Hostname translation callback (for use with gethostbyname_async()).

Callback will be called after DNS resolution completes or a failure occurs.

Note

Callback should not take more than 10ms to execute, otherwise it might prevent underlying thread processing. A portable user of the callback should not make calls to network operations due to stack size limitations. The callback should not perform expensive operations such as socket recv/send calls or blocking operations.

Parameters

result	NSAPI_ERROR_OK on success, negative error code on failure.
address	On success, destination for the host SocketAddress.

Definition at line 218 of file NetworkInterface.h.

Add a domain name server to list of servers to query.

Parameters

address

Address for the dns host.

Returns

NSAPI_ERROR_OK on success, negative error code on failure.

Implements DNS.

Add event listener for interface.

This API allows multiple callback to be registered for a single interface. When first called, internal list of event handlers are created and registered to interface through attach() API.

Application may only use attach() or add_event_listener() interface. Mixing usage of both leads to undefined behavior.

Parameters

status_cb

The callback for status changes.

Register callback for status reporting.

The specified status callback function will be called on status changes on the network. The parameters on the callback are the event type and event-type dependent reason parameter. Only one callback can be registered at a time.

To unregister a callback call with status_cb parameter as a zero.

NOTE: Any callbacks registered with this function will be overwritten if add_event_listener() API is used.

Parameters

status_cb

The callback for status changes.

Reimplemented in CellularContext, EMACInterface, L3IPInterface, InterfaceNanostack, and AT_CellularContext.

Return pointer to a CellularInterface.

Returns

Pointer to requested interface type or NULL if this class doesn't implement the interface.

Deprecated:

CellularBase migrated to CellularInterface - use cellularInterface()

Reimplemented in CellularInterface.

Definition at line 346 of file NetworkInterface.h.

Return pointer to a CellularInterface.

Returns

Pointer to requested interface type or NULL if this class doesn't implement the interface.

Reimplemented in CellularInterface.

Definition at line 423 of file NetworkInterface.h.

Connect to a network.

This blocks until connection is established, but asynchronous operation can be enabled by calling NetworkInterface::set_blocking(false).

In asynchronous mode this starts the connection sequence and returns immediately. Status of the connection can then checked from NetworkInterface::get_connection_status() or from status callbacks.

NetworkInterface internally handles reconnections until disconnect() is called.

Returns

NSAPI_ERROR_OK if connection established in blocking mode.

NSAPI_ERROR_OK if asynchronous operation started.

NSAPI_ERROR_BUSY if asynchronous operation cannot be started. Implementation guarantees event generation, which can be used as an trigger to reissue the rejected request.

NSAPI_ERROR_IS_CONNECTED if already connected.

negative error code on failure.

Implemented in CellularContext, RDAWiFiInterface, InterfaceNanostack, WiFiInterface, CellularInterface, EMACInterface, L3IPInterface, and AT_CellularContext.

Disconnect from the network.

This blocks until interface is disconnected, unless interface is set to asynchronous (non-blocking) mode by calling NetworkInterface::set_blocking(false).

Returns

NSAPI_ERROR_OK on successfully disconnected in blocking mode.

NSAPI_ERROR_OK if asynchronous operation started.

NSAPI_ERROR_BUSY if asynchronous operation cannot be started. Implementation guarantees event generation, which can be used as an trigger to reissue the rejected request.

NSAPI_ERROR_NO_CONNECTION if already disconnected.

negative error code on failure.

Implemented in CellularContext, RDAWiFiInterface, InterfaceNanostack, WiFiInterface, CellularInterface, EMACInterface, L3IPInterface, and AT_CellularContext.

Return pointer to an EMACInterface.

Returns

Pointer to requested interface type or NULL if this class doesn't implement the interface.

Reimplemented in EMACInterface.

Definition at line 354 of file NetworkInterface.h.

Return pointer to an EthInterface.

Returns

Pointer to requested interface type or NULL if this class doesn't implement the interface.

Reimplemented in EthInterface.

Definition at line 320 of file NetworkInterface.h.

Get the connection status.

Returns

The connection status (

See also

nsapi_types.h).

Reimplemented in EMACInterface, L3IPInterface, InterfaceNanostack, and AT_CellularContext.

Return the default network interface.

Returns the default network interface, as determined by JSON option target.network-default-interface-type or other overrides.

The type of the interface returned can be tested by calling ethInterface(), wifiInterface(), meshInterface(), cellularInterface(), emacInterface() and checking for NULL pointers.

The default behavior is to return the default interface for the interface type specified by target.network-default-interface-type. Targets should set this in their targets.json to guide default selection, and applications may override.

The interface returned should be already configured for use such that its connect() method works with no parameters. For connection types needing configuration, settings should normally be obtained from JSON - the settings for the core types are under the "nsapi" JSON config tree.

The list of possible settings for default interface type is open-ended, as is the number of possible providers. Core providers are:

• ETHERNET: EthernetInterface, using default EMAC and OnboardNetworkStack
• MESH: ThreadInterface or LoWPANNDInterface, using default NanostackRfPhy
• CELLULAR: OnboardModemInterface
• WIFI: None - always provided by a specific class

Specific drivers may be activated by other settings of the default-network-interface-type configuration. This will depend on the target and the driver. For example a board may have its default setting as "AUTO" which causes it to autodetect an Ethernet cable. This should be described in the target's documentation.

An application can override all target settings by implementing NetworkInterface::get_default_instance() themselves - the default definition is weak, and calls get_target_default_instance().

Get the local gateway.

Returns

Null-terminated representation of the local gateway or null if no network mask has been received.

Reimplemented in CellularContext, EMACInterface, CellularInterface, L3IPInterface, and AT_CellularContext.

Get the network interface name.

Returns

Null-terminated representation of the network interface name or null if interface not exists

Reimplemented in EMACInterface, and L3IPInterface.

Get the local IP address.

Returns

Null-terminated representation of the local IP address or null if not yet connected

Reimplemented in CellularContext, EMACInterface, CellularInterface, InterfaceNanostack, L3IPInterface, and AT_CellularContext.

Get the local MAC address.

Provided MAC address is intended for info or debug purposes and may be not provided if the underlying network interface does not provide a MAC address.

Returns

Null-terminated representation of the local MAC address or null if no MAC address is available.

Reimplemented in InterfaceNanostack, and EMACInterface.

Get the local network mask.

Returns

Null-terminated representation of the local network mask or null if no network mask has been received.

Reimplemented in CellularContext, EMACInterface, CellularInterface, L3IPInterface, and AT_CellularContext.

Translate a hostname to an IP address with specific version using network interface name.

The hostname may be either a domain name or an IP address. If the hostname is an IP address, no network transactions will be performed.

If no stack-specific DNS resolution is provided, the hostname will be resolve using a UDP socket on the stack.

Parameters

host	Hostname to resolve.
address	Pointer to a SocketAddress to store the result.
version	IP version of address to resolve, NSAPI_UNSPEC indicates version is chosen by the stack (defaults to NSAPI_UNSPEC).
interface_name	Network interface name

Returns

NSAPI_ERROR_OK on success, negative error code on failure.

Implements DNS.

Translate a hostname to an IP address (asynchronous) using network interface name.

The hostname may be either a domain name or a dotted IP address. If the hostname is an IP address, no network transactions will be performed.

If no stack-specific DNS resolution is provided, the hostname will be resolve using a UDP socket on the stack.

Call is non-blocking. Result of the DNS operation is returned by the callback. If this function returns failure, callback will not be called. In case result is success (IP address was found from DNS cache), callback will be called before function returns.

Parameters

host	Hostname to resolve.
callback	Callback that is called for result.
version	IP version of address to resolve, NSAPI_UNSPEC indicates version is chosen by the stack (defaults to NSAPI_UNSPEC).
interface_name	Network interface name

Returns

0 on immediate success, negative error code on immediate failure or a positive unique id that represents the hostname translation operation and can be passed to cancel.

Implements DNS.

Cancel asynchronous hostname translation.

When translation is cancelled, callback will not be called.

Parameters

id	Unique id of the hostname translation operation (returned by gethostbyname_async)

Returns

NSAPI_ERROR_OK on success, negative error code on failure.

Implements DNS.

Return pointer to a MeshInterface.

Returns

Pointer to requested interface type or NULL if this class doesn't implement the interface.

Reimplemented in MeshInterface.

Definition at line 336 of file NetworkInterface.h.

Remove event listener from interface.

Remove previously added callback from the handler list.

Parameters

status_cb

The callback to unregister.

Set network interface as default one.

Reimplemented in EMACInterface, and L3IPInterface.

Set asynchronous operation of connect() and disconnect() calls.

By default, interfaces are in synchronous mode which means that connect() or disconnect() blocks until it reach the target state or requested operation fails.

Parameters

blocking

Use true to set NetworkInterface in asynchronous mode.

Returns

NSAPI_ERROR_OK on success

NSAPI_ERROR_UNSUPPORTED if driver does not support asynchronous mode.

negative error code on failure.

Reimplemented in EMACInterface, L3IPInterface, InterfaceNanostack, CellularContext, and AT_CellularContext.

defined(DOXYGEN_ONLY)

Set default parameters on an interface.

A network interface instantiated directly or using calls such as WiFiInterface::get_default_instance() is initially unconfigured. This call can be used to set the default parameters that would have been set if the interface had been requested using NetworkInterface::get_default_instance() (see nsapi JSON configuration).

Reimplemented in CellularInterface, and WiFiInterface.

Enable or disable DHCP on connecting the network.

Enabled by default unless a static IP address has been assigned. Requires that the network is disconnected.

Parameters

dhcp	True to enable DHCP.

Returns

NSAPI_ERROR_OK on success, negative error code on failure.

Reimplemented in EMACInterface, and L3IPInterface.

Configure this network interface to use a static IP address.

Implicitly disables DHCP, which can be enabled in set_dhcp. Requires that the network is disconnected.

Parameters

ip_address	Null-terminated representation of the local IP address
netmask	Null-terminated representation of the local network mask
gateway	Null-terminated representation of the local gateway

Returns

NSAPI_ERROR_OK on success, negative error code on failure

Reimplemented in EMACInterface, and L3IPInterface.

Return pointer to a WiFiInterface.

Returns

Pointer to requested interface type or NULL if this class doesn't implement the interface.

Reimplemented in WiFiInterface.

Definition at line 328 of file NetworkInterface.h.