Diff: main.cpp

Revision:

1:5147d3fa7816

Parent:

0:f739ace74102

Child:

2:1592223f12e1

--- a/main.cpp	Mon Feb 17 21:39:28 2014 +0000
+++ b/main.cpp	Mon Feb 17 22:26:04 2014 +0000
@@ -2,10 +2,93 @@
 #include "config.h"
 #include "debug.h"
 
+// Multitech Cellular includes
+#include "Cellular.h"
+#include "Endpoint.h"
+#include "IPStack.h"
+#include "MTSSerialFlowControl.h"
+
+using namespace mts;
+
+Cellular* cellular;
+
+// ****************************************************************************
+// Cellular initialization
+
+static void cellular_init()
+{
+
+    //Setup serial interface to radio
+    MTSSerialFlowControl* serial = new MTSSerialFlowControl(PTD3, PTD2, PTA12, PTC8);
+    serial->baud(115200);
+
+    //Setup Cellular class
+    cellular = Cellular::getInstance();
+    cellular->init(serial, PTA4, PTC9); //DCD and DTR pins for KL46Z
+
+    //Run status and configuration commands
+    DEBUG("\n\r////Start Status and Configuration Commands////");
+    DEBUG("Command Test: %s", getCodeNames(cellular->test()).c_str()); //Make sure you can talk to the radio
+    DEBUG("Signal Strength: %d", cellular->getSignalStrength()); //Check the signal strength should be above 8
+    
+    //Makes sure you are reistered with cell
+    DEBUG("Registration State: %s", Cellular::getRegistrationNames(cellular->getRegistration()).c_str()); 
+    
+    //Shows example of how to send other commands, look at AT command guide for more info
+    DEBUG("Send Basic Command (AT): %s", getCodeNames(cellular->sendBasicCommand("AT", 1000)).c_str());
+    DEBUG("Send Command (AT+CSQ): %s", cellular->sendCommand("AT+CSQ", 1000).c_str());
+
+    //Start Test
+    DEBUG("\n\r////Start Network Connectivity Test////");
+    DEBUG("Set APN: %s", getCodeNames(cellular->setApn(CELLULAR_APN)).c_str()); //Use APN from service provider!!!
+
+    //Setup a data connection
+    DEBUG("Attempting to Connect, this may take some time...");
+    while (!cellular->connect()) {
+        DEBUG("Failed to connect... Trying again.");
+        wait(1);
+    }
+    DEBUG("Connected to the Network!");
+
+    //Try pinging default server "8.8.8.8" (Google's DNS)
+    DEBUG("Ping Valid: %s", cellular->ping() ? "true" : "false");
+    wait(3);
+
+}
+
+// ****************************************************************************
+// NSP initialization
+
+static void nsp_init()
+{
+    // Bind the port
+    cellular->bind(EP_PORT);
+
+    // Open a TCP connection
+    while (!cellular->open(NSP_ADDRESS, NSP_PORT, mts::IPStack::TCP)) 
+    {
+        DEBUG("TCP connection failed.");
+        wait(3);
+    } 
+    DEBUG("TCP connection to NSP successful.");  
+    cellular->write("test", 4, -1);
+    
+//    nsp.set_address(NSP_ADDRESS, NSP_PORT);
+    
+//    DEBUG("name: %s", endpoint_name);
+//    DEBUG("NSP=%s - port %d\n", NSP_ADDRESS, NSP_PORT);
+}
+
 
 int main() 
 {
+    printf("\r\n*****************************************************************************\r\n");
     DEBUG("NanoService Example for KL46Z + Multitech Cellular");
 
+    // Inititalize the Cellular modem
+    cellular_init();
+    
+    // Bind the socket and configure NSP settings
+    nsp_init();
     
 }