Hostname translation callback (for use with gethostbyname_async()).

Callback will be called after DNS resolution completes or a failure occurs.

Note

Callback should not take more than 10ms to execute, otherwise it might prevent underlying thread processing. A portable user of the callback should not make calls to network operations due to stack size limitations. The callback should not perform expensive operations such as socket recv/send calls or blocking operations.

Parameters

result	NSAPI_ERROR_OK on success, negative error code on failure.
address	On success, destination for the host SocketAddress.

Definition at line 218 of file NetworkInterface.h.

Add a domain name server to list of servers to query.

Parameters

address

Address for the dns host.

Returns

NSAPI_ERROR_OK on success, negative error code on failure.

Implements DNS.

Add event listener for interface.

This API allows multiple callback to be registered for a single interface. When first called, internal list of event handlers are created and registered to interface through attach() API.

Application may only use attach() or add_event_listener() interface. Mixing usage of both leads to undefined behavior.

Parameters

status_cb

The callback for status changes.

Register callback for status reporting.

The specified status callback function is called on the network, and the cellular device status changes. The parameters on the callback are the event type and event type dependent reason parameter.

Remarks

deleting CellularDevice/CellularContext in callback is not allowed.

Allocating/adding lots of traces not recommended as callback is called mostly from State machines thread which is now 2048. You can change to main thread for example via EventQueue.

Parameters

status_cb

The callback for status changes.

Implements CellularContext.

Start the interface.

Attempts to attach the device to cellular network. By default, this API is synchronous. API can be set to asynchronous with method set_blocking(...). In synchronous and asynchronous mode, the application can get result in from callback, which is set with attach(...)

Returns

NSAPI_ERROR_OK on success NSAPI_ERROR_NO_MEMORY on case of memory failure

Implements CellularContext.

Helper method to call callback function if it is provided.

Parameters

status

connection status which is parameter in callback function

The CellularDevice calls the status callback function on status changes on the network or CellularDevice.

Parameters

ev	event type
ptr	event-type dependent reason parameter

Implements CellularContext.

Attempt to connect to a cellular network.

If the SIM requires a PIN, and it is invalid or not set, NSAPI_ERROR_AUTH_ERROR is returned.

Returns

NSAPI_ERROR_OK on success, or negative error code on failure.

Implements CellularContext.

Attempt to connect to a cellular network with a PIN and credentials.

Parameters

sim_pin	PIN for the SIM card.
apn	Access point name (optional).
uname	Username (optional).
pwd	Password (optional).

Returns

NSAPI_ERROR_OK on success, or negative error code on failure.

Implements CellularContext.

Triggers control plane's operations needed when control plane data is received, like socket event, for example.

Stop the interface.

Returns

NSAPI_ERROR_OK on success, or error code on failure.

Implements CellularContext.

Activates PDP context or in PPP mode opens data channel.

Can be overridden by the modem target if 3GPP default implementation if not an option

Reimplemented from CellularContext.

Does the authentication for the PDP Context if user name and password are provided.

Can be overridden by the modem target if 3GPP default implementation if not an option

Returns

NSAPI_ERROR_OK if no credentials provided or authentication was successful NSAPI_ERROR_AUTH_FAILURE if authentication failed NSAPI_ERROR_DEVICE_ERROR if communication with the modemm failed

Return pointer to an EMACInterface.

Returns

Pointer to requested interface type or NULL if this class doesn't implement the interface.

Reimplemented in EMACInterface.

Definition at line 354 of file NetworkInterface.h.

Enable or disable hang-up detection.

When in PPP data pump mode, it is helpful if the FileHandle will signal hang-up via POLLHUP, e.g., if the DCD line is deasserted on a UART. During command mode, this signaling is not desired. enable_hup() controls whether this function should be active.

Implements CellularContext.

Return pointer to an EthInterface.

Returns

Pointer to requested interface type or NULL if this class doesn't implement the interface.

Reimplemented in EthInterface.

Definition at line 320 of file NetworkInterface.h.

Get backoff timer value.

Parameters

backoff_timer

Backoff timer value associated with PDP APN in seconds

Returns

NSAPI_ERROR_OK on success NSAPI_ERROR_PARAMETER if no access point is set or found when activating context NSAPI_ERROR_DEVICE_ERROR on failure

Implements CellularContext.

Getter for at handler.

Common method for all AT-classes.

Returns

reference to ATHandler

Get the pdp context id associated with this context.

Returns

cid

Get the connection status.

Returns

The connection status (

See also

nsapi_types.h).

Reimplemented from NetworkInterface.

Returns the control plane AT command interface.

Implements CellularContext.

Same as NetworkInterface::get_default_instance()

Note

not to be used if get_default_nonip_instance() was already used

Instantiates a default Non-IP cellular interface.

This function creates a new Non-IP PDP context.

Note

not to be used if get_default_instance() was already used

Returns

A Non-IP cellular PDP context

Gets the device error that happened when using AT commands/responses.

This is at error returned by the device. Returned CME/CMS errors can be found from 3gpp documents 27007 and 27005.

Returns

at error (CME/CMS) while communicating with the device

Get the local gateways.

Returns

Null-terminated representation of the local gateway, or null if no network mask has been received.

Implements CellularContext.

Get the network interface name.

Returns

Null-terminated representation of the network interface name or null if interface not exists

Reimplemented in EMACInterface, and L3IPInterface.

Get the local IP address.

Returns

Null-terminated representation of the local IP address, or null if no IP address has been received.

Implements CellularContext.

Get the local MAC address.

Provided MAC address is intended for info or debug purposes and may be not provided if the underlying network interface does not provide a MAC address.

Returns

Null-terminated representation of the local MAC address or null if no MAC address is available.

Reimplemented in InterfaceNanostack, and EMACInterface.

Get the local network mask.

Returns

Null-terminated representation of the local network mask, or null if no network mask has been received.

Implements CellularContext.

Get the relevant information for an active nonsecondary PDP context.

Remarks

optional params are not updated if not received from network.

Parameters

params_list

reference to linked list, which is filled on successful call

Returns

NSAPI_ERROR_OK on success NSAPI_ERROR_NO_MEMORY on memory failure NSAPI_ERROR_DEVICE_ERROR on other failures

Implements CellularContext.

Get value for the given key.

Parameters

key	key for value to be fetched

Returns

property value for the given key. Value type is defined in enum CellularProperty

Get APN rate control.

Remarks

optional params are not updated if not received from network, so use good defaults

Parameters

reports	Additional exception reports at maximum rate reached are allowed to be sent [optional]
time_unit	Uplink time unit with values 0=unrestricted, 1=minute, 2=hour, 3=day, 4=week [optional]
uplink_rate	Maximum number of messages per timeUnit [optional]

Returns

NSAPI_ERROR_OK on success NSAPI_ERROR_DEVICE_ERROR on case of failure

Implements CellularContext.

Get the operation specific timeout.

Used in synchronous mode when setting the maximum waiting time. Modem specific implementation can override this to provide different timeouts.

Parameters

op	current operation

Returns

timeout in milliseconds

Translate a hostname to an IP address with specific version using network interface name.

The hostname may be either a domain name or an IP address. If the hostname is an IP address, no network transactions will be performed.

If no stack-specific DNS resolution is provided, the hostname will be resolve using a UDP socket on the stack.

Parameters

host	Hostname to resolve.
address	Pointer to a SocketAddress to store the result.
version	IP version of address to resolve, NSAPI_UNSPEC indicates version is chosen by the stack (defaults to NSAPI_UNSPEC).
interface_name	Network interface name

Returns

NSAPI_ERROR_OK on success, negative error code on failure.

Implements DNS.

Translate a hostname to an IP address (asynchronous) using network interface name.

The hostname may be either a domain name or a dotted IP address. If the hostname is an IP address, no network transactions will be performed.

If no stack-specific DNS resolution is provided, the hostname will be resolve using a UDP socket on the stack.

Call is non-blocking. Result of the DNS operation is returned by the callback. If this function returns failure, callback will not be called. In case result is success (IP address was found from DNS cache), callback will be called before function returns.

Parameters

host	Hostname to resolve.
callback	Callback that is called for result.
version	IP version of address to resolve, NSAPI_UNSPEC indicates version is chosen by the stack (defaults to NSAPI_UNSPEC).
interface_name	Network interface name

Returns

0 on immediate success, negative error code on immediate failure or a positive unique id that represents the hostname translation operation and can be passed to cancel.

Implements DNS.

Cancel asynchronous hostname translation.

When translation is cancelled, callback will not be called.

Parameters

id	Unique id of the hostname translation operation (returned by gethostbyname_async)

Returns

NSAPI_ERROR_OK on success, negative error code on failure.

Implements DNS.

Check if the connection is currently established.

Returns

true if the cellular module have successfully acquired a carrier and is connected to an external packet data network using PPP, false otherwise.

Implements CellularContext.

Return pointer to a MeshInterface.

Returns

Pointer to requested interface type or NULL if this class doesn't implement the interface.

Reimplemented in MeshInterface.

Definition at line 336 of file NetworkInterface.h.

Start the interface.

Attempts to register the device to cellular network. By default, this API is synchronous. API can be set to asynchronous with method set_blocking(...). In synchronous and asynchronous mode, the application can get result in from callback, which is set with attach(...)

Returns

NSAPI_ERROR_OK on success NSAPI_ERROR_NO_MEMORY on case of memory failure

Implements CellularContext.

Remove event listener from interface.

Remove previously added callback from the handler list.

Parameters

status_cb

The callback to unregister.

Set network interface as default one.

Reimplemented in EMACInterface, and L3IPInterface.

Set the authentication type to be used in user authentication if user name and password are defined.

Parameters

type	enum AuthenticationType

Set asynchronous operation of connect() and disconnect() calls.

By default, interfaces are in synchronous mode which means that connect() or disconnect() blocks until it reach the target state or requested operation fails.

Parameters

blocking

Use true to set NetworkInterface in asynchronous mode.

Returns

NSAPI_ERROR_OK on success

NSAPI_ERROR_UNSUPPORTED if driver does not support asynchronous mode.

negative error code on failure.

Implements CellularContext.

Cellular module need to define an array of cellular properties which defines module supported property values.

Parameters

property_array

array of module properties

Set the cellular network credentials.

Please check documentation of connect() for default behavior of APN settings.

Parameters

apn	Access point name.
uname	Username (optional).
pwd	Password (optional).

Implements CellularContext.

Start the interface.

Initializes the modem for communication. By default, this API is synchronous. API can be set to asynchronous with method set_blocking(...). In synchronous and asynchronous mode application can get result in from callback which is set with attach(...)

Returns

NSAPI_ERROR_OK on success NSAPI_ERROR_NO_MEMORY on case of memory failure

Implements CellularContext.

Enable or disable DHCP on connecting the network.

Enabled by default unless a static IP address has been assigned. Requires that the network is disconnected.

Parameters

dhcp	True to enable DHCP.

Returns

NSAPI_ERROR_OK on success, negative error code on failure.

Reimplemented in EMACInterface, and L3IPInterface.

Set the file handle used to communicate with the modem.

You can use this to change the default file handle.

Parameters

fh	file handle for communicating with the modem

Implements CellularContext.

Set the UART serial used to communicate with the modem.

Can be used to change default file handle. File handle set with this method will use data carrier detect to be able to detect disconnection much faster in PPP mode.

Parameters

serial	UARTSerial used in communication to modem. If null then the default file handle is used.
dcd_pin	Pin used to set data carrier detect on/off for the given UART
active_high	a boolean set to true if DCD polarity is active low

Implements CellularContext.

Configure this network interface to use a static IP address.

Implicitly disables DHCP, which can be enabled in set_dhcp. Requires that the network is disconnected.

Parameters

ip_address	Null-terminated representation of the local IP address
netmask	Null-terminated representation of the local network mask
gateway	Null-terminated representation of the local gateway

Returns

NSAPI_ERROR_OK on success, negative error code on failure

Reimplemented in EMACInterface, and L3IPInterface.

Set the plmn.

PLMN controls to what network device registers.

Parameters

plmn	user to force what network to register.

Implements CellularContext.

Set the PIN code for SIM card.

Parameters

sim_pin

PIN for the SIM card.

Implements CellularContext.

Start the interface.

Attempts to open the SIM. By default, this API is synchronous. API can be set to asynchronous with method set_blocking(...). In synchronous and asynchronous mode, the application can get result in from callback, which is set with attach(...)

Returns

NSAPI_ERROR_OK on success NSAPI_ERROR_NO_MEMORY on case of memory failure

Implements CellularContext.

Return pointer to a WiFiInterface.

Returns

Pointer to requested interface type or NULL if this class doesn't implement the interface.

Reimplemented in WiFiInterface.

Definition at line 328 of file NetworkInterface.h.