Diff: Components/otm8009a/otm8009a.c

Revision:

0:0002c86c2220

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/otm8009a/otm8009a.c	Fri Dec 18 07:32:01 2015 +0000
@@ -0,0 +1,449 @@
+/**
+  ******************************************************************************
+  * @file    otm8009a.c
+  * @author  MCD Application Team
+  * @version V1.0.0
+  * @date    03-August-2015
+  * @brief   This file provides the LCD Driver for KoD KM-040TMP-02-0621 (WVGA)
+  *          DSI LCD Display OTM8009A.   
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "otm8009a.h"
+
+/** @addtogroup BSP
+  * @{
+  */
+  
+/** @addtogroup Components
+  * @{
+  */ 
+
+/** @defgroup OTM8009A OTM8009A
+  * @brief     This file provides a set of functions needed to drive the 
+  *            otm8009a IC display driver.
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup OTM8009A_Private_Constants OTM8009A Private Constants
+  * @{
+  */
+
+/*
+ * @brief Constant tables of register settings used to transmit DSI
+ * command packets as power up initialization sequence of the KoD LCD (OTM8009A LCD Driver)
+ */
+const uint8_t lcdRegData1[]  = {0x80,0x09,0x01,0xFF};
+const uint8_t lcdRegData2[]  = {0x80,0x09,0xFF};
+const uint8_t lcdRegData3[]  = {0x00,0x09,0x0F,0x0E,0x07,0x10,0x0B,0x0A,0x04,0x07,0x0B,0x08,0x0F,0x10,0x0A,0x01,0xE1};
+const uint8_t lcdRegData4[]  = {0x00,0x09,0x0F,0x0E,0x07,0x10,0x0B,0x0A,0x04,0x07,0x0B,0x08,0x0F,0x10,0x0A,0x01,0xE2};
+const uint8_t lcdRegData5[]  = {0x79,0x79,0xD8};
+const uint8_t lcdRegData6[]  = {0x00,0x01,0xB3};
+const uint8_t lcdRegData7[]  = {0x85,0x01,0x00,0x84,0x01,0x00,0xCE};
+const uint8_t lcdRegData8[]  = {0x18,0x04,0x03,0x39,0x00,0x00,0x00,0x18,0x03,0x03,0x3A,0x00,0x00,0x00,0xCE};
+const uint8_t lcdRegData9[]  = {0x18,0x02,0x03,0x3B,0x00,0x00,0x00,0x18,0x01,0x03,0x3C,0x00,0x00,0x00,0xCE};
+const uint8_t lcdRegData10[] = {0x01,0x01,0x20,0x20,0x00,0x00,0x01,0x02,0x00,0x00,0xCF};
+const uint8_t lcdRegData11[] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xCB};
+const uint8_t lcdRegData12[] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xCB};
+const uint8_t lcdRegData13[] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xCB};
+const uint8_t lcdRegData14[] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xCB};
+const uint8_t lcdRegData15[] = {0x00,0x04,0x04,0x04,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xCB};
+const uint8_t lcdRegData16[] = {0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x04,0x04,0x04,0x04,0x00,0x00,0x00,0x00,0xCB};
+const uint8_t lcdRegData17[] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xCB};
+const uint8_t lcdRegData18[] = {0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xCB};
+const uint8_t lcdRegData19[] = {0x00,0x26,0x09,0x0B,0x01,0x25,0x00,0x00,0x00,0x00,0xCC};
+const uint8_t lcdRegData20[] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x26,0x0A,0x0C,0x02,0xCC};
+const uint8_t lcdRegData21[] = {0x25,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xCC};
+const uint8_t lcdRegData22[] = {0x00,0x25,0x0C,0x0A,0x02,0x26,0x00,0x00,0x00,0x00,0xCC};
+const uint8_t lcdRegData23[] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x25,0x0B,0x09,0x01,0xCC};
+const uint8_t lcdRegData24[] = {0x26,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xCC};
+const uint8_t lcdRegData25[] = {0xFF,0xFF,0xFF,0xFF};    
+/*
+  * CASET value (Column Address Set) : X direction LCD GRAM boundaries
+  * depending on LCD orientation mode and PASET value (Page Address Set) : Y direction
+  * LCD GRAM boundaries depending on LCD orientation mode
+  * XS[15:0] = 0x000 = 0, XE[15:0] = 0x31F = 799 for landscape mode : apply to CASET
+  * YS[15:0] = 0x000 = 0, YE[15:0] = 0x31F = 799 for portrait mode : : apply to PASET
+  */
+const uint8_t lcdRegData27[] = {0x00, 0x00, 0x03, 0x1F, OTM8009A_CMD_CASET};
+/*
+  * XS[15:0] = 0x000 = 0, XE[15:0] = 0x1DF = 479 for portrait mode : apply to CASET
+  * YS[15:0] = 0x000 = 0, YE[15:0] = 0x1DF = 479 for landscape mode : apply to PASET
+ */
+const uint8_t lcdRegData28[] = {0x00, 0x00, 0x01, 0xDF, OTM8009A_CMD_PASET};
+
+
+const uint8_t ShortRegData1[]  = {OTM8009A_CMD_NOP, 0x00};
+const uint8_t ShortRegData2[]  = {OTM8009A_CMD_NOP, 0x80};
+const uint8_t ShortRegData3[]  = {0xC4, 0x30};
+const uint8_t ShortRegData4[]  = {OTM8009A_CMD_NOP, 0x8A};
+const uint8_t ShortRegData5[]  = {0xC4, 0x40};
+const uint8_t ShortRegData6[]  = {OTM8009A_CMD_NOP, 0xB1};
+const uint8_t ShortRegData7[]  = {0xC5, 0xA9};
+const uint8_t ShortRegData8[]  = {OTM8009A_CMD_NOP, 0x91};
+const uint8_t ShortRegData9[]  = {0xC5, 0x34};
+const uint8_t ShortRegData10[] = {OTM8009A_CMD_NOP, 0xB4};
+const uint8_t ShortRegData11[] = {0xC0, 0x50};
+const uint8_t ShortRegData12[] = {0xD9, 0x4E};
+const uint8_t ShortRegData13[] = {OTM8009A_CMD_NOP, 0x81};
+const uint8_t ShortRegData14[] = {0xC1, 0x66};
+const uint8_t ShortRegData15[] = {OTM8009A_CMD_NOP, 0xA1};
+const uint8_t ShortRegData16[] = {0xC1, 0x08};
+const uint8_t ShortRegData17[] = {OTM8009A_CMD_NOP, 0x92};
+const uint8_t ShortRegData18[] = {0xC5, 0x01};
+const uint8_t ShortRegData19[] = {OTM8009A_CMD_NOP, 0x95};
+const uint8_t ShortRegData20[] = {OTM8009A_CMD_NOP, 0x94};
+const uint8_t ShortRegData21[] = {0xC5, 0x33};
+const uint8_t ShortRegData22[] = {OTM8009A_CMD_NOP, 0xA3};
+const uint8_t ShortRegData23[] = {0xC0, 0x1B};
+const uint8_t ShortRegData24[] = {OTM8009A_CMD_NOP, 0x82};
+const uint8_t ShortRegData25[] = {0xC5, 0x83};
+const uint8_t ShortRegData26[] = {0xC4, 0x83};
+const uint8_t ShortRegData27[] = {0xC1, 0x0E};
+const uint8_t ShortRegData28[] = {OTM8009A_CMD_NOP, 0xA6};
+const uint8_t ShortRegData29[] = {OTM8009A_CMD_NOP, 0xA0};
+const uint8_t ShortRegData30[] = {OTM8009A_CMD_NOP, 0xB0};
+const uint8_t ShortRegData31[] = {OTM8009A_CMD_NOP, 0xC0};
+const uint8_t ShortRegData32[] = {OTM8009A_CMD_NOP, 0xD0};
+const uint8_t ShortRegData33[] = {OTM8009A_CMD_NOP, 0x90};
+const uint8_t ShortRegData34[] = {OTM8009A_CMD_NOP, 0xE0};
+const uint8_t ShortRegData35[] = {OTM8009A_CMD_NOP, 0xF0};
+const uint8_t ShortRegData36[] = {OTM8009A_CMD_SLPOUT, 0x00};
+const uint8_t ShortRegData37[] = {OTM8009A_CMD_COLMOD, OTM8009A_COLMOD_RGB565};
+const uint8_t ShortRegData38[] = {OTM8009A_CMD_COLMOD, OTM8009A_COLMOD_RGB888};
+const uint8_t ShortRegData39[] = {OTM8009A_CMD_MADCTR, OTM8009A_MADCTR_MODE_LANDSCAPE};
+const uint8_t ShortRegData40[] = {OTM8009A_CMD_WRDISBV, 0x7F};
+const uint8_t ShortRegData41[] = {OTM8009A_CMD_WRCTRLD, 0x2C};
+const uint8_t ShortRegData42[] = {OTM8009A_CMD_WRCABC, 0x02};
+const uint8_t ShortRegData43[] = {OTM8009A_CMD_WRCABCMB, 0xFF};
+const uint8_t ShortRegData44[] = {OTM8009A_CMD_DISPON, 0x00};
+const uint8_t ShortRegData45[] = {OTM8009A_CMD_RAMWR, 0x00};
+const uint8_t ShortRegData46[] = {0xCF, 0x00};
+const uint8_t ShortRegData47[] = {0xC5, 0x66};
+const uint8_t ShortRegData48[] = {OTM8009A_CMD_NOP, 0xB6};
+const uint8_t ShortRegData49[] = {0xF5, 0x06};
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup OTM8009A_Exported_Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions ---------------------------------------------------------*/
+/** @defgroup OTM8009A_Exported_Functions OTM8009A Exported Functions
+  * @{
+  */
+
+/**
+  * @brief  DSI IO write short/long command.
+  * @note : Can be surcharged by application code implementation of the function.
+  */
+__weak void DSI_IO_WriteCmd(uint32_t NbrParams, uint8_t *pParams)
+{
+  /* NOTE : This function Should not be modified, when it is needed,
+            the DSI_IO_WriteCmd could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Initializes the LCD KoD display part by communication in DSI mode in Video Mode
+  *         with IC Display Driver OTM8009A (see IC Driver specification for more information).
+  * @param  hdsi_eval : pointer on DSI configuration structure
+  * @param  hdsivideo_handle : pointer on DSI video mode configuration structure
+  * @retval Status
+  */
+uint8_t OTM8009A_Init(uint32_t ColorCoding, uint32_t orientation)
+{
+  /* Enable CMD2 to access vendor specific commands                               */
+  /* Enter in command 2 mode and set EXTC to enable address shift function (0x00) */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData1);
+  DSI_IO_WriteCmd( 3, (uint8_t *)lcdRegData1);
+
+  /* Enter ORISE Command 2 */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData2); /* Shift address to 0x80 */
+  DSI_IO_WriteCmd( 2, (uint8_t *)lcdRegData2);
+
+  /////////////////////////////////////////////////////////////////////
+  /* SD_PCH_CTRL - 0xC480h - 129th parameter - Default 0x00          */
+  /* Set SD_PT                                                       */
+  /* -> Source output level during porch and non-display area to GND */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData2);
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData3);
+  OTM8009A_IO_Delay(10);
+  /* Not documented */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData4);
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData5);
+  OTM8009A_IO_Delay(10);
+  /////////////////////////////////////////////////////////////////////
+
+  /* PWR_CTRL4 - 0xC4B0h - 178th parameter - Default 0xA8 */
+  /* Set gvdd_en_test                                     */
+  /* -> enable GVDD test mode !!!                         */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData6);
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData7);
+
+  /* PWR_CTRL2 - 0xC590h - 146th parameter - Default 0x79      */
+  /* Set pump 4 vgh voltage                                    */
+  /* -> from 15.0v down to 13.0v                               */
+  /* Set pump 5 vgh voltage                                    */
+  /* -> from -12.0v downto -9.0v                               */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData8);
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData9);
+
+  /* P_DRV_M - 0xC0B4h - 181th parameter - Default 0x00 */
+  /* -> Column inversion                                */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData10);
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData11);
+
+  /* VCOMDC - 0xD900h - 1st parameter - Default 0x39h */
+  /* VCOM Voltage settings                            */
+  /* -> from -1.0000v downto -1.2625v                 */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData1);
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData12);
+
+  /* Oscillator adjustment for Idle/Normal mode (LPDT only) set to 65Hz (default is 60Hz) */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData13);
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData14);
+
+  /* Video mode internal */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData15);
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData16);
+
+  /* PWR_CTRL2 - 0xC590h - 147h parameter - Default 0x00 */
+  /* Set pump 4&5 x6                                     */
+  /* -> ONLY VALID when PUMP4_EN_ASDM_HV = "0"           */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData17);
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData18);
+
+  /* PWR_CTRL2 - 0xC590h - 150th parameter - Default 0x33h */
+  /* Change pump4 clock ratio                              */
+  /* -> from 1 line to 1/2 line                            */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData19);
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData9);
+
+  /* GVDD/NGVDD settings */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData1);
+  DSI_IO_WriteCmd( 2, (uint8_t *)lcdRegData5);
+
+  /* PWR_CTRL2 - 0xC590h - 149th parameter - Default 0x33h */
+  /* Rewrite the default value !                           */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData20);
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData21);
+
+  /* Panel display timing Setting 3 */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData22);
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData23);
+
+  /* Power control 1 */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData24);
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData25);
+
+  /* Source driver precharge */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData13);
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData26);
+
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData15);
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData27);
+
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData28);
+  DSI_IO_WriteCmd( 2, (uint8_t *)lcdRegData6);
+
+  /* GOAVST */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData2);
+  DSI_IO_WriteCmd( 6, (uint8_t *)lcdRegData7);
+
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData29);
+  DSI_IO_WriteCmd( 14, (uint8_t *)lcdRegData8);
+
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData30);
+  DSI_IO_WriteCmd( 14, (uint8_t *)lcdRegData9);
+
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData31);
+  DSI_IO_WriteCmd( 10, (uint8_t *)lcdRegData10);
+
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData32);
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData46);
+
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData2);
+  DSI_IO_WriteCmd( 10, (uint8_t *)lcdRegData11);
+
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData33);
+  DSI_IO_WriteCmd( 15, (uint8_t *)lcdRegData12);
+
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData29);
+  DSI_IO_WriteCmd( 15, (uint8_t *)lcdRegData13);
+
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData30);
+  DSI_IO_WriteCmd( 10, (uint8_t *)lcdRegData14);
+
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData31);
+  DSI_IO_WriteCmd( 15, (uint8_t *)lcdRegData15);
+
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData32);
+  DSI_IO_WriteCmd( 15, (uint8_t *)lcdRegData16);
+
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData34);
+  DSI_IO_WriteCmd( 10, (uint8_t *)lcdRegData17);
+
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData35);
+  DSI_IO_WriteCmd( 10, (uint8_t *)lcdRegData18);
+
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData2);
+  DSI_IO_WriteCmd( 10, (uint8_t *)lcdRegData19);
+
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData33);
+  DSI_IO_WriteCmd( 15, (uint8_t *)lcdRegData20);
+
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData29);
+  DSI_IO_WriteCmd( 15, (uint8_t *)lcdRegData21);
+
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData30);
+  DSI_IO_WriteCmd( 10, (uint8_t *)lcdRegData22);
+
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData31);
+  DSI_IO_WriteCmd( 15, (uint8_t *)lcdRegData23);
+
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData32);
+  DSI_IO_WriteCmd( 15, (uint8_t *)lcdRegData24);
+
+  /////////////////////////////////////////////////////////////////////////////
+  /* PWR_CTRL1 - 0xc580h - 130th parameter - default 0x00 */
+  /* Pump 1 min and max DM                                */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData13);
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData47);
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData48);
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData49);
+  /////////////////////////////////////////////////////////////////////////////
+
+  /* Exit CMD2 mode */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData1);
+  DSI_IO_WriteCmd( 3, (uint8_t *)lcdRegData25);
+
+  /*************************************************************************** */
+  /* Standard DCS Initialization TO KEEP CAN BE DONE IN HSDT                   */
+  /*************************************************************************** */
+
+  /* NOP - goes back to DCS std command ? */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData1);
+          
+  /* Gamma correction 2.2+ table (HSDT possible) */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData1);
+  DSI_IO_WriteCmd( 16, (uint8_t *)lcdRegData3);
+  
+  /* Gamma correction 2.2- table (HSDT possible) */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData1);
+  DSI_IO_WriteCmd( 16, (uint8_t *)lcdRegData4);
+          
+  /* Send Sleep Out command to display : no parameter */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData36);
+  
+  /* Wait for sleep out exit */
+  OTM8009A_IO_Delay(120);
+
+  switch(ColorCoding)
+  {
+  case OTM8009A_FORMAT_RBG565 :
+    /* Set Pixel color format to RGB565 */
+    DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData37);
+    break;
+  case OTM8009A_FORMAT_RGB888 :
+    /* Set Pixel color format to RGB888 */
+    DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData38);
+    break;
+  default :
+    break;
+  }
+
+  /* Send command to configure display in landscape orientation mode. By default
+      the orientation mode is portrait  */
+  if(orientation == OTM8009A_ORIENTATION_LANDSCAPE)
+  {
+    DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData39);
+    DSI_IO_WriteCmd( 4, (uint8_t *)lcdRegData27);
+    DSI_IO_WriteCmd( 4, (uint8_t *)lcdRegData28);
+  }
+
+  /** CABC : Content Adaptive Backlight Control section start >> */
+  /* Note : defaut is 0 (lowest Brightness), 0xFF is highest Brightness, try 0x7F : intermediate value */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData40);
+
+  /* defaut is 0, try 0x2C - Brightness Control Block, Display Dimming & BackLight on */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData41);
+
+  /* defaut is 0, try 0x02 - image Content based Adaptive Brightness [Still Picture] */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData42);
+
+  /* defaut is 0 (lowest Brightness), 0xFF is highest Brightness */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData43);
+
+  /** CABC : Content Adaptive Backlight Control section end << */
+
+  /* Send Command Display On */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData44);
+
+  /* NOP command */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData1);
+
+  /* Send Command GRAM memory write (no parameters) : this initiates frame write via other DSI commands sent by */
+  /* DSI host from LTDC incoming pixels in video mode */
+  DSI_IO_WriteCmd(0, (uint8_t *)ShortRegData45);
+
+  return 0;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/