Life is random and unfair!
Fork of mbed-dev by
SPISlave Class Reference
[Drivers]
A SPI slave, used for communicating with a SPI Master device. More...
#include <SPISlave.h>
Public Member Functions | |
SPISlave (PinName mosi, PinName miso, PinName sclk, PinName ssel) | |
Create a SPI slave connected to the specified pins. | |
void | format (int bits, int mode=0) |
Configure the data transmission format. | |
void | frequency (int hz=1000000) |
Set the spi bus clock frequency. | |
int | receive (void) |
Polls the SPI to see if data has been received. | |
int | read (void) |
Retrieve data from receive buffer as slave. | |
void | reply (int value) |
Fill the transmission buffer with the value to be written out as slave on the next received message from the master. |
Detailed Description
A SPI slave, used for communicating with a SPI Master device.
The default format is set to 8-bits, mode 0, and a clock frequency of 1MHz
Synchronization level: Not protected
Example:
// Reply to a SPI master as slave #include "mbed.h" SPISlave device(p5, p6, p7, p8); // mosi, miso, sclk, ssel int main() { device.reply(0x00); // Prime SPI with first reply while(1) { if(device.receive()) { int v = device.read(); // Read byte from master v = (v + 1) % 0x100; // Add one to it, modulo 256 device.reply(v); // Make this the next reply } } }
Definition at line 55 of file SPISlave.h.
Constructor & Destructor Documentation
SPISlave | ( | PinName | mosi, |
PinName | miso, | ||
PinName | sclk, | ||
PinName | ssel | ||
) |
Generated on Tue Jul 12 2022 19:28:33 by 1.7.2