Mbed OS Reference | pca20020.h Source File

 /**
  * Copyright (c) 2017 - 2019, Nordic Semiconductor ASA
  *
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *
  * 1. Redistributions of source code must retain the above copyright notice, this
  *    list of conditions and the following disclaimer.
  *
  * 2. Redistributions in binary form, except as embedded into a Nordic
  *    Semiconductor ASA integrated circuit in a product or a software update for
  *    such product, must reproduce the above copyright notice, this list of
  *    conditions and the following disclaimer in the documentation and/or other
  *    materials provided with the distribution.
  *
  * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
  *    contributors may be used to endorse or promote products derived from this
  *    software without specific prior written permission.
  *
  * 4. This software, with or without modification, must only be used with a
  *    Nordic Semiconductor ASA integrated circuit.
  *
  * 5. Any software provided in binary form under this license must not be reverse
  *    engineered, decompiled, modified and/or disassembled.
  *
  * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
  * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
  * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
  * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  */
 #ifndef PCA20020_H
 #define PCA20020_H
 
 #ifdef __cplusplus
 extern "C" {
 #endif
 
 #include "nrf_gpio.h"
 
 #define NRF_NUM_GPIO_PINS        32
 
 #define OSC_XL1                  0
 #define OSC_XL2                  1
 #define ANA_DIG0                 2
 #define ANA_DIG1                 3
 #define ANA_DIG2                 4
 #define IOEXT_OSCIO              5
 #define MPU_INT                  6
 #define TWI_SDA                  7
 #define TWI_SCL                  8
 #define NFC1                     9
 #define NFC2                     10
 #define BUTTON                   11
 #define LIS_INT1                 12
 #define USB_DETECT               13
 #define TWI_SDA_EXT              14
 #define TWI_SCL_EXT              15
 #define SX_RESET                 16
 #define BAT_CHG_STAT             17
 #define MOS_1                    18
 #define MOS_2                    19
 #define MOS_3                    20
 #define MOS_4                    21
 #define CCS_INT                  22
 #define LPS_INT                  23
 #define HTS_INT                  24
 #define MIC_DOUT                 25
 #define MIC_CLK                  26
 #define SPEAKER                  27
 #define BATTERY                  28
 #define SPK_PWR_CTRL             29
 #define VDD_PWR_CTRL             30
 #define BH_INT                   31
 
 // Button config
 #define BUTTONS_NUMBER           1
 #define BUTTON_START             BUTTON
 #define BUTTON_STOP              BUTTON
 #define BUTTON_PULL              NRF_GPIO_PIN_PULLUP
 #define BUTTONS_ACTIVE_STATE     0
 #define BUTTONS_LIST             { BUTTON }
 
 #define LEDS_NUMBER              0
 
 // IO expander pins
 #define SX_IOEXT_NUM_PINS        16
 
 #define SX_IOEXT_0               0
 #define SX_IOEXT_1               1
 #define SX_IOEXT_2               2
 #define SX_IOEXT_3               3
 #define SX_BAT_MON_EN            4
 #define SX_LIGHTWELL_G           5
 #define SX_LIGHTWELL_B           6
 #define SX_LIGHTWELL_R           7
 #define SX_MPU_PWR_CTRL          8
 #define SX_MIC_PWR_CTRL          9
 #define SX_CCS_PWR_CTRL          10
 #define SX_CCS_RESET             11
 #define SX_CCS_WAKE              12
 #define SX_SENSE_LED_R           13
 #define SX_SENSE_LED_G           14
 #define SX_SENSE_LED_B           15
 
 // Uart configuration for testing
 #define RX_PIN_NUMBER            ANA_DIG1
 #define TX_PIN_NUMBER            ANA_DIG0
 #define CTS_PIN_NUMBER           0
 #define RTS_PIN_NUMBER           0
 #define HWFC                     false
 
 
 #ifdef __cplusplus
 }
 #endif
 
 #endif // PCA20020_H
Important Information for this Arm website
