Mbed OS Reference | TLSSocketWrapper.h Source File

Go to the documentation of this file.
 /** @file TLSSocketWrapper.h TLSSocketWrapper */
 /*
  * Copyright (c) 2018 ARM Limited
  * SPDX-License-Identifier: Apache-2.0
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *     http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
 /** @addtogroup netsocket
 * @{
 */
 
 #ifndef _MBED_HTTPS_TLS_SOCKET_WRAPPER_H_
 #define _MBED_HTTPS_TLS_SOCKET_WRAPPER_H_
 
 #include "netsocket/Socket.h"
 #include "rtos/EventFlags.h"
 #include "platform/Callback.h"
 #include "mbedtls/platform.h"
 #include "mbedtls/ssl.h"
 #include "mbedtls/entropy.h"
 #include "mbedtls/ctr_drbg.h"
 #include "mbedtls/error.h"
 
 // This class requires Mbed TLS SSL/TLS client code
 #if defined(MBEDTLS_SSL_CLI_C) || defined(DOXYGEN_ONLY)
 
 /**
  * TLSSocket is a wrapper around Socket for interacting with TLS servers.
  *
  * TLSSocketWrapper can use any Socket as a transport. After
  * completing the TLS handshake, it can be used as any Socket would be used.
  *
  */
 class TLSSocketWrapper : public Socket {
 public:
     /** Transport modes */
     enum control_transport {
         TRANSPORT_KEEP,                 /**< Doesn't call connect() or close() on transport socket */
         TRANSPORT_CONNECT_AND_CLOSE,    /**< Does call connect() and close() on transport socket */
         TRANSPORT_CONNECT,              /**< Does call only connect() on transport socket */
         TRANSPORT_CLOSE,                /**< Does call close() on transport socket */
     };
 
     /** Create a TLSSocketWrapper.
      *
      * @param transport    Underlying transport socket to wrap.
      * @param hostname     Hostname of the remote host, used for certificate checking.
      * @param control      Transport control mode. See @ref control_transport.
      */
     TLSSocketWrapper(Socket *transport, const char *hostname = NULL, control_transport control = TRANSPORT_CONNECT_AND_CLOSE);
 
     /** Destroy a socket wrapper.
      *
      *  Closes socket wrapper if the socket wrapper is still open.
      */
     virtual ~TLSSocketWrapper();
 
     /** Set hostname.
      *
      * TLSSocket requires hostname used to verify the certificate.
      * If hostname is not given in constructor, this function must be used before
      * starting the TLS handshake.
      *
      * @param hostname     Hostname of the remote host, used for certificate checking.
      */
     void set_hostname(const char *hostname);
 
     /** Sets the certification of Root CA.
      *
      * @note Must be called before calling connect()
      *
      * @param root_ca Root CA Certificate in any Mbed TLS-supported format.
      * @param len     Length of certificate (including terminating 0 for PEM).
      * @return        0 on success, negative error code on failure.
      */
     nsapi_error_t set_root_ca_cert(const void *root_ca, size_t len);
 
     /** Sets the certification of Root CA.
      *
      * @note Must be called before calling connect()
      *
      * @param root_ca_pem Root CA Certificate in PEM format.
      */
     nsapi_error_t set_root_ca_cert(const char *root_ca_pem);
 
     /** Sets client certificate, and client private key.
      *
      * @param client_cert Client certification in PEM or DER format.
      * @param client_cert_len Certificate size including the terminating null byte for PEM data.
      * @param client_private_key_pem Client private key in PEM or DER format.
      * @param client_private_key_len Key size including the terminating null byte for PEM data
      * @return   0 on success, negative error code on failure.
      */
     nsapi_error_t set_client_cert_key(const void *client_cert, size_t client_cert_len,
                                       const void *client_private_key_pem, size_t client_private_key_len);
 
     /** Sets client certificate, and client private key.
      *
      * @param client_cert_pem Client certification in PEM format.
      * @param client_private_key_pem Client private key in PEM format.
      * @return   0 on success, negative error code on failure.
      */
     nsapi_error_t set_client_cert_key(const char *client_cert_pem, const char *client_private_key_pem);
 
     /** Send data over a TLS socket.
      *
      *  The socket must be connected to a remote host. Returns the number of
      *  bytes sent from the buffer.
      *
      *  @param data     Buffer of data to send to the host.
      *  @param size     Size of the buffer in bytes.
      *  @return         Number of sent bytes on success, negative error code on failure.
      */
     virtual nsapi_error_t send(const void *data, nsapi_size_t size);
 
     /** Receive data over a TLS socket.
      *
      *  The socket must be connected to a remote host. Returns the number of
      *  bytes received into the buffer.
      *
      *  @param data     Destination buffer for data received from the host.
      *  @param size     Size of the buffer in bytes.
      *  @return         Number of received bytes on success, negative error
      *                  code on failure. If no data is available to be received
      *                  and the peer has performed an orderly shutdown,
      *                  recv() returns 0.
      */
     virtual nsapi_size_or_error_t recv(void *data, nsapi_size_t size);
 
     /* = Functions inherited from Socket = */
     virtual nsapi_error_t close();
     /*
      *  @note: In case connect() returns an error, the state of the socket is
      *  unspecified. A new socket should be created before reconnecting.
      */
     virtual nsapi_error_t connect(const SocketAddress &address = SocketAddress());
     virtual nsapi_size_or_error_t sendto(const SocketAddress &address, const void *data, nsapi_size_t size);
     virtual nsapi_size_or_error_t recvfrom(SocketAddress *address,
                                            void *data, nsapi_size_t size);
     virtual nsapi_error_t bind(const SocketAddress &address);
     virtual void set_blocking(bool blocking);
     virtual void set_timeout(int timeout);
     virtual void sigio(mbed::Callback<void()> func);
     virtual nsapi_error_t setsockopt(int level, int optname, const void *optval, unsigned optlen);
     virtual nsapi_error_t getsockopt(int level, int optname, void *optval, unsigned *optlen);
     virtual Socket *accept(nsapi_error_t *error = NULL);
     virtual nsapi_error_t listen(int backlog = 1);
     virtual nsapi_error_t getpeername(SocketAddress *address);
 
 #if defined(MBEDTLS_X509_CRT_PARSE_C) || defined(DOXYGEN_ONLY)
     /** Get own certificate directly from Mbed TLS.
      *
      * @return Internal Mbed TLS X509 structure.
      */
     mbedtls_x509_crt *get_own_cert();
 
     /** Set own certificate directly to Mbed TLS.
      *
      * @param crt Mbed TLS X509 certificate chain.
      * @return error code from mbedtls_ssl_conf_own_cert().
      */
     int set_own_cert(mbedtls_x509_crt *crt);
 
     /** Get CA chain structure.
      *
      * @return Mbed TLS X509 certificate chain.
      */
     mbedtls_x509_crt *get_ca_chain();
 
     /** Set CA chain directly to Mbed TLS.
      *
      * @param crt Mbed TLS X509 certificate chain.
      */
     void set_ca_chain(mbedtls_x509_crt *crt);
 #endif
 
     /** Get internal Mbed TLS configuration structure.
      *
      * @return Mbed TLS SSL config.
      */
     mbedtls_ssl_config *get_ssl_config();
 
     /** Override Mbed TLS configuration.
      *
      * @param conf Mbed TLS SSL configuration structure.
      */
     void set_ssl_config(mbedtls_ssl_config *conf);
 
     /** Get internal Mbed TLS context structure.
      *
      * @return SSL context.
      */
     mbedtls_ssl_context *get_ssl_context();
 
 protected:
 #ifndef DOXYGEN_ONLY
     /** Initiates TLS Handshake.
      *
      *  Initiates a TLS handshake to a remote peer.
      *  Underlying transport socket should already be connected.
      *
      *  Root CA certification must be set by set_ssl_ca_pem() before
      *  calling this function.
      *
      *  For non-blocking purposes, this functions needs to know whether this
      *  was a first call to Socket::connect() API so that NSAPI_ERROR_INPROGRESS
      *  does not happen twice.
      *
      *  @param        first_call is this a first call to Socket::connect() API.
      *  @return       0 on success, negative error code on failure
      */
     nsapi_error_t start_handshake(bool first_call);
 
     bool is_handshake_started() const;
 
     void event();
 #endif
 
 
 
 private:
     /** Continue already initialized handshake */
     nsapi_error_t continue_handshake();
     /**
      * Helper for pretty-printing Mbed TLS error codes
      */
     static void print_mbedtls_error(const char *name, int err);
 
 #if MBED_CONF_TLS_SOCKET_DEBUG_LEVEL > 0
     /**
      * Debug callback for Mbed TLS
      * Just prints on the USB serial port
      */
     static void my_debug(void *ctx, int level, const char *file, int line,
                          const char *str);
 
     /**
      * Certificate verification callback for Mbed TLS
      * Here we only use it to display information on each cert in the chain
      */
     static int my_verify(void *data, mbedtls_x509_crt *crt, int depth, uint32_t *flags);
 
 #endif /* MBED_CONF_TLS_SOCKET_DEBUG_LEVEL > 0 */
 
     /**
      * Receive callback for Mbed TLS
      */
     static int ssl_recv(void *ctx, unsigned char *buf, size_t len);
 
     /**
      * Send callback for Mbed TLS
      */
     static int ssl_send(void *ctx, const unsigned char *buf, size_t len);
 
     mbedtls_ssl_context _ssl;
 #ifdef MBEDTLS_X509_CRT_PARSE_C
     mbedtls_pk_context _pkctx;
 #endif
     mbedtls_ctr_drbg_context _ctr_drbg;
     mbedtls_entropy_context _entropy;
 
     rtos::EventFlags _event_flag;
     mbed::Callback<void()> _sigio;
     Socket *_transport;
     int _timeout;
 
 #ifdef MBEDTLS_X509_CRT_PARSE_C
     mbedtls_x509_crt *_cacert;
     mbedtls_x509_crt *_clicert;
 #endif
     mbedtls_ssl_config *_ssl_conf;
 
     bool _connect_transport: 1;
     bool _close_transport: 1;
     bool _tls_initialized: 1;
     bool _handshake_completed: 1;
     bool _cacert_allocated: 1;
     bool _clicert_allocated: 1;
     bool _ssl_conf_allocated: 1;
 
 };
 
 #endif /* MBEDTLS_SSL_CLI_C */
 #endif // _MBED_HTTPS_TLS_SOCKET_WRAPPER_H_
 /** @} */
Important Information for this Arm website
