG_PIOC_SODR            (0x400E1030U) /**< \brief (PIOC) Set Output Data Register */
+#define REG_PIOC_CODR            (0x400E1034U) /**< \brief (PIOC) Clear Output Data Register */
+#define REG_PIOC_ODSR            (0x400E1038U) /**< \brief (PIOC) Output Data Status Register */
+#define REG_PIOC_PDSR            (0x400E103CU) /**< \brief (PIOC) Pin Data Status Register */
+#define REG_PIOC_IER             (0x400E1040U) /**< \brief (PIOC) Interrupt Enable Register */
+#define REG_PIOC_IDR             (0x400E1044U) /**< \brief (PIOC) Interrupt Disable Register */
+#define REG_PIOC_IMR             (0x400E1048U) /**< \brief (PIOC) Interrupt Mask Register */
+#define REG_PIOC_ISR             (0x400E104CU) /**< \brief (PIOC) Interrupt Status Register */
+#define REG_PIOC_MDER            (0x400E1050U) /**< \brief (PIOC) Multi-driver Enable Register */
+#define REG_PIOC_MDDR            (0x400E1054U) /**< \brief (PIOC) Multi-driver Disable Register */
+#define REG_PIOC_MDSR            (0x400E1058U) /**< \brief (PIOC) Multi-driver Status Register */
+#define REG_PIOC_PUDR            (0x400E1060U) /**< \brief (PIOC) Pull-up Disable Register */
+#define REG_PIOC_PUER            (0x400E1064U) /**< \brief (PIOC) Pull-up Enable Register */
+#define REG_PIOC_PUSR            (0x400E1068U) /**< \brief (PIOC) Pad Pull-up Status Register */
+#define REG_PIOC_ABSR            (0x400E1070U) /**< \brief (PIOC) Peripheral AB Select Register */
+#define REG_PIOC_SCIFSR          (0x400E1080U) /**< \brief (PIOC) System Clock Glitch Input Filter Select Register */
+#define REG_PIOC_DIFSR           (0x400E1084U) /**< \brief (PIOC) Debouncing Input Filter Select Register */
+#define REG_PIOC_IFDGSR          (0x400E1088U) /**< \brief (PIOC) Glitch or Debouncing Input Filter Clock Selection Status Register */
+#define REG_PIOC_SCDR            (0x400E108CU) /**< \brief (PIOC) Slow Clock Divider Debouncing Register */
+#define REG_PIOC_OWER            (0x400E10A0U) /**< \brief (PIOC) Output Write Enable */
+#define REG_PIOC_OWDR            (0x400E10A4U) /**< \brief (PIOC) Output Write Disable */
+#define REG_PIOC_OWSR            (0x400E10A8U) /**< \brief (PIOC) Output Write Status Register */
+#define REG_PIOC_AIMER           (0x400E10B0U) /**< \brief (PIOC) Additional Interrupt Modes Enable Register */
+#define REG_PIOC_AIMDR           (0x400E10B4U) /**< \brief (PIOC) Additional Interrupt Modes Disables Register */
+#define REG_PIOC_AIMMR           (0x400E10B8U) /**< \brief (PIOC) Additional Interrupt Modes Mask Register */
+#define REG_PIOC_ESR             (0x400E10C0U) /**< \brief (PIOC) Edge Select Register */
+#define REG_PIOC_LSR             (0x400E10C4U) /**< \brief (PIOC) Level Select Register */
+#define REG_PIOC_ELSR            (0x400E10C8U) /**< \brief (PIOC) Edge/Level Status Register */
+#define REG_PIOC_FELLSR          (0x400E10D0U) /**< \brief (PIOC) Falling Edge/Low Level Select Register */
+#define REG_PIOC_REHLSR          (0x400E10D4U) /**< \brief (PIOC) Rising Edge/ High Level Select Register */
+#define REG_PIOC_FRLHSR          (0x400E10D8U) /**< \brief (PIOC) Fall/Rise - Low/High Status Register */
+#define REG_PIOC_LOCKSR          (0x400E10E0U) /**< \brief (PIOC) Lock Status */
+#define REG_PIOC_WPMR            (0x400E10E4U) /**< \brief (PIOC) Write Protect Mode Register */
+#define REG_PIOC_WPSR            (0x400E10E8U) /**< \brief (PIOC) Write Protect Status Register */
+#else
+#define REG_PIOC_PER    (*(WoReg*)0x400E1000U) /**< \brief (PIOC) PIO Enable Register */
+#define REG_PIOC_PDR    (*(WoReg*)0x400E1004U) /**< \brief (PIOC) PIO Disable Register */
+#define REG_PIOC_PSR    (*(RoReg*)0x400E1008U) /**< \brief (PIOC) PIO Status Register */
+#define REG_PIOC_OER    (*(WoReg*)0x400E1010U) /**< \brief (PIOC) Output Enable Register */
+#define REG_PIOC_ODR    (*(WoReg*)0x400E1014U) /**< \brief (PIOC) Output Disable Register */
+#define REG_PIOC_OSR    (*(RoReg*)0x400E1018U) /**< \brief (PIOC) Output Status Register */
+#define REG_PIOC_IFER   (*(WoReg*)0x400E1020U) /**< \brief (PIOC) Glitch Input Filter Enable Register */
+#define REG_PIOC_IFDR   (*(WoReg*)0x400E1024U) /**< \brief (PIOC) Glitch Input Filter Disable Register */
+#define REG_PIOC_IFSR   (*(RoReg*)0x400E1028U) /**< \brief (PIOC) Glitch Input Filter Status Register */
+#define REG_PIOC_SODR   (*(WoReg*)0x400E1030U) /**< \brief (PIOC) Set Output Data Register */
+#define REG_PIOC_CODR   (*(WoReg*)0x400E1034U) /**< \brief (PIOC) Clear Output Data Register */
+#define REG_PIOC_ODSR   (*(RwReg*)0x400E1038U) /**< \brief (PIOC) Output Data Status Register */
+#define REG_PIOC_PDSR   (*(RoReg*)0x400E103CU) /**< \brief (PIOC) Pin Data Status Register */
+#define REG_PIOC_IER    (*(WoReg*)0x400E1040U) /**< \brief (PIOC) Interrupt Enable Register */
+#define REG_PIOC_IDR    (*(WoReg*)0x400E1044U) /**< \brief (PIOC) Interrupt Disable Register */
+#define REG_PIOC_IMR    (*(RoReg*)0x400E1048U) /**< \brief (PIOC) Interrupt Mask Register */
+#define REG_PIOC_ISR    (*(RoReg*)0x400E104CU) /**< \brief (PIOC) Interrupt Status Register */
+#define REG_PIOC_MDER   (*(WoReg*)0x400E1050U) /**< \brief (PIOC) Multi-driver Enable Register */
+#define REG_PIOC_MDDR   (*(WoReg*)0x400E1054U) /**< \brief (PIOC) Multi-driver Disable Register */
+#define REG_PIOC_MDSR   (*(RoReg*)0x400E1058U) /**< \brief (PIOC) Multi-driver Status Register */
+#define REG_PIOC_PUDR   (*(WoReg*)0x400E1060U) /**< \brief (PIOC) Pull-up Disable Register */
+#define REG_PIOC_PUER   (*(WoReg*)0x400E1064U) /**< \brief (PIOC) Pull-up Enable Register */
+#define REG_PIOC_PUSR   (*(RoReg*)0x400E1068U) /**< \brief (PIOC) Pad Pull-up Status Register */
+#define REG_PIOC_ABSR   (*(RwReg*)0x400E1070U) /**< \brief (PIOC) Peripheral AB Select Register */
+#define REG_PIOC_SCIFSR (*(WoReg*)0x400E1080U) /**< \brief (PIOC) System Clock Glitch Input Filter Select Register */
+#define REG_PIOC_DIFSR  (*(WoReg*)0x400E1084U) /**< \brief (PIOC) Debouncing Input Filter Select Register */
+#define REG_PIOC_IFDGSR (*(RoReg*)0x400E1088U) /**< \brief (PIOC) Glitch or Debouncing Input Filter Clock Selection Status Register */
+#define REG_PIOC_SCDR   (*(RwReg*)0x400E108CU) /**< \brief (PIOC) Slow Clock Divider Debouncing Register */
+#define REG_PIOC_OWER   (*(WoReg*)0x400E10A0U) /**< \brief (PIOC) Output Write Enable */
+#define REG_PIOC_OWDR   (*(WoReg*)0x400E10A4U) /**< \brief (PIOC) Output Write Disable */
+#define REG_PIOC_OWSR   (*(RoReg*)0x400E10A8U) /**< \brief (PIOC) Output Write Status Register */
+#define REG_PIOC_AIMER  (*(WoReg*)0x400E10B0U) /**< \brief (PIOC) Additional Interrupt Modes Enable Register */
+#define REG_PIOC_AIMDR  (*(WoReg*)0x400E10B4U) /**< \brief (PIOC) Additional Interrupt Modes Disables Register */
+#define REG_PIOC_AIMMR  (*(RoReg*)0x400E10B8U) /**< \brief (PIOC) Additional Interrupt Modes Mask Register */
+#define REG_PIOC_ESR    (*(WoReg*)0x400E10C0U) /**< \brief (PIOC) Edge Select Register */
+#define REG_PIOC_LSR    (*(WoReg*)0x400E10C4U) /**< \brief (PIOC) Level Select Register */
+#define REG_PIOC_ELSR   (*(RoReg*)0x400E10C8U) /**< \brief (PIOC) Edge/Level Status Register */
+#define REG_PIOC_FELLSR (*(WoReg*)0x400E10D0U) /**< \brief (PIOC) Falling Edge/Low Level Select Register */
+#define REG_PIOC_REHLSR (*(WoReg*)0x400E10D4U) /**< \brief (PIOC) Rising Edge/ High Level Select Register */
+#define REG_PIOC_FRLHSR (*(RoReg*)0x400E10D8U) /**< \brief (PIOC) Fall/Rise - Low/High Status Register */
+#define REG_PIOC_LOCKSR (*(RoReg*)0x400E10E0U) /**< \brief (PIOC) Lock Status */
+#define REG_PIOC_WPMR   (*(RwReg*)0x400E10E4U) /**< \brief (PIOC) Write Protect Mode Register */
+#define REG_PIOC_WPSR   (*(RoReg*)0x400E10E8U) /**< \brief (PIOC) Write Protect Status Register */
+#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#endif /* _SAM3U_PIOC_INSTANCE_ */