Mistake on this page?
Report an issue in GitHub or email us
TELIT_ME310.h
1 /*
2  * Copyright (c) 2020, Arm Limited and affiliates.
3  * SPDX-License-Identifier: Apache-2.0
4  *
5  * Licensed under the Apache License, Version 2.0 (the "License");
6  * you may not use this file except in compliance with the License.
7  * You may obtain a copy of the License at
8  *
9  * http://www.apache.org/licenses/LICENSE-2.0
10  *
11  * Unless required by applicable law or agreed to in writing, software
12  * distributed under the License is distributed on an "AS IS" BASIS,
13  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14  * See the License for the specific language governing permissions and
15  * limitations under the License.
16  */
17 
18 #ifndef CELLULAR_TARGETS_TELIT_ME310_TELIT_ME310_H_
19 #define CELLULAR_TARGETS_TELIT_ME310_TELIT_ME310_H_
20 
21 #ifdef TARGET_FF_ARDUINO
22 #ifndef MBED_CONF_TELIT_ME310_TX
23 #define MBED_CONF_TELIT_ME310_TX D1
24 #endif
25 #ifndef MBED_CONF_TELIT_ME310_RX
26 #define MBED_CONF_TELIT_ME310_RX D0
27 #endif
28 #endif /* TARGET_FF_ARDUINO */
29 
30 #include "DigitalOut.h"
31 #include "AT_CellularDevice.h"
32 
33 namespace mbed {
34 
36 public:
37  /**
38  * Constructs the Telit ME310 series driver. It is mandatory to provide
39  * a FileHandle object, the power pin and the polarity of the pin.
40  */
41  TELIT_ME310(FileHandle *fh, PinName pwr, bool active_high);
42 
43 protected: // AT_CellularDevice
44  virtual AT_CellularContext *create_context_impl(ATHandler &at, const char *apn, bool cp_req = false, bool nonip_req = false);
45  virtual nsapi_error_t init();
46  virtual nsapi_error_t hard_power_on();
47  virtual nsapi_error_t hard_power_off();
48  virtual nsapi_error_t soft_power_on();
49  virtual nsapi_error_t soft_power_off();
51 
52 private:
53  bool _active_high;
54  DigitalOut _pwr_key;
55 };
56 } // namespace mbed
57 #endif /* CELLULAR_TARGETS_TELIT_ME310_TELIT_ME310_H_ */
virtual nsapi_error_t soft_power_off()
Powers down the modem.
signed int nsapi_error_t
Type used to represent error codes.
Definition: nsapi_types.h:142
Class FileHandle.
Definition: FileHandle.h:46
TELIT_ME310(FileHandle *fh, PinName pwr, bool active_high)
Constructs the Telit ME310 series driver.
virtual AT_CellularContext * create_context_impl(ATHandler &at, const char *apn, bool cp_req=false, bool nonip_req=false)
Creates new instance of AT_CellularContext or if overridden, modem specific implementation.
virtual nsapi_error_t hard_power_off()
Sets the modem in unplugged state.
virtual nsapi_error_t soft_power_on()
Powers up the modem.
virtual AT_CellularNetwork * open_network_impl(ATHandler &at)
Create new instance of AT_CellularNetwork or if overridden, modem specific implementation.
Class AT_CellularDevice.
virtual nsapi_error_t init()
Initialize cellular device must be called right after the module is ready.
A digital output, used for setting the state of a pin.
Definition: DigitalOut.h:51
Class AT_CellularNetwork.
virtual nsapi_error_t hard_power_on()
Sets the modem up for powering on This is equivalent to plugging in the device, i.e., attaching power and serial port.
Definition: ATHandler.h:46
Class for sending AT commands and parsing AT responses.
Definition: ATHandler.h:68
Important Information for this Arm website

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies. If you are not happy with the use of these cookies, please review our Cookie Policy to learn how they can be disabled. By disabling cookies, some features of the site will not work.