Diff: main.cpp

Revision:

2:bcf033cefa0e

Parent:

1:fd5a598caa32

--- a/main.cpp	Thu May 23 14:39:11 2019 +0000
+++ b/main.cpp	Thu Jul 25 15:25:24 2019 +0000
@@ -1,70 +1,220 @@
 #include "mbed.h"
-#include "flow.h"
+#include "pressure.h"
 #include "TextLCD.h"
+#include "time.h"
 
-Serial ttl(PA_0, PA_1);
+/////////////////////////
+// User has to hold his breath for 5 second at a correct amount of pressure
+// There is an indicator on the LCD which shows the acceptable boundaries 
+///////////////////////
+
+//Serial ttl(PA_0, PA_1);
 PwmOut led(PB_6);
 TextLCD lcd(PC_8,PC_6,PB_15,PB_14,PB_13,PB_12, TextLCD::LCD16x2);
+Timeout t;
+
+int flag1;
+float sample2=0;
+float sample1;
+float delta;
+float sample0;
+float delta2;
+float sample3;
+float sample4;
+float delta3;
+int error1;
+int error2;
+int U;
+
+//  
+
+void okmsg() {
+    lcd.locate(6,0);
+    lcd.printf("well done");
+    flag1=0;
+}  
+       void one() {
+       printf("1...\n");
+       t.attach(&okmsg, 1.0);
+       }
+       void two() {
+    lcd.locate(6,0);
+    lcd.printf("hold: 2s ");
+       t.attach(&one, 1.0);
+       }
+        void three() {
+       lcd.locate(6,0);
+    lcd.printf("hold: 3s ");
+       t.attach(&two, 1.0);
+       }
+       void four() {
+       lcd.locate(6,0);
+    lcd.printf("hold: 4s ");
+       t.attach(&three, 1.0);
+       }
+        void five() {
+       lcd.locate(6,0);
+    lcd.printf("hold: 5s ");
+       t.attach(&four, 1.0);
+       }
+         void six() {
+       lcd.locate(6,0);
+    lcd.printf("hold: 6s ");
+       t.attach(&five, 1.0);
+       }
+
+   void counting() {
+    six();
+}     
+
+void RED1() {
+            
+// At the "Situation 0", which is before breathing into the device, 
+// we reset everything and ask user to start breathing, set the brightness
+// of the LED to the lowest, and detach the timer
+
+            sample0=0;
+            sample2=0;
+            sample1=0;
+            sample4=0;
+            error1=0;
+            error2=0;
+            flag1=0;
+            U=0;
+            lcd.locate(0,1);
+            lcd.printf("Start Breathing ");
+            led.write(0.20f);
+            t.detach();
+                }
+                
+    void Harder(){
+        if (delta2>0 and error1==0) 
+        {
+                t.detach();
+                sample0=0;
+                sample2=0;
+                sample1=0;
+                error1=1; 
+                U=1; //This means that the program is now ready to have the breath in the standard boundaries.
+         }
+                }
+ 
+
 
 
 int main()
 {  
 
+    pressure();
     flow();
-    ttl.baud(9600);
-    
+    //ttl.baud(9600);
+    //first we clear lcd
     lcd.cls();
-    wait(0.001);
-    lcd.locate(3,0);
+    //then we define the location to start showing characters from there
+    lcd.locate(2,0);    //column [0 to 15] , row [0,1] : in first row at the 2nd column I put the first line,
+    lcd.printf("|");    //to show the first acceptable boundary.
+    lcd.locate(3,0);    //in the same row, 3rd column, I put the second boundary.
     lcd.printf("|");
-    lcd.locate(4,0);
-    lcd.printf("|");
+    //lcd.locate(0,1);
+    //lcd.printf("breathe");
     
-    
+   int ft=0;
     while(1) {
      
-     lcd.locate(8,0);
-    lcd.printf("f: %f\n", finalflow);
+     //lcd.locate(8,0);
+   printf("f: %3.2f\n", flow());
      
-        //ttl.printf("flow: %f\n", finalflow);
-        if (flow()<0.4)
+       // ttl.printf("flow: %f\n", flow());
+       
+       //we're making comparasion using pressure because it was more reliable than flow
+       
+        //////////////////       SITUATION 0: Before Breathing
+        if (pressure()<180.32)
+        {
+            //calls the following funtion which is defined before the main while loop:
+            RED1();
+        }
+        
+        
+        //////////////////       SITUATION 1: Starts Breathing
+        if (pressure()>=180.32 and pressure()<200)
         {
+            sample0=pressure();
+            delta2=sample1-sample0;
+        //Naturally, at the beginning, the breath level goes to the situation 1 before situation 2
+        //so we need to enable a flag called U at the following called function
+        //so it means that the code is ready for the next stage:
+            Harder();
             lcd.locate(0,1);
-            lcd.printf("*     ");
-            led.write(0.00f);
+            lcd.printf("** OK           ");
+            led.write(0.20f);
         }
-        if (flow()>=0.4 and flow()<1.5)
+        
+        //////////////////       SITUATION 2: Standard level
+        if (pressure()>=200 and pressure()<208.44)
+        {
+            sample1=pressure();
+           delta=sample2-sample1;
+           
+        //If breath level has already reached the previous situation and now is in this situation,
+        //then it is in a standard level and user has to keep it for 5 seconds
+      
+           if (U==1){
+               //the following function activates a series of 7 other functions respectively.
+               counting();
+               U=0;
+               }
+           if (flag1==0 and delta < 0)
+                {
+                    flag1=1; 
+                    //the following function activates a series of 7 other functions respectively.   
+                    counting(); 
+                }
+            lcd.locate(0,1);
+            lcd.printf("***  Good      ");
+            led.write(0.40f);
+        }
+    
+        //////////////////       SITUATION 3: Perfect level
+        if (pressure()>=208.44 and pressure()<238.48)
         {
             lcd.locate(0,1);
-            lcd.printf("**    ");
-            led.write(0.20f);
-        }
-        if (flow()>=1.5 and flow()<2.7)
-        {
-            lcd.locate(0,1);
-            lcd.printf("***   ");
-            led.write(0.40f);
+            lcd.printf("**** Perfect    ");
+            led.write(0.60f);
+            sample2=pressure();
         }
-        if (flow()>=2.7 and flow()<3)
+
+        //////////////////       SITUATION 4: Standard level
+        if (pressure()>=238.248 and pressure()<270.55)
         {
+            sample3=pressure();
+           delta3=sample4-sample3;
+           if(delta3>0){
+            counting();
+            sample4=0;
+            }
             lcd.locate(0,1);
-            lcd.printf("****  ");
-            led.write(0.60f);
-        }
-        if (flow()>=3 and flow()<3.3)
-        {
-            lcd.locate(0,1);
-            lcd.printf("***** ");
+            lcd.printf("***** Good      ");
             led.write(0.80f);
         }
-        if (flow()>=3.3)
+
+        //////////////////       SITUATION 5: Too hard level
+        if (pressure()>=270.55)
         {
+            sample4=pressure();
+            if (error2==0){
+            sample0=0;
+            sample2=0;
+            sample1=0;    
+            t.detach();
+            error2=1; 
+            }
             lcd.locate(0,1);
-            lcd.printf("******");
+            lcd.printf("Breathe softer  ");
             led.write(1.00f);
         }
    // lcd.printf("%f\n", flow());
-    wait (0.2);
+    wait (0.1);
                 
     }
 }